I have been using SDB:NVIDIA_the_hard_way and have run into a problem. When I run the script, it gives me the following error message: You appear to be running an X server; please exit X before installing
View 7 Replies
I hope this is an easy question to answer, how do update my nVidia drivers? Can I add a repository so it automatically updates? I have downloaded the latest verson from the nvidia website. When I so a "sudo ./NVIDIA-Linux-x86_64-190.53-pkg2.run" I get "Error: You appear to be running an X server; please exit X before installing"
View 1 Replies View RelatedThe first thing I do is press ctrl-alt-f1. Then I do this:
Code: sudo su
init 3
./NVIDIA-linux-x86-260.19.12.run Then it comes up with the error that I have X-server running.
I've also tried Code: /etc/init.d/gdm stop but that command wasn't recognised. I've also tried Code: killall -9 X but there are no processes called X
I'm trying to install the latest NVIDIA drivers (not the ones provided by the 'Additional drivers' application). In order to install them, I need to exit the X-server and terminate all OpenGL processes. How do I do that? I've seen many things like 'press ctrl-alt-backspace' and typing 'sudo /etc/init.d/gdm stop' but none of them work. I'm using Kubuntu 10.10 and gdm doesn't even exist.
View 4 Replies View RelatedI'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedAfter starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies View RelatedI managed to install the graphics card's driver on several distributions, but I just don't get what I have to do to run it on Fedora.Well.... The installation program asks me that X must be stopped... but.. how do I do that?Ctrl + Alt + Backspace doesn't work.When typing "top", X or gdm are not in the list.
View 12 Replies View RelatedIt's been quite a run-around trying to get the Nvidia driver working.I have already followed a lot of instructions, at least onceI still get caught at "the pre-install script failed". When I looked at the script itself, it says it's "triggering an error status to prevent the installer from overwriting ubuntu's nvdia packages."Some say this script can be ignored, but it seems to be the only thing keeping my install from working.Some say install from root prompt, some say GUI OK. Some say d/l from NVIDIA, some from repository. I have been doing root, init 3, removing old drivers, etc..
View 9 Replies View RelatedI am preparing everything that I will be using in my fourth year project which is based on the grid computing concept. My problem is that before I installed ubuntu 10.10, I was using 9.10. And in my previous version (9.10) I was able to install condor through the synaptic package manager comfortably,but after upgrading to version 10.10 am getting the following error after installing condor:
"E:condor:subprocess installed post-installation script returned error exit status 127"
I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.
HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m
I'm having some (well, a lot actually) of problems trying to get OpenSUSE 11.2 installed on my home PC. I am attempting to set up a dual boot configuration with Windows 7 installed on an bios Nvidia RAID 0.I was able to shrink the partition in Windows, and rebooted onto the net install for OpenSUSE (the MD5 validated DVD install failed multiple burns with "Repository not found"). I get into the graphical installer portion with no problems off the net install CD. However, the installer is not recognizing that there is an existing RAID 0. It lists the 2 SATA disks in the RAID separately. I can click on SDA1, and both SDB and SDB1 and it shows the disks, but does not recognize any existing partitions. If I click on SDA I get an immediate segfault in YaST and drop back to the text mode installer menu. It is loading the nv_sata module just fine.
From forum searches and google it seems that this is not usually a problem. My motherboard is a Gigabyte GA-M57SLI-S4 with the Nvidia Nforce 570 chipset running an AMD X2 64 3800+. Removing the stripeset and redoing it as Linux software RAID is not an option, I do not have enough space for a total backup/restore. Anything I do has to be nondestructive to the existing Windows installation.I really want to have a linux installation but between the DVD installer failing and now this issue I am about ready to give up on it.
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies View RelatedI am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:
[Code]...
...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies View RelatedI installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies View Relatedopensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies View RelatedAfter a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
I am trying to install suse 11 on an ibm x3400 m2 machine. After installing the various packages, i get the following error :
Error while installing initrd
Error while installing grub
There are 2 500GB hard disks on which i have configured RAID-1.let me know what the issue could be as I am new to linux.
