Ubuntu Installation :: Unable To Get Boot Menu Once Boot Into Windows7 With Ubuntu Dual Boot?
Aug 11, 2010
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I built this computer with a Gigabyte motherboard, i3 processor, 8Gb ram, 64Gb SSD, and 1.5Tb HDD. Loaded Windows 7 to the SSD... repartitioned the drives and loaded Ubuntu 11.04.The start menu comes up to select Windows 7 or Ubuntu... when I select Ubuntu I get a screen which reads:Windows failed to start. A recent hardware or software change might be the cause. To Fix the problem:1. Insert your windows installation disc and restart your computer.2. Choose your language settings, and the click "Next"3. Click "Repair your computer."if you do not have this disc, contact your sys admin or manufacturer for assistance. File: ubuntuwinbootwubildr.mbrStatus: 0xc0000098Info: The selected entry could not be loaded because the application is missing or corrupt.
This screen continues to come up. I tried to load Ubuntu with Wubi but it would not install... I have now installed it from a DVD but the load screen keeps putting me back to the screen above. I can't load from the Windows CD it won't recognize it even if I change the bios setting.Windows 7 seems to be running fine... and Ubuntu seems to have loaded fine... so how can I get my Windows boot screen to go and load Ubuntu as my OS?
I have done some commands in ubuntu 11.04 and got problems, thinking of reinstall it. (laptop acer 5738zg)
Previously when i have dual booted win7 and ubuntu10 and linux mint i always get "grub rescue" when i try reinstall my linux partition, and it ends with i have to do clean reinstall of both windows and linux, which is a major pain in the rectum area
Is there a way to make my linux go back to original state without reinstall, and if i reinstall, how can I do this without loosing win7 partition and get this awful grub rescue message.
I have a laptop that has a dual boot of Windows7/Ubuntu10.04. Ubuntu loads fine, but Windows 7 does not. It shows up in the Grub, but it will not load. I assume that the boot loader was messed up somehow, but I am not experienced at deciphering the boot info file. I was hoping someone might be able to take a look at the file and tell me what the issue might be, and also which part of the text indicates the problemBoot File:
Code: Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: ===============================
Windows 7 is first boot disk. Installed Fedora 13 on second disk from DVD. During installation it did not ask if I wanted dual boot. Fedora installed fine on second disk. Rebooted and only Windows will lood. How to setup to dual boot? Can I modify Windows Boot file? or do I have to install Grub on to sda. How do I do that?
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
Hi,I had a Windows 7 installation and I decided to install ubuntu 11.04 I tried several times but every time soon or later something with grub goes wrong.Most times I get the error "no such partition",once it just halted after "verifying DMI ... " .I fixed windows mbr with "bootsect /nt60 C:" and then tried to reinstall grub with boot-repair .It showed no errors but after reboot I get "no such partition" again. My scheme is something like :
/dev/sda1 -> the windows 7 system partition NTFS /dev/sda2 -> partition for windows programs etc NTFS /dev/sda3 -> partition for files(images/music/videos) NTFS /dev/sda4 -> extended partition
Finally made the switch over to ubuntu, but I needed to keep my windows7 for several reasons. Let just start by saying I have two hard drives, a 200gig(which holds my windows7 partition) and a 500gig(has a 100gig partition which has ubuntu on it). After finally getting 10.04 to install on the 100gig partition and everything running right, I tried to load up windows7 and got an error.
Something along to lines of "the partition does not exist". I believe I messed up on the last step on the install, as I might of just been careless. I remember reading somewhere that if using multiple hard drives grub may get messed up in one way or another. IS there a way to fix this and make grub realize that window7 is on another partition, or am I out of luck?edit: Id like to add that grub is recognizing windows7, it just will not load off the other partition(I think)
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic
I have a Sony VPCZ13C5E with Intel Core i7 M640 @ 2.8GHz and Windows 7 Prof 64 bit. It has 4 x 122GB SSD's in one Volume type Raid 0 using Intel Rapid Storage Technology.
The installation prog did not offer to install alongside an existing (Win 7) system, however after installation I was able still to boot Win 7 from the Grub Menu, but the Linux option just gives the black screen of death.
Booting from the 10.10 LiveCD and running sudo fdisk - l gives "unable to seek on /dev/sda". Also I have had a message "unknown filesystem type 'isw_raid_member' although I have forgotten where that came from!
The LiveCD shows that the filesystem does seem to have installed OK on the ext4 partion of 100Gb which I had kept for it, however it will not boot.
The results of Boot_info_script are shown in the attachment Results.txt
I have tried sudo mount /dev/mapper/isw_dijbjabefg_Volume07 /mnt and it gives no errors.
I then tried sudo grub-install --root-directory=/mnt/ /dev/sda which gave no errors but when I reboot and choose Linux the result is still the black screen of death.
I understand that the problem may be one of Ubuntu drivers having to catch up with the latest technology but given that Ubuntu can partition the swap file and the ext4 system I seem to be so close.
I have rebuilt my laptop to a dual boot of Ubuntu 10.10 and Windows 7 - if only iTunes would work under wine I wouldn't even have to worry about Windows, but that is the penalty for using an Apple iPod!
Anyway how do I go about about editing the boot options menu? Following the kernel upgrade in the Ubuntu updates I now have two entries for Ubuntu and would like to just tidy it up.
If it is risky let me know because I have the systems working just nice, and really wouldn't want to trash them just for something cosmetic.
I have multiple drives on my system and I decided to put Ubuntu on my main 1TB hard drive. I install 9.10 on my drive and it partitions half of it to Ubuntu and install is successful. Well, on reboot I get nothing. I switch to my secondary drive with windows on it already and the dual boot menu appears? Apparently it installs in on SATA1 and not the drive selected as boot in the BIOS. I decided to leave it this way until recently I needed to use the secondary drive on my other rigs failing hard drive. So, how do I get grub on the 1TB hard drive? I ran windows 7 BOOTREC files and recovered the Windows boot, but I couldn't get Ubuntu to recover with live CD nor the GRUB online help didn't work. Is there a simple way to get my dual boot menu back?
I have Windows XP SP3 running on my Desktop PC and wish to dual boot it with Ubuntu 10.10. This isn't the issue as I can do this and it gives me the GRUB menu but selecting Windows XP won't do anything - or so it seems How long should it take to boot into Windows from the GRUB menu?
my NIC drives me crazy and I need some help to gather all relevant informations to file a decent bug report. Maybe someone could guide me through this process.My mainboard is an AsRock Z68 Pro3
[URL]
I use a dual-boot setup with Windows7 installed in parallel to Fedora 15-x64. Whenever I had Windows in use and jjust reboot the system into Fedora, the NIC does not work as expected. Instead it goes in an endless "em1: link up" loop which results in very low bandwith or even complete network timeouts. This happens in Firefox as well as with yum or ping.
Quote:
Originally Posted by dmesg [ 58.763294] r8169 0000:05:00.0: em1: link up [ 59.686773] r8169 0000:05:00.0: em1: link up [ 61.936454] r8169 0000:05:00.0: em1: link up
[code]....
If I directly cold boot into Fedora (after the power cord has been removed and the system got completely re-initialized) there are no problems at alll and I get a fast and stable network conection. This also happens with other linux distributions, for example SysRescCD.
I have install ubuntu and windows in the same computer in their own partition. I think that I have remove something while I was reinstalling some wireless stuff using synaptic. When I launch the computer I get the dual booting but only with memory test and windows. I have the ubuntu installation cd. What can I do to get back the dual booting with the facility to launch ubuntu.
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement 147 GB for Windows, C: 85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
