OpenSUSE Install :: Error Re-installing Windows On Existing Partition
Feb 7, 2011
What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
View 4 Replies
ADVERTISEMENT
Jan 30, 2011
I got this error when installing 11.3 64 with the home partition encrypted.
"Failure occurred during the following action: Setting up encrypted dm device on /dev/sda7 System error code was: -3033"
Can I encrypt /home after the install? Should I?
View 1 Replies
View Related
Apr 8, 2010
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
View 6 Replies
View Related
Apr 6, 2010
I'm having some (well, a lot actually) of problems trying to get OpenSUSE 11.2 installed on my home PC. I am attempting to set up a dual boot configuration with Windows 7 installed on an bios Nvidia RAID 0.I was able to shrink the partition in Windows, and rebooted onto the net install for OpenSUSE (the MD5 validated DVD install failed multiple burns with "Repository not found"). I get into the graphical installer portion with no problems off the net install CD. However, the installer is not recognizing that there is an existing RAID 0. It lists the 2 SATA disks in the RAID separately. I can click on SDA1, and both SDB and SDB1 and it shows the disks, but does not recognize any existing partitions. If I click on SDA I get an immediate segfault in YaST and drop back to the text mode installer menu. It is loading the nv_sata module just fine.
From forum searches and google it seems that this is not usually a problem. My motherboard is a Gigabyte GA-M57SLI-S4 with the Nvidia Nforce 570 chipset running an AMD X2 64 3800+. Removing the stripeset and redoing it as Linux software RAID is not an option, I do not have enough space for a total backup/restore. Anything I do has to be nondestructive to the existing Windows installation.I really want to have a linux installation but between the DVD installer failing and now this issue I am about ready to give up on it.
View 9 Replies
View Related
Sep 10, 2009
Getting back my OpenSuse OS/partition.
Background: I had a dual boot system, Win XP followed by OpenSuse 11.1 install. I tweaked it a lot to get my wireless card and Nividia card working. Finally got it to a stage where it was working great.
What happened: For some reasons windows XP had some issues and I had to reinstall the OS. Since I have the openSuse install DVD lying around I took the bold step of reinstalling windows knowing that it will blow away the Grub from MBR. However, during the windows setup, the setup said something about setting the Linux partition as inactive (I think so). Unfortunately, I don't remember the exact message.
After finishing the XP install, I booted in with the XP Cd and tried the repair option to repair the MBR. That really messed up the MBR. So much so that booting back with XP boot CD and running fixmbr didn't work. Finally reinstalled windows again.
Now I am not sure what should I do next.
I tried using the superGrubDisk but it gives the following error: Error 15 File not found.
View 7 Replies
View Related
Jan 14, 2010
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies
View Related
Apr 26, 2011
I sudo apt-get uninstalled a bunch of stuff I shouldn't have. Now my Ubuntu Partition doesn't boot up correctly, something about the graphic system, video system, etc. all being unconfigured. (I'll get the exact error later.) All I can use is the command line.can I install Ubuntu over my old Ubuntu partition without messing up rebooting/GRUB and all that?
View 3 Replies
View Related
Jun 10, 2010
What I am trying to accomplish, is have 3 partitions on my hard drive. The first one being Windows 35GB. The second being 15GB Ubuntu. The remaining just being backups. I have set up partitions for this, but I have failed thus far in finding a way to install to the Ubuntu partition I have created. Should I have left that space unallocated? How would I make this work?
View 1 Replies
View Related
Jan 7, 2011
My Laptop is Dell Inspiron 1525 with Dual boot Windows vista as well as Linux mint. I was trying to install Ubuntu over Linux Mint, but it is not detecting the existing partitions asking me to go ahead and edit the partitions manually (which I am not familiar with). Earlier when I was installing Linux Mint or SUSE, it was detecting the existing partitions and could install easily. Currently I am sure how to go about, but I would like to install Ubuntu badly.
View 1 Replies
View Related
Dec 19, 2010
I administer a small network of computers connected to a windows 2003 server. The machines Dual boot Windows XP and CentOS 5.
My question is this. The machines are being upgraded to HP Z800 workstations. These workstations come with 2 1TB drives setup on a hardware RAID0. Can I install Linux on these machines, using the RAID0? Can I do an install as if it was just one hard drive? The machines came with Windows7 and I'd like to keep it intact including the RAID0. Can I do the install where it resizes the partition, adding the linux partition to the "drive".
