Ubuntu Installation :: Dual Boot: Windows7 Will Not Load?
Jun 11, 2011
I have a laptop that has a dual boot of Windows7/Ubuntu10.04. Ubuntu loads fine, but Windows 7 does not. It shows up in the Grub, but it will not load. I assume that the boot loader was messed up somehow, but I am not experienced at deciphering the boot info file. I was hoping someone might be able to take a look at the file and tell me what the issue might be, and also which part of the text indicates the problemBoot File:
Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
[code]...
View 3 Replies
ADVERTISEMENT
Apr 12, 2011
Finally made the switch over to ubuntu, but I needed to keep my windows7 for several reasons. Let just start by saying I have two hard drives, a 200gig(which holds my windows7 partition) and a 500gig(has a 100gig partition which has ubuntu on it). After finally getting 10.04 to install on the 100gig partition and everything running right, I tried to load up windows7 and got an error.
Something along to lines of "the partition does not exist". I believe I messed up on the last step on the install, as I might of just been careless. I remember reading somewhere that if using multiple hard drives grub may get messed up in one way or another. IS there a way to fix this and make grub realize that window7 is on another partition, or am I out of luck?edit: Id like to add that grub is recognizing windows7, it just will not load off the other partition(I think)
View 4 Replies
View Related
Jun 22, 2011
I built this computer with a Gigabyte motherboard, i3 processor, 8Gb ram, 64Gb SSD, and 1.5Tb HDD. Loaded Windows 7 to the SSD... repartitioned the drives and loaded Ubuntu 11.04.The start menu comes up to select Windows 7 or Ubuntu... when I select Ubuntu I get a screen which reads:Windows failed to start. A recent hardware or software change might be the cause. To Fix the problem:1. Insert your windows installation disc and restart your computer.2. Choose your language settings, and the click "Next"3. Click "Repair your computer."if you do not have this disc, contact your sys admin or manufacturer for assistance. File: ubuntuwinbootwubildr.mbrStatus: 0xc0000098Info: The selected entry could not be loaded because the application is missing or corrupt.
This screen continues to come up. I tried to load Ubuntu with Wubi but it would not install... I have now installed it from a DVD but the load screen keeps putting me back to the screen above. I can't load from the Windows CD it won't recognize it even if I change the bios setting.Windows 7 seems to be running fine... and Ubuntu seems to have loaded fine... so how can I get my Windows boot screen to go and load Ubuntu as my OS?
View 9 Replies
View Related
May 14, 2011
I have done some commands in ubuntu 11.04 and got problems, thinking of reinstall it. (laptop acer 5738zg)
Previously when i have dual booted win7 and ubuntu10 and linux mint i always get "grub rescue" when i try reinstall my linux partition, and it ends with i have to do clean reinstall of both windows and linux, which is a major pain in the rectum area
Is there a way to make my linux go back to original state without reinstall, and if i reinstall, how can I do this without loosing win7 partition and get this awful grub rescue message.
View 1 Replies
View Related
Dec 6, 2010
Windows 7 is first boot disk. Installed Fedora 13 on second disk from DVD. During installation it did not ask if I wanted dual boot. Fedora installed fine on second disk. Rebooted and only Windows will lood. How to setup to dual boot? Can I modify Windows Boot file? or do I have to install Grub on to sda. How do I do that?
View 2 Replies
View Related
Aug 11, 2010
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
View 9 Replies
View Related
Aug 2, 2011
Hi,I had a Windows 7 installation and I decided to install ubuntu 11.04 I tried several times but every time soon or later something with grub goes wrong.Most times I get the error "no such partition",once it just halted after "verifying DMI ... " .I fixed windows mbr with "bootsect /nt60 C:" and then tried to reinstall grub with boot-repair .It showed no errors but after reboot I get "no such partition" again.
My scheme is something like :
/dev/sda1 -> the windows 7 system partition NTFS
/dev/sda2 -> partition for windows programs etc NTFS
/dev/sda3 -> partition for files(images/music/videos) NTFS
/dev/sda4 -> extended partition
[Code]...
View 3 Replies
View Related
Apr 13, 2010
I need to know whether Ubuntu can be hacked when it is installed as a dual boot with W7 by hacking windows and getting access to the Ubuntu partition?
What I would also like to know if this way can be used to put a key logger or screen capture in Ubuntu which installs next time Ubuntu is started?