This is my first linux install ever, so I have no idea what is going on. I hope I have enough information to get this figured out as soon as possible. I was bored with windows 7 and wanted to learn another operating system. I made a boot cd with openSuSE gnome. On the internal hard drive is my windows 7 boot system that i do not want to touch, and on the external 1tb hard drive, i'd like to partition 50 GB for openSuSE. If this is not possible i have another method, but i'd rather not use it (which is use my secondary 80 GiB hdd). When installing, I am getting the error, "Error occured while installing GRUB" Which shows the following:
[Code]...
Before installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
[Code]...
I am trying to install OpenSUSE 11.3 on a Dell T3500 Desktop machine. The configuration (related to the problem) of the machine is as follows:
Intel Xeon CPU W3520, 4GB RAM
Intel 82801 SATA RAID Controller
Samsung HD161GJ 160 GB SATA,
Optiarc DVD+-RW AD-7230S
When I try to boot from the OpenSUSE 11.3 x86_64 DVD, I get a curses based screen which says, "Make sure that CD number 1 is in your drive." (with OK and Back buttons). On pressing Back and trying to install again, I get an angry red dialog, which declares, "No repository found."
I tried connecting an external USB DVD drive and then booting from it, then this problem did not come and the install went to start the GUI. But then it could not find the (rather any) hard disk!
We have a set of these identical machines and the problem is fully repeatable on all of them (I tried downloading and burning the DVD image again, that didn't help). The same machines have OpenSUSE 11.1 and 11.2 installed on them and there was no such problem installing those.
I got this error when installing 11.3 64 with the home partition encrypted.
"Failure occurred during the following action: Setting up encrypted dm device on /dev/sda7 System error code was: -3033"
Can I encrypt /home after the install? Should I?
What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
I am trying to install gcc4.1.1 upon my opensuse machine which already has gcc 4.5 installed but I want an earlier version.
1) I downloaded gcc-4.1.1.tar.bz2
2) Extracted the contents
3) When I tried to run the command "./configure" on terminal its giving error "configure: error: can not find sources in . or ..". However I can see the configure file in the directory. Below are the files present in directory.
[Code]....
I played the apprentice sorcerer trying to install mysql workbench by my own and I messed up the system 11.1 by removing accidentally some libraries and decided to jump on 11.4 by using the update feature from the DVD. It worked all good (it seems at least: I didn't lost any datas and all my servers are running ok) but there is no more X11 server (kde) running for the run level 5.
I checked the inittab file and it is set to 5. I can log on root account and now I'm searching how to install kde on this new 11.4 system. I didn't yet tried the failsafe option at boot. Is there a way to set up kde from the internet, my wifi connection is ok ? I saw that yast was not installed nore zypper nore yum. Do I first try another update to fix it (if possible) from DVD?
I am trying to install openSUSE 11.4 as a virtual machine running on VMWare Server V1.0. VMWare Server is running under WinXP 32bit.
I configured the VM with the following settings:
10GB disk
512 MB Ram
The installation starts from the DVD after inserting the disk. OpenSUSE setup appears, i do not touch the default resolution 800x600. Every thing is looking good. After setting the language, the installation process continues. Then a problem with the screen/resolution/graphical adapter appears. After a while I cannot read anything from the setup screen, everything is unreadable. I remember I had those problems already with 11.3 but I did not follow this issue an took openSUSE 11.1 instead. With 11.1 I could follow the installation instruction till the end and I got a running system.
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
So I've searched across these forums and haven't quite found the same problem I'm having. For the record, I'm running Ubuntu 9.10 So I built my new box, and my video card is a Gigabyte Nvidia GeForce 9600GT (GIGABYTE GV-N96TZL-1GI). I go to System > Administration > Hardware Drivers to install the drivers so I can use those fancy 3D effects. It tells me I need to restart, so I do.
When it comes up though, I get an error message about running in low graphics mode, the top 5th of my screen is blacked out, and the screen has been shifted so that the left boundary is in the middle, and the right boundary goes off the screen and back to the left side. It goes back to working fine (but without the fancy 3D effects) when I remove the drivers. Both drivers in the hardware drivers (185 and 173) have this problem. I'd post log files and such, but I'm at work right now.
I wonder if this is the right sub-forum I quite often play around with beta releases. Sometime the Screen freezes. (so what) However is there a key-stroke ctrl-?-? to get to a login prompt ????(rather then press the reboot button) ???
View 3 Replies View Related
