OpenSUSE Install :: Installing NVidia Driver For Geforce GTX 275 Fails
Aug 20, 2009
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies
ADVERTISEMENT
Jan 11, 2011
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
View 9 Replies
View Related
Mar 15, 2011
installing nvidia driver . i'm useing gnome desk top.
View 9 Replies
View Related
Jun 22, 2010
find a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.
View 4 Replies
View Related
Oct 25, 2010
install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.
View 10 Replies
View Related
Feb 11, 2010
I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
[code]....
View 4 Replies
View Related
Jan 15, 2011
I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.
Error log*********************************************** ********************
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Jan 15 12:52:09 2011
[code]....
I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?
View 5 Replies
View Related
May 2, 2011
I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute
Code:
/etc/bin/nvidia-xconfig
The article SDB:NVIDIA the hard way results in the following error (copied from the error log):
Code:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.
Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.
View 9 Replies
View Related
Jan 8, 2011
I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.
HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m
View 1 Replies
View Related
Oct 13, 2010
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
Jul 21, 2010
I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies
View Related
Mar 31, 2010
I have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)
View 3 Replies
View Related
Nov 29, 2009
On openSUSE 11.1 I was able to configure KDE 4 for 2 monitors with sax2 (although the resolution was bad).On 11.2 neither SAX2 nor KRandR seem to work. The KDE User Guide says that a driver supporting version 1.2 is necessary. However the nvidia driver for eForce FX Go5200 seems to support only version 1.1.Is there a way to use both monitors with SUSE 11.2? I am quite desperate since for my work using only 1 monitor is definitely a handicap.
View 5 Replies
View Related
Jan 22, 2010
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies
View Related
Jan 28, 2010
When i start the install of the open suse linux 11.2 load the kernel but later my display is in black, i think that is my graphic card becouse in other linux only load linux without graphic mode, what i have to do for install open suse?, i can download a driver with the installer or something like?
View 4 Replies
View Related
Nov 27, 2010
My current system (Dell Optiplex 260, 2.8 GHz CPU, 1.5 Gig RAM, Nvidia Geforce 5200 AGP, HannsG HX190 through DFP) was running Kubuntu 9 perfectly, but was lost due to a disk crash and a flawed backup. Rather than trying to fix a badly damaged system, I decided to go straight to 10. Installation went smoothly until I tried to activate tvout, which again worked perfectly under K9. Now, xserver goes into a start crash/loop and the system must be shut down using the power switch. While looping, the TV does seem to briefly go into graphics mode, but the monitor stays dark. The only way to get the system running again is to comment out the 'Screen 1' clause of the 'Section Serverlayout' in the xorg.conf. I even tried restoring the xorg.conf that ran fine under K9, same problem.
Here's the xorg.conf that the Nvidia Server Setting app generates:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
[code]....
View 2 Replies
View Related
Feb 8, 2011
Many people are having trouble with the latest nvidia drivers. I think there might be a pattern and that might lead to a solution; even if that solution is "give up with that card you're using." So, here's the first:
7600GS PCI with 32 bit opensuse 11.3 and KDE 4.6
View 9 Replies
View Related
Aug 9, 2011
i wanna learn so much of it as much as I do in Windows System. I have downloaded the video driver but when I installed it in Terminal some error occured after i press the enter key..
You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL].. is someone know how to solve this issue?
View 2 Replies
View Related
Mar 11, 2011
anyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.
View 5 Replies
View Related
May 8, 2011
My 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?
View 1 Replies
View Related
May 28, 2011
I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:
$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found
I was not able to install the package.
$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig
[code].......
View 9 Replies
View Related
Sep 29, 2010
In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.
Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.
View 4 Replies
View Related
Oct 6, 2010
the installation of the driver of the nvidia geforce GTS 250 fails. is it due to CENTOS or Nvidia driver?
#note1
CentOS version: 5.5
#note 2:
in the following "uname -a" output:
Linux localhost.localdomain 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux
#note 3:
in the following "/var/log/nvidia-installer.log" content:
[Code]...
View 3 Replies
View Related
Apr 3, 2011
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
View 1 Replies
View Related
Oct 9, 2010
I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.
I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.
Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.
Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...
Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...
I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!
It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...
Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.
View 2 Replies
View Related
May 24, 2010
I just installed a fresh copy of unbuntu 10.04 and downloaded the lastest drivers for my video card but when double click the file, i get a message that says "could not open file/home/desktop name/download/n...nux-86-96.43.16-pkg1.run."Anyone know why this is happening? A friend told me to try to run them in terminal so when i opened the drivers with terminal I get a message saying "error: nvida-installer must be run as root"
View 9 Replies
View Related
Sep 23, 2010
I have installed SUSE 11.3 and I am using KDE4. I also installed the font "misc-console".
After installing the NVIDIA driver 256.53 the font misc-console becomes useless because it is displayed so much slanted that it is imposible to read. However, if I disable the NVIDIA driver (by replacing "nvidia" with "nv" in xorg.conf), then it works fine. It also works fine in KDE3 and the NVIDIA driver. So, it seems to be a combination between NVIDIA and KDE4. A lot other fonts are also overly slanted and unreadable (like "Sony fixed", "misc fixed", etc.).
If I launch konsole from a terminal, I receive the following warning:
konsole(6928) Konsole::TerminalDisplay::setVTFont: Using an unsupported variable-width font in the terminal. This may produce display errors.
Is there a way that I can use "misc-console" without having to uninstall the NVIDIA driver? I'm just used to this font for my terminal.
The same happens whether I install the driver manually or through YAST, 32 or 64 bit. The video card is NVIDIA 8400GS, the system Athlon 64 4400+
View 6 Replies
View Related
Apr 15, 2010
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies
View Related
Nov 2, 2010
After installing the driver of nvidia GEForce 9800 GT on RHEL5.5 the monitor goes out of range ?? What to do ?
View 5 Replies
View Related