View 9 Replies
View Related
Jul 6, 2011
my NIC drives me crazy and I need some help to gather all relevant informations to file a decent bug report. Maybe someone could guide me through this process.My mainboard is an AsRock Z68 Pro3
[URL]
I use a dual-boot setup with Windows7 installed in parallel to Fedora 15-x64. Whenever I had Windows in use and jjust reboot the system into Fedora, the NIC does not work as expected. Instead it goes in an endless "em1: link up" loop which results in very low bandwith or even complete network timeouts. This happens in Firefox as well as with yum or ping.
Quote:
Originally Posted by dmesg
[ 58.763294] r8169 0000:05:00.0: em1: link up
[ 59.686773] r8169 0000:05:00.0: em1: link up
[ 61.936454] r8169 0000:05:00.0: em1: link up
[code]....
If I directly cold boot into Fedora (after the power cord has been removed and the system got completely re-initialized) there are no problems at alll and I get a fast and stable network conection. This also happens with other linux distributions, for example SysRescCD.
View 1 Replies
View Related
Jan 18, 2010
I managed somehow to successfully install a dual boot with Ubuntu 9.02 and Windows XP. Ubuntu was on a PATA drive and the WinXP was on a SATA drive. The SATA drive was configured to boot first. As I was having problems with Ubuntu I booted into WinXP, re-formatted the PATA drive, then restarted the computer and installed Ubuntu 9.10. It all went well.I rebooted the machine and the following message was on the screen:
GRUB Loading stage1.5.GRUB Loading, please wait....Error 17
I rebooted, changed the boot order so that the PATA disk (Ubuntu) started first, then the SATA(WinXP). Ubuntu loaded up the dual boot screen.I chose WINXP, but I was greeted with a black screen.I rebooted again and chose to load Ubuntu, which it did without a hitch.what I should do to restore my access to WinXP? Or should I start again? If so, how?
View 9 Replies
View Related
Jul 19, 2010
I installed ubuntu 10.04, aftert that i cluld not able to start windows xp,Please find the details about my hard disk
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 2 Replies
View Related
Mar 19, 2010
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
View 5 Replies
View Related
Apr 24, 2010
I am unable to load Ubuntu onto computer as dual boot or inside windows. Thus scanned the CD and found it has 23 errors.Are these files suppose to be on the CD?casper, .disk, install, install, isolinux, pics, pool, pressed, autorun, md5sum.
View 4 Replies
View Related
Oct 1, 2010
I have two hard disks sda and sdb. I have Windows XP installed on sda2 and Ubuntu 10.04 on sdb5. When I installed Windows XP, Ubuntu stopped booting. I tried to repair grub2 from a Live CD unsuccessfully. Now I have completely messed up my MBR of both HDDs. I just want to configure grub2 to load both OSes in dual boot mode.
View 9 Replies
View Related
Nov 10, 2010
I installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
View 1 Replies
View Related
Dec 31, 2009
I have a laptop that has multiple partitions and was running Windows 7. I installed Fedora in a area of free space in the extended area, thus in a logical partition. Fedora is now running on the laptop. But, at boot time, there is NO BOOT MANAGER. The laptop just boots straight away to Fedora.
I know this has probably been covered, but is there an "official" procedure or document available to us newbies that I can use to recover my system such that it boots all of my installed bootable partitions (including Windows7)?
View 2 Replies
View Related
Jul 28, 2011
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies
View Related
Feb 10, 2011
On reboot the GRUB2 installer shows me the options for OS - I select Windows XP and then I get a blank screen with a flashing cursor - and nothing.. I CTRL ALT DEL and it reboots back to GRUB2 and I select UBUNTU and I log in. This is the first time I have tried to reboot Windows XP after fresh install of UBUNTU
[Code]....
View 9 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
May 2, 2010
I have upgraded to ubuntu 10.04 but now can't boot into win vista, ubuntu and vista are on grub but vista will not load, I have tried sudo upgrade-grub which seemed to work but had no effect on loading windows. I did think of using win dvd to fixmbr but only as last resort, I entered the commands suggested by nitstorm and got "command not found". Followed link to source forge.net and test disk, followed the instructions to install and run test disk which repaired the boot sector in the vista partition, I can now choose to boot into win or ubuntu.
View 6 Replies
View Related
May 20, 2010
I had karmic koala installed a few months back, but wasn't using it cause i didn't have time to properly configure it. Last night, i was thinking of probing around with it a little and found an update for it and went ahead and installed it. After rebooting, GRUB refused to load any of the OSes, but i was still able to access ubuntu with a reduced graphics option (safe mode?). Tried reinstalling etc etc but nothing worked. In my frustration, i whipped out my windows CD and deleted the partition for ubuntu.
