Hardware :: Nvidia GeForce 9600gt - Error Message About Running In Low Graphics Mode
Mar 15, 2010
So I've searched across these forums and haven't quite found the same problem I'm having. For the record, I'm running Ubuntu 9.10 So I built my new box, and my video card is a Gigabyte Nvidia GeForce 9600GT (GIGABYTE GV-N96TZL-1GI). I go to System > Administration > Hardware Drivers to install the drivers so I can use those fancy 3D effects. It tells me I need to restart, so I do.
When it comes up though, I get an error message about running in low graphics mode, the top 5th of my screen is blacked out, and the screen has been shifted so that the left boundary is in the middle, and the right boundary goes off the screen and back to the left side. It goes back to working fine (but without the fancy 3D effects) when I remove the drivers. Both drivers in the hardware drivers (185 and 173) have this problem. I'd post log files and such, but I'm at work right now.
First off, I am still using 10.04. This hasn't happened to me until now. I was in Vista (I have vista on another partition) doing some things in Photoshop, and I saved it, and done. I restarted to go back into ubuntu and when it was booting it gave me a message saying: Ubuntu is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself.
If I click OK (there are no other options) it takes me to a screen asking, "What would you like to do?" The options are: Run Ubuntu in low-graphics mode for just one session Reconfigure graphics Troubleshoot the error Exit to console login Restart X
I am running a mentor graphics tool which used java-jre. Every time I try to invoke the tool I get the following error message
From the error message I thought gcc_4.2.0 is not installed in my system. I went to synaptic package manager and installed gcc_4.2, but I still get this error.
Initially I was using my onboard 6150, but I bought the 9600 and used it for a week. The fan was too noisy, so I decided to switch back, but now when gdm is started the screen goes black, the LED on my monitor turns orange. First I tried switching to a virtual terminal, which didn't work.
I did a hard reboot and popped in a rescue disk. When I tried mounting my root file system to look at look at the log files, at least /bin and /lib became inaccessible. Finally I booted into the live cd I'm running now.
Recently I switched my kernel (to 2.6.32-5) via apt, with some irregularities, but the problem existed before I switched so I doubt that's the problem.
note: I have a working xserver now, so there shouldn't be anything wrong with the graphics chip itself.
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
I attempted to install restricted drivers using jockey-gtk, was told to reboot and drivers would take effect. Rebooted and got no graphics, after some finagling I was able to delete xorg.conf and I now have horrific looking graphics. Defaulted to current version or 195 (which is also the only option I see in the jockey tool, however in synaptic/apt I see I can install other versions.
After installing "nvidia-driver" and "nvidia-kernel" through "sbopkg" I ran "glxinfo | grep -i nvidia" as user (not root) Shows: "Xlib: extension "GLX" missing on display ":0.0". GLUT: Fatal Error in glxinfo: OpenGL GLX extension not supported by display: :0.0" I'm really sure that there is a problem with this or error instead. Or is there any other way of installing nvidia..? "uname -a" "Linux purple 2.6.29.6 #2 SMP Mon Aug 17 11:58:18 CDT 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux"
Quote:
Linux is not user-friendly. It _is_ user-friendly. It is not ignorant-friendly and idiot-friendly.
I have a problem with a new GeForce 8600GT graphics card. I just installed the card into my Dell Optiplex 745. When I boot the PC I have no image until the Ubuntu logon box comes up. No bios info, no boot menu, no grub menu, nothing until the Ubuntu login. Once I get to the logon prompt everything seems fine except when I use CTRL+ALT+F1 to get to a console. Then I get nothing but a blank screen. When I press CTRL+ALT+F7 my desktop loads fine and all is OK again. I had a problem trying to get the nVidia drivers installed because I didn't have a usable console. I had to use SSH to install the drivers. I'm using this card with an HP 1755 flat panel that's about 5 years old and a Dell Optiplex 745 with Intel Dual-Core CPU.
I already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.
The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:
We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.
I get the error when booting "ubuntu is running in low-graphics mode"(EE) Failed to load module "1810" (module does not exist, 0)(EE) config/hal: couldn't initialize context:unknown error (null)This happened after updating unbuntu and an error happened while updating. I don't recall what the error was. I cannot run ubuntu in low graphics mode, it goes to black screen and nothing happens.
