Ubuntu Installation :: SSD With Windows7 Won't Dual Boot?
Jun 22, 2011
I built this computer with a Gigabyte motherboard, i3 processor, 8Gb ram, 64Gb SSD, and 1.5Tb HDD. Loaded Windows 7 to the SSD... repartitioned the drives and loaded Ubuntu 11.04.The start menu comes up to select Windows 7 or Ubuntu... when I select Ubuntu I get a screen which reads:Windows failed to start. A recent hardware or software change might be the cause. To Fix the problem:1. Insert your windows installation disc and restart your computer.2. Choose your language settings, and the click "Next"3. Click "Repair your computer."if you do not have this disc, contact your sys admin or manufacturer for assistance. File: ubuntuwinbootwubildr.mbrStatus: 0xc0000098Info: The selected entry could not be loaded because the application is missing or corrupt.
This screen continues to come up. I tried to load Ubuntu with Wubi but it would not install... I have now installed it from a DVD but the load screen keeps putting me back to the screen above. I can't load from the Windows CD it won't recognize it even if I change the bios setting.Windows 7 seems to be running fine... and Ubuntu seems to have loaded fine... so how can I get my Windows boot screen to go and load Ubuntu as my OS?
View 9 Replies
ADVERTISEMENT
May 14, 2011
I have done some commands in ubuntu 11.04 and got problems, thinking of reinstall it. (laptop acer 5738zg)
Previously when i have dual booted win7 and ubuntu10 and linux mint i always get "grub rescue" when i try reinstall my linux partition, and it ends with i have to do clean reinstall of both windows and linux, which is a major pain in the rectum area
Is there a way to make my linux go back to original state without reinstall, and if i reinstall, how can I do this without loosing win7 partition and get this awful grub rescue message.
View 1 Replies
View Related
Jun 11, 2011
I have a laptop that has a dual boot of Windows7/Ubuntu10.04. Ubuntu loads fine, but Windows 7 does not. It shows up in the Grub, but it will not load. I assume that the boot loader was messed up somehow, but I am not experienced at deciphering the boot info file. I was hoping someone might be able to take a look at the file and tell me what the issue might be, and also which part of the text indicates the problemBoot File:
Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
[code]...
View 3 Replies
View Related
Dec 6, 2010
Windows 7 is first boot disk. Installed Fedora 13 on second disk from DVD. During installation it did not ask if I wanted dual boot. Fedora installed fine on second disk. Rebooted and only Windows will lood. How to setup to dual boot? Can I modify Windows Boot file? or do I have to install Grub on to sda. How do I do that?
View 2 Replies
View Related
Aug 11, 2010
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
View 9 Replies
View Related
Aug 2, 2011
Hi,I had a Windows 7 installation and I decided to install ubuntu 11.04 I tried several times but every time soon or later something with grub goes wrong.Most times I get the error "no such partition",once it just halted after "verifying DMI ... " .I fixed windows mbr with "bootsect /nt60 C:" and then tried to reinstall grub with boot-repair .It showed no errors but after reboot I get "no such partition" again.
My scheme is something like :
/dev/sda1 -> the windows 7 system partition NTFS
/dev/sda2 -> partition for windows programs etc NTFS
/dev/sda3 -> partition for files(images/music/videos) NTFS
/dev/sda4 -> extended partition
[Code]...
View 3 Replies
View Related
Apr 12, 2011
Finally made the switch over to ubuntu, but I needed to keep my windows7 for several reasons. Let just start by saying I have two hard drives, a 200gig(which holds my windows7 partition) and a 500gig(has a 100gig partition which has ubuntu on it). After finally getting 10.04 to install on the 100gig partition and everything running right, I tried to load up windows7 and got an error.
Something along to lines of "the partition does not exist". I believe I messed up on the last step on the install, as I might of just been careless. I remember reading somewhere that if using multiple hard drives grub may get messed up in one way or another. IS there a way to fix this and make grub realize that window7 is on another partition, or am I out of luck?edit: Id like to add that grub is recognizing windows7, it just will not load off the other partition(I think)
View 4 Replies
View Related
Apr 13, 2010
I need to know whether Ubuntu can be hacked when it is installed as a dual boot with W7 by hacking windows and getting access to the Ubuntu partition?
What I would also like to know if this way can be used to put a key logger or screen capture in Ubuntu which installs next time Ubuntu is started?
View 9 Replies
View Related
Jul 6, 2011
my NIC drives me crazy and I need some help to gather all relevant informations to file a decent bug report. Maybe someone could guide me through this process.My mainboard is an AsRock Z68 Pro3
[URL]
I use a dual-boot setup with Windows7 installed in parallel to Fedora 15-x64. Whenever I had Windows in use and jjust reboot the system into Fedora, the NIC does not work as expected. Instead it goes in an endless "em1: link up" loop which results in very low bandwith or even complete network timeouts. This happens in Firefox as well as with yum or ping.
Quote:
Originally Posted by dmesg
[ 58.763294] r8169 0000:05:00.0: em1: link up
[ 59.686773] r8169 0000:05:00.0: em1: link up
[ 61.936454] r8169 0000:05:00.0: em1: link up
[code]....
If I directly cold boot into Fedora (after the power cord has been removed and the system got completely re-initialized) there are no problems at alll and I get a fast and stable network conection. This also happens with other linux distributions, for example SysRescCD.
