OpenSUSE Install :: Installing Gcc 4.1.1 - Error: Can Not Find Sources In . Or .."
Aug 8, 2011
I am trying to install gcc4.1.1 upon my opensuse machine which already has gcc 4.5 installed but I want an earlier version.
1) I downloaded gcc-4.1.1.tar.bz2
2) Extracted the contents
3) When I tried to run the command "./configure" on terminal its giving error "configure: error: can not find sources in . or ..". However I can see the configure file in the directory. Below are the files present in directory.
[Code]....
View 9 Replies
ADVERTISEMENT
Sep 9, 2010
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
View 2 Replies
View Related
May 10, 2010
Is there any way to install a kernel using rpms and avoid compiling its sources? I am using OpenSUSE 11.2.
View 7 Replies
View Related
Feb 22, 2010
host: CentOS 5.4
guest: FC12
Virtual Machine: Virtual Box 3.1.4
I can not for the work get Virtual Box's Additions to install in my FC12 guest. The error log (/var/log/vboxadd-install.log) shows: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
I have tried:
# KERN_DIR=/usr/src/kernels
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686/kernel
[Code]...
View 7 Replies
View Related
Jan 11, 2011
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
Quote: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL].
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide. This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source
View 13 Replies
View Related
Feb 13, 2010
I am getting some error when i compile cross compile "dbus-1.2.20". error Code: checking for XML_ParserCreate_MM in -lexpat... no configure: error: Could not find expat.h, check config.log for failed attempts so i downloaded te expat library sources i cross compiled. But again i am getting same error. I think i have to add "-lexpat" in LDFLAG. But i dont know how to do that.
View 1 Replies
View Related
Nov 19, 2009
I am quite new to centos as I am from a windows back ground and trying to change over. I am trying to install Asterisk on a dell quadcore server running centos. I need to install Dahdi for hardware support but when I try to install it I get the following error You do not appear to have the sources for the 2.6.18-164.6.1.el5 kernel installed I don't have a clue
View 2 Replies
View Related
Feb 10, 2011
I am trying desperatly to install boxee onto my pc Boxee - Watch Movies, TV Shows and clips from the Internet on your TV.without success.I have downloaded the source code from the site and have ran
./bootstrap
./configure
The ./configure last few lines =
checking for boost/shared_ptr.hpp... yes
checking for main in -lGL... no
configure: error: Could not find a required library. Please see the README for your platform.
I'm not sure what this lGL is referring to. The readme states that I need the below to run the configure, though that doesn't say lGL either?
Build-Depends: debhelper (>= 7.0.50), quilt, python-support, cmake,
autotools-dev, autoconf, automake, unzip, libboost-dev,
libgl1-mesa-dev | libgl-dev, libglu-dev, libglew-dev, libmad0-dev, libjpeg-dev,
libsamplerate-dev, libogg-dev, libvorbis-dev, libfreetype6-dev,
libfontconfig-dev, libbz2-dev, libfribidi-dev, libsqlite3-dev,
code....
View 1 Replies
View Related
Jun 16, 2010
I am trying to install suse 11 on an ibm x3400 m2 machine. After installing the various packages, i get the following error :
Error while installing initrd
Error while installing grub
There are 2 500GB hard disks on which i have configured RAID-1.let me know what the issue could be as I am new to linux.
View 4 Replies
View Related
Jan 12, 2011
This is my first linux install ever, so I have no idea what is going on. I hope I have enough information to get this figured out as soon as possible. I was bored with windows 7 and wanted to learn another operating system. I made a boot cd with openSuSE gnome. On the internal hard drive is my windows 7 boot system that i do not want to touch, and on the external 1tb hard drive, i'd like to partition 50 GB for openSuSE. If this is not possible i have another method, but i'd rather not use it (which is use my secondary 80 GiB hdd). When installing, I am getting the error, "Error occured while installing GRUB" Which shows the following:
[Code]...
View 9 Replies
View Related
Aug 3, 2011
Before installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
[Code]...
View 9 Replies
View Related
Dec 25, 2010
I am getting virtual-box repository download error as given below:
Code: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. Repository: deb http://download.virtualbox.org/virtualbox/debian marverick non-free
View 5 Replies
View Related
Aug 9, 2010
Lasted repositories: Index of /repositories/X11:/RemoteDesktop/openSUSE_11.3/i586
FreeNX-0.7.2-28.1
NX-3.4.0-21.1
To day I try install on openSUSE 11.3 and SLES11-SP1, Not finish. Error: Could not find 1.5.0 or 2.[01].0 or 3.[01].0 version string in nxagent. NX 1.5.0 or 2.[01].0 or 3.[012].0 backend is needed for this version of FreeNX.
# nxsetup --install
Removing special user "nx" ...no crontab for nx
done
Removing session database ...done
Removing logfile ...done
sent invalidate(passwd) request, exiting
sent invalidate(group) request, exiting
Setting up /etc/nxserver ...done
[Code]...
View 1 Replies
View Related
Sep 14, 2010
I am trying to install OpenSUSE 11.3 on a Dell T3500 Desktop machine. The configuration (related to the problem) of the machine is as follows:
Intel Xeon CPU W3520, 4GB RAM
Intel 82801 SATA RAID Controller
Samsung HD161GJ 160 GB SATA,
Optiarc DVD+-RW AD-7230S
When I try to boot from the OpenSUSE 11.3 x86_64 DVD, I get a curses based screen which says, "Make sure that CD number 1 is in your drive." (with OK and Back buttons). On pressing Back and trying to install again, I get an angry red dialog, which declares, "No repository found."