If I can't use the existing windows RAID0 to install CentOS I was thinking of just installing another hard drive in the machines for it. This brings up another question, what would happen if I moved my Linux drive from one of the old workstations and put it in the new workstation, would it boot? I know windows wont boot like this because of the hdd controller drivers and I have a sneaky work around for this anyway but am not wanting to transfer the windows installation.
View 5 Replies
View Related
Dec 20, 2010
I administer a small network of computers connected to a windows 2003 server. The machines Dual boot Windows XP and CentOS 5. My question is this. The machines are being upgraded to HP Z800 workstations. These workstations come with 2 1TB drives setup on a hardware RAID0. Can I install Linux on these machines, using the RAID0? Can I do an install as if it was just one hard drive? The machines came with Windows7 and I'd like to keep it intact including the RAID0. Can I do the install where it resizes the partition, adding the linux partition to the "drive".
If I can't use the existing windows RAID0 to install CentOS I was thinking of just installing another hard drive in the machines for it. This brings up another question, what would happen if I moved my Linux drive from one of the old workstations and put it in the new workstation, would it boot? I know windows wont boot like this because of the hdd controller drivers and I have a sneaky work around for this anyway but am not wanting to transfer the windows installation.
View 2 Replies
View Related
May 20, 2010
I'm having a installation problem. I am trying to install Ubuntu on my laptop that is currently running Windows 7, and win7 is needed for use in projecting songs in our church services. The HD is a 500 gb already partitioned with the max. of 4 partitions. Win7 files are on the sda2 partition and my data files are on sda3. Sda1 and sda4 are smaller partitions, one is 3 gb's the other is 1 gb.
My question is, what is the best set up for me to install Ubuntu? I can't create an extended partition since I already have 4 partitions. I like my current partition set up as far as windows goes, but I would really like to get Ubuntu installed. I'm fairly new with Ubuntu, I like what I've seen so far. I had it installed with wubi in windows XP on a laptop that I just sold, and I've upgraded to the windows 7 laptop now, and I'm stuck!
View 9 Replies
View Related
May 20, 2010
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
View 2 Replies
View Related
Sep 9, 2010
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
View 2 Replies
View Related
Feb 11, 2010
This is the 1st time I am installing SUSE and I wanted to clear some of my doubts:I have the following computer specs:Core i32 GB RAM320 GB HDDATI Mobility Radeon 43301. Is creating a swap partition necessary while installing Suse 11.2?2. Will I be able to install 64-bit version of Suse on my computer?3. Will I be able to run Windows 7 side by side?4. Will I have any compatibility issues with my Display Adapter since I have had problems previously on Ubuntu with my onboard ATi Graphics..
View 9 Replies
View Related
Sep 13, 2010
Just did a clean install of 11.3. After first try, system couldn't boot for hard drive. When installing a second time, I noticed that booting from a boot partition and the MBR are disabled by default. I enabled both and proceeded with the install. System now boots fine. Since the automatic partitioning created a boot partition, I'm assuming that that is where the system is booting from and I didn't need to enable booting from MBR, but am not 100% sure. So make sure to at least enable booting from a boot partition
View 3 Replies
View Related
Aug 29, 2010
I want to install Fedora KDE spin on an existing XFS partition without formatting it. (Since said partition is full of my data that I have nowhere else to put). But the installer doesn't allow me to set the partition as / without formatting. XFS is not one of the filesystems listed as options for formatting. How can I make Fedora do what I want?
View 7 Replies
View Related
Jan 5, 2010
The openSUSE 11.2 installation disk doesn't want to let me resize my NTFS-based WinXP partition; it just says that the fs is inconsistent and that I should check this issue in windows... But even though I've scheduled diskcheck to run after a reboot, it doesn't! Is there some way of "forcing" the diskcheck to run upon startup, or how else can I resolve this issue (without re-installing my entire system)?
View 9 Replies
View Related
Aug 4, 2010
After having successfully downloaded and burned 11.3 ISO to DVD, i'm off to doing dangerous things: trying to install this on my work laptop which has Win XP SP3. when the partitioning stuff comes up, it suggests deleting the windows partition.
i have tried various options in terms of editing/resizing existing partitions and have always gotten errors. Just want to confirm: if I delete the windows partition, i'll lose my Win XP and all the data i have. Is that right?
View 9 Replies
View Related
Oct 18, 2010
i've just installed the 11.3 while still keeping win 7. but i can't open the windows partition ,and even the massive usb storage device. i notice that by changing some syntax in the etc/fstba, i can make the system read the windows partition automatically once i start my PC. but how?
[Code]...