Now, after the loading of bios, i get "error: no such partition. grub rescue>".Is there anyway i can get delete grub and get my vista to boot normally? or would i need to reformat everything again? maybe someone can point me in the right direction if a similar thread had been posted before.
View 2 Replies
View Related
Mar 20, 2011
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
View 9 Replies
View Related
May 17, 2011
Just installed Slackware 13.37 and am trying to get dual boot to work properly. I have edited /etc/lilo.conf to point the Windows section to what I believe should be the correct partition (/dev/sda2) Here is the relevant section
Code:
# LILO configuration file
# Windows bootable partition config begins
other = /dev/sda2
[code]....
I have mounted /dev/sda2 to /ntfs-c as suggested during install and when I browse through there I see the files from my windows setup so it is in fact the correct partition. When I load Windows on boot, however, it is pointing to the recovery partition (/dev/sda1).
View 1 Replies
View Related
Apr 28, 2011
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
View 8 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Jun 30, 2011
I have an older pc now dedicated to ubuntu and run 11.04 32-bit no problem, and previous versions as well. I just got new hardware and assembled it and wanted to make it dual boot with win7. Found the information and got it working so I thought. Everything was peaches and cream until the install finished. A long long message appeared with read errors from some drive (i think it was my swap partition but its just a guess), appearing and disappearing to fast to read, so it don't know what it was trying to tell me aside from "read error". After the the message it said remove media and restart now. Which I did, booted to windows, modified the BSD to boot to Ubuntu or windows, Get the grub2 loader and select ubuntu. This is when everything goes awry, I dont get any loading screen just a singular purple screen, if I press any key, it starts to flash, and every subsequent key I press cause it to flash faster.
I can run the livecd (64-bit 11.04) no problems, As well as win7-64 (currently to post this message). But i cant get Ubuntu to load. I deleted and reformatted the partitions I'm using and reinstalled with the same problem.(/boot,swap,/(root) and /home) under windows management they are listed as healthy(ext4 -- except for swap,primary -- except for swap as logical and all set to beginning). So I guess the question is what could be cause this problem? My settings for install, my bios, or something else? My system specs are Asus mobo, amd phenom2 hexcore, 4gigs ram, 2 ati radeon crossfired, a 2 tb hd and a 40 gig ssd.
View 1 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Jan 2, 2011
I have been running dual boot Windows XP and Slackware for years but I recently changed things up a bit a "broke" something.
Windows XP is on it's own 250GB HDD. I installed Windows 7 on a seperate 74GB HDD but it appears that it installed the bootloader over top of the Windows XP bootloader on the 250GB HDD. Both OS's booted fine and that point. Then I partitioned the 250GB HDD into 150GB and 100GB leaving me 100GB to install Ubuntu. I told Ubuntu to stick it's bootloader on the 250GB HDD thinking everything would work like magic although there appears to have been a little bit too much magic. Normally Slackware will allow you to manually edit your Lilo config file during installation and add all your OS's but this didn't happen with the Ubuntu install.
After the install there were 5 options in the bootloader menu (at this point I am not even sure what bootloader it was using). Ubuntu, Ubuntu ("safe mode?"), memtest, more memtest, and Windows 7 (bootloader? it wasn't just called windows 7 but something like Windows 7 bootloader, I have only booted once and I am writing this from Ubuntu right now). I tried selecting Windows 7 at that point hoping that it would bring me to the Windows bootloader which would allow me to select from Windows 7 and Windows XP but the screen just went blank for a second or two and then sent me back to the same screen I was just at.
So a quick Google of Ubuntu bootloader led me to believe I was using Grub and I needed to look for the /boot/grub/menu.lst file and edit that but the file wasn't there. Then I tried running grub but I was informed it wasn't even installed. I thought maybe I would have better luck with Lilo but that wasn't installed either. So I installed Lilo and ran liloconfig but I was told that fstab gave a UUID that led Lilo to belive I wasn't using an ordinary block device and I should go fix that and come back afterwards. In fact the only thing in fstab was the ext4 partition with Ubuntu and the swap partition even though I have 4 sata drives installed with 6 separate partitions.
At this point I am pretty lost. Most of my Linux work is done in Parallels now on a Macbook so I haven't had to mess with the bootloader in years and when I did it was all on Slackware which to me is set up quite a bit differently than Ubuntu. I would be pretty sick if I screwed up and took out 3 OS's with it.
How Grub will handle booting both Windows OS's when Windows appears to be doing it with one bootloader.
View 5 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