I tried connecting an external USB DVD drive and then booting from it, then this problem did not come and the install went to start the GUI. But then it could not find the (rather any) hard disk!
We have a set of these identical machines and the problem is fully repeatable on all of them (I tried downloading and burning the DVD image again, that didn't help). The same machines have OpenSUSE 11.1 and 11.2 installed on them and there was no such problem installing those.
View 8 Replies
View Related
Jan 30, 2011
I got this error when installing 11.3 64 with the home partition encrypted.
"Failure occurred during the following action: Setting up encrypted dm device on /dev/sda7 System error code was: -3033"
Can I encrypt /home after the install? Should I?
View 1 Replies
View Related
Feb 7, 2011
What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
View 4 Replies
View Related
May 29, 2011
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
View 4 Replies
View Related
Aug 2, 2010
When I want upgrade and/or install any package from software.opensuse.org I've got error, "Couldn't find XML file" or anything same this.
View 4 Replies
View Related
Feb 22, 2010
I'm a new linux user and I'm trying to install some files from a .tar.gz archive. I have successfully created a repository in a directory using createrepo, but I can't figure out how to add am installation source to YaST.How is it done in 11.2?
View 2 Replies
View Related
Jul 13, 2010
I have a problem installing the oporating system, from a USB. I keep getting the error: Could not find Kernel: GFXboot. I have used a USB loader to put the ISO file on the flash drive as well as extracting the file using winrar. (separate occations) I have also tried both LIVE CD as well as the full DVD.
View 1 Replies
View Related
May 26, 2011
when I am trying to install a RPM package I get the following error: failed to install file: [PK_TMP_DIR|dir:///var/tmp/TmpDir.w29lVZ] Repository already exists It tried to install DBVisualizer and Adobe Reader 9 and get the same error. Just the directory is different. How do I solve this? I tried to delete the mentioned directories but I can't find them on the file system.
View 4 Replies
View Related
Oct 14, 2010
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies
View Related
Jan 1, 2011
I have been using SDB:NVIDIA_the_hard_way and have run into a problem. When I run the script, it gives me the following error message: You appear to be running an X server; please exit X before installing
View 7 Replies
View Related
May 21, 2010
I am trying to install Ubunto 9.10 on my windows XP. I try to run it from the live cd. but every time i try to do this.. I get an error "Unable to find a medium containging live file system" I tried it from different cds too... so it's not an error in the cd.
View 2 Replies
View Related
Aug 21, 2010
I just installed Fedora 13 today, everything is working including the internet. However, when I try to get more programs it says that it cannot find the sources, and a cache reload will fix it. I wasn't sure at first what that ment, being a begginer, but I think it means going into system-refresh package lists. So I do that,ut it still wont give me the program list. I'm really confused, I come from using windows computers and I don't know what to do now, me be a little clearer, when I click on one of the catagores to find software, nothing comes up but the defalt packages that come with the system. I go into the system-Software menu, and there are no boxes cheked. I thought that this maybe to problem, so I try to cheak the top box labled without parentheses "Fedora 13 - 1386". It tells me to authenticate my action and tells me to type the root password, I do this. Then it shows the screen below. I'm running a 32 bit system,
View 1 Replies
View Related
May 29, 2011
I cant find some good sources for slapt Where i should looking for ?
View 3 Replies
View Related
Sep 1, 2011
I installed ubuntu today by installing Wubi and after downloading i rebooted computer and selected ubuntu but i got an error saying 'Try (hd0,0): FAT16: NO WUBILDR' and there was few more but i forgot and at the end it says 'Cannot find GRLDR in all device Press CTRL+ALT+DELETE to restart'. it used to work when i had vista...
View 3 Replies
View Related
Mar 18, 2010
I've been having some problems with updating recently. Whether I update using Synaptic, or apt-get, it hangs at the end, and gives various messages as at the bottom of the below apt-get update:
Ign cdrom://[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53] lenny Release.gpg
Ign cdrom://[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53]
[code]...
View 1 Replies
View Related
Dec 28, 2009
How can I use DKMS to force the virtualbox setup to run using the correct kernel sources? This is the error I'm getting in the vbox logs
Code:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.2
Deleting module version: 3.1.2
completely from the DKMS tree.
Done.
Creating symlink /var/lib/dkms/vboxdrv/3.1.2/source ->
/usr/src/vboxdrv-3.1.2
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.31.6-166.fc12.x86_64 cannot be found at
/lib/modules/2.6.31.6-166.fc12.x86_64/build or /lib/modules/2.6.31.6-166.fc12.x86_64/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Failed to install using DKMS, attempting to install without:
Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
Code:
[root@nevada Downloads]# uname -r
2.6.31.6-166.fc12.x86_64
View 8 Replies
View Related
Oct 24, 2010
Installing from sources was always complicated to me, but biggest problem is installing when some strange dependencies are "missing". Let's do it on example - I am sure it will benefit lots of users.I have a unmodified ubuntu 9.10 (Karmic) on 64 bir architecture. I download latest Grisbi sources from official web page.I didn't modify any paths to system variables...and it's usually problem with glib or gtk with all other sources I try to install.
1) Could someone help me in this particular case with missing dependencies please?
2) What every User should do when trying to install from source and some libraries are missing?How to find them? How to install them ?
View 4 Replies
View Related