View 1 Replies
View Related
Nov 10, 2010
I installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
View 1 Replies
View Related
Dec 31, 2009
I have a laptop that has multiple partitions and was running Windows 7. I installed Fedora in a area of free space in the extended area, thus in a logical partition. Fedora is now running on the laptop. But, at boot time, there is NO BOOT MANAGER. The laptop just boots straight away to Fedora.
I know this has probably been covered, but is there an "official" procedure or document available to us newbies that I can use to recover my system such that it boots all of my installed bootable partitions (including Windows7)?
View 2 Replies
View Related
Jul 28, 2011
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Jan 2, 2011
I have been running dual boot Windows XP and Slackware for years but I recently changed things up a bit a "broke" something.
Windows XP is on it's own 250GB HDD. I installed Windows 7 on a seperate 74GB HDD but it appears that it installed the bootloader over top of the Windows XP bootloader on the 250GB HDD. Both OS's booted fine and that point. Then I partitioned the 250GB HDD into 150GB and 100GB leaving me 100GB to install Ubuntu. I told Ubuntu to stick it's bootloader on the 250GB HDD thinking everything would work like magic although there appears to have been a little bit too much magic. Normally Slackware will allow you to manually edit your Lilo config file during installation and add all your OS's but this didn't happen with the Ubuntu install.
After the install there were 5 options in the bootloader menu (at this point I am not even sure what bootloader it was using). Ubuntu, Ubuntu ("safe mode?"), memtest, more memtest, and Windows 7 (bootloader? it wasn't just called windows 7 but something like Windows 7 bootloader, I have only booted once and I am writing this from Ubuntu right now). I tried selecting Windows 7 at that point hoping that it would bring me to the Windows bootloader which would allow me to select from Windows 7 and Windows XP but the screen just went blank for a second or two and then sent me back to the same screen I was just at.
So a quick Google of Ubuntu bootloader led me to believe I was using Grub and I needed to look for the /boot/grub/menu.lst file and edit that but the file wasn't there. Then I tried running grub but I was informed it wasn't even installed. I thought maybe I would have better luck with Lilo but that wasn't installed either. So I installed Lilo and ran liloconfig but I was told that fstab gave a UUID that led Lilo to belive I wasn't using an ordinary block device and I should go fix that and come back afterwards. In fact the only thing in fstab was the ext4 partition with Ubuntu and the swap partition even though I have 4 sata drives installed with 6 separate partitions.
At this point I am pretty lost. Most of my Linux work is done in Parallels now on a Macbook so I haven't had to mess with the bootloader in years and when I did it was all on Slackware which to me is set up quite a bit differently than Ubuntu. I would be pretty sick if I screwed up and took out 3 OS's with it.
How Grub will handle booting both Windows OS's when Windows appears to be doing it with one bootloader.
View 5 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Mar 23, 2010
In my computer I already installed Windows7 and Ubuntu.
when I start my computer then my computer want which OS I want to start with.
Now I'm want to install opensuse in my computer. But I want to know is it possible to run all 3 OS in my computer and when I start my computer it will ask that which OS now want to boot
1) Windows7
2) Opensuse
3) Ubuntu
I will enter my choice and If I enter choice 2 then I will work on "Opensuse" if I enter choice 3 then I will work on "Ubuntu" if I enter choice 1 then I will work on "Windows7"
View 9 Replies
View Related
Jan 25, 2011
I pretty much know nothing at all about partitioning hard-drives and unspeakably less about linux as a whole. but i really want to get into it. (The HP Mini 311 is what i am using)
Okay so a couple of days ago (before i had ever heard of Ubuntu, or even thought i could ever use Linux based software). I had been Dual-Booting OSX Snow Leopard and Windows 7, while using Chameleon boot-loader, on my HP Mini 311. Even though my sound-card and network adapter do not work while running Snow Leopard.
I followed this guide for dualboot: [url]
So i heard about the new Linux Os Ubuntu, and after trying it for about 3min on a USB i was sold. So i began to make my HP a triple-boot now with OSX Snow Leo, Windows 7, and Ubuntu.
I did this by recreating the same dual-boot system as before, but this time saving room for Ubuntu to be installed to my hard drive, after SnowLeo and Win7.
I got this to work perfectly by creating a 4th partition for Ubuntu and a 5th for swap area.
Here is where my problem lies... I saw this tutorial for dual-booting Win7 and Ubuntu, while making another partition so that windows and ubuntu can share the same files.
Here:[url]
Once i tried doing this on my triple-boot(adding ubuntu partition, swap partition, and a "storage" partition, on top of the 3 partitions i created during dual-boot setup) My Windows 7 stopped booting. I read somewhere that hdds can only have like 3 primary partitions, which is the only kind of partition i know how to use. so i was thinking maybe i could put this storage partition in another mount location, such as /home or /usr, because i think the added partitions is what messed up my Windows 7 boot. My only problem is i have no idea what different mount positions are used for, nor how to use them properly.
View 7 Replies
View Related
Jan 18, 2010
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
Feb 10, 2010
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
View 2 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Oct 18, 2010
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
View 9 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Jun 5, 2010
I am ready to reclaim the disk space that is currently being used by XP in my dualboot scenario. Per the Gparted scan below, my hard drive is currently being sequenced as sda1 (NTFS data only, which I mounted in Ubuntu and write my working documents to), sda2 (XP operating system/boot drive). Ubuntu is on sda3, with home on sda4. I'm currently running 9.10.
I would like to eliminate the contents of sda2, and migrate sda1 contents to ext4. Question is, what are the best steps. I have good backups of everything, and sync my NTFS data to a NAS.
My grub.cfg looks as follows (am running 1.97)
Code:
View 5 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies
View Related