View 6 Replies
View Related
Nov 14, 2010
I have been an Ubuntu user for years and am new top OpenSuse 11.3. In Ubuntu I was used to be able to mount and have read/write acces to my Windows partition. My question is: Is this possible in OpenSuse?
View 9 Replies
View Related
Jul 22, 2010
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
View 6 Replies
View Related
Nov 27, 2009
my desktop has two hdd(sda+sdb recognized as (hd1)and (hd0)respectively..)sda has vista on it. sda is comprised of several simple volumes which vista calls dynamic ntfs..sdb has four primary partitions: sdb1; sdb5,sdb6, sdb7. sdb5,6,7 are extended partitions,together put as sdb2.
sdb5 for swap, sdb6 for (/)(does this mean root partition? but /root and /home are on the same level..), sdb7 for /home; this is suse 11.0.I delete the last simple volume of sda, and divided it into three partitions: sda8,9,10. sda8 for swap, 9 formatted as ext3 for /home, 10 formatted as ext4 for /.And I want to keep the current grub, so I chose the boot loader location to "Boot from Root Partition" in Boot Loader Settings. At the last minute of installtion, a dialog tells me:
Code:
grub> setup --stage2=/boot/grub/stage2 --force-lba (hd1,9) (hd1,9)
Error 22: No such partition
grub>quit
(hd1,9) is surely sda10 which is mounted to '/'. why would grub not recognize this partition?
This error message always shows up whenever I boot to "rescue installed system" from dvd and try to reinstall grub to root partition, ie. (hd1,9). I tried to put one entry in the menu.lst of suse 11.0 :
Code:
title openSUSE 11.2
rootnoverify (hd1,9)
chainloader +1
But instead of boot into 11.2, it gives me a message "No such a partition"Until now the only successful boot into suse is through the dvd rescue mode-> boot into installed systems. later tries all failed.. with a message "modprobe: FATAL: Could not open.ko", the screen freezed, number led indicator and caps lock led both flashing on and off. I had to press the RESET on the box..
the good thing is suse 11.0 is still bootable, the current grub not crumbled..but the strange is grub cannot be installed. maybe it's due to ext4 format? In 11.0 if I try to mount /dev/sda10 to /mnt, it would say unknown file system 'ext4'.
View 9 Replies
View Related
Feb 14, 2010
I've installed openSUSE 11.1 and am using it ok.Can I now remove the Windows partition and components? If so how please?
View 9 Replies
View Related
Oct 29, 2010
I was dual booting windows 7 with opensuse 11.3 and then realized I wasn't ever using Opensuse. I then deleted the partition it was in and now I cannot boot into windows. Grub immediately takes over upon booting but doesn't detect any partitions. I tried booting from an opensuse cd and changing the boot order priority, but grub still comes up. I don't have a windows 7 installation disc
View 4 Replies
View Related
Feb 26, 2011
using Opensuse 11.3, I have used Ubuntu 9.10 in the past and have had a blast with Linux. I have to rehash some of my old skills that I have forgotten in the past several years..I installed 11.3, everything is working fine. However, I just releazed that after I installed it, I used my whole partition (Not Windows 7, or I would've been in hell). My Windows 7 is in Raid 0. My second HDD is 1 TB and 11.3 is on there. So, how can I trim down let's say 100 GB and just give the rest to Windows (800gbs). I need that much because I do editing for videos, etc. So, once again, how can I trim my partition and use it for Windows 7.
View 7 Replies
View Related
Aug 1, 2011
I'm running openSUSE 11.4 (gnome) and I'm trying to transfer files to my windows partition and it says that I don't have the permission to do so. How do I gain access to it?
[URL]
View 2 Replies
View Related
Sep 4, 2010
I bought a new laptop in which a Linux Suse Enterprise Desktop is installed,After that, I installed Windows 7 by the common method: Using Gparted CD, but the problem is that after the end of the installing of Windows 7, the latter became as the first only OS installed in, and the grub of Linux Suse has been disabled , and the only way to enable the grab (in order to use dual-boot, switch between Suse and Win7) is to use the Linux Suse CD and enter to it for enter some prompt command (as u know), but I didn't get the CD with the attached pack, I got instead of it, a System Recovery CD, the only option shown in the first page is to restore the system and not to enter it
Hence my question: How can I enter to linuxSuse to enable the grub to activate the dual-boot?Can't I enable the dual-boot from command line of Windows 7?
View 1 Replies
View Related
Mar 29, 2011
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
View 1 Replies
View Related
Apr 26, 2011
i am using mint 10 and windows 7.i want to add opensuse 11.4 to that.is there any chance to do this?i don't want to use virtual box.
View 3 Replies
View Related