I have a bit of a problem with the proprietary nvidia driver which I installed as a binary on suse 11.3, when I run the nvidia-settings gui it does not give any widescreen display modes as options. My monitor is an Acer x193w which will do 1440x900 but there is no option for that. The monitor is just listed as a generic CRT, and only 4x3 display modes are given. My card is a PNY Geforce 6200 AGP 512MB.
A few days ago, I upgraded my system from the EOL 9.04 to 10.04LTS. This did go relatively well, though the upgrade process reported some "could not update" errors for the NVIDIA drivers and at the first boot it reported it had to start in low graphics mode. I noticed that I had manually installed drivers from NVIDIA's website before the upgrade, while afterwards the hardware drivers from the package manager had been enabled. I then disabled Ubuntu's drivers, and attempted to manually reinstall NVIDIA's own drivers.
This resulted in some errors related to the install script not being able to find some vdpau related stuff. Something interesting then occured. As root everything worked flawless, but as normal user I still ended up with errors resulting Ubuntu to continue in low graphics mode. So I enabled the package managers driver again. This seemed to solve all issues for the next 5 boots. Until this morning, I again get a black screen with only a blinking "_" on the screen for quite some time, after which (nice feature) Ubuntu proposes to continue in low graphics mode.
Here is a relevant part from my syslog: Aug 10 08:17:53 linux kernel: [24.075265] [TTM] Zone kernel: Available graphics memory: 1028724 kiB. Aug 10 08:17:53 linux kernel: [24.075275] [drm] nouveau 0000:04:00.0: 256 MiB VRAM Aug 10 08:17:53 linux kernel: [24.097167] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture) Aug 10 08:17:53 linux kernel: [24.098283] [drm] nouveau 0000:04:00.0: Allocating FIFO number 1 Aug 10 08:17:53 linux kernel: [24.102934] [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1 Aug 10 08:17:53 linux kernel: [24.103515] [drm] nouveau 0000:04:00.0: Detected a DAC output Aug 10 08:17:53 linux kernel: [24.103518] [drm] nouveau 0000:04:00.0: Detected a TMDS output Aug 10 08:17:53 linux kernel: [24.103521] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown Aug 10 08:17:53 linux kernel: [24.103522] [drm] nouveau 0000:04:00.0: Detected a DAC output Aug 10 08:17:53 linux kernel: [24.103526] [drm] nouveau 0000:04:00.0: Detected a VGA connector Aug 10 08:17:53 linux kernel: [24.103577] [drm] nouveau 0000:04:00.0: Detected a DVI-I connector Aug 10 08:17:53 linux kernel: [24.858579] nvidia: module license 'NVIDIA' taints kernel. Aug 10 08:17:53 linux kernel: [24.858583] Disabling lock debugging due to kernel taint Aug 10 08:17:54 linux kernel: [25.401599] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 Aug 10 08:17:54 linux kernel: [25.632700] NVRM: The NVIDIA probe routine was not called for 1 device(s). Aug 10 08:17:54 linux kernel: [25.632704] NVRM: This can occur when a driver such as nouveau, rivafb, Aug 10 08:17:54 linux kernel: [25.632705] NVRM: nvidiafb, or rivatv was loaded and obtained ownership of Aug 10 08:17:54 linux kernel: [25.632706] NVRM: the NVIDIA device(s). Aug 10 08:17:54 linux kernel: [25.632708] NVRM: Try unloading the conflicting kernel module (and/or Aug 10 08:17:54 linux kernel: [25.632709] NVRM: reconfigure your kernel without the conflicting Aug 10 08:17:54 linux kernel: [25.632710] NVRM: driver(s)), then try loading the NVIDIA kernel module Aug 10 08:17:54 linux kernel: [25.632711] NVRM: again. Aug 10 08:17:54 linux kernel: [25.632713] NVRM: No NVIDIA graphics adapter probed!
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
I cannot get my driver to work in 10.04 LTS. I've googled all around and still can't fix this. Randomly when I boot up it says ubuntu is running in low graphics mode. It was working yesterday. I had this problem before and it just randomly fixed its self. I have an Nvidia 320m graphics card with drivers from the hardware drivers program.
I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line. I think I accidentally uninstalled some packages clicking at completelly removal at some ipod utillities in synaptic. How can I fix this?
I'm running Ubuntu 9.10. I tried a solution for a wifi problem (wasn't always connecting) and now when I reboot I get "Ubuntu is running in low graphics mode" along with a bunch of EE messages. When I click OK it gives me "Run Ubuntu in low-graphics mode for just one session." Which gets me back to the desktop.
I am getting the following upon booting up after upgrading from 9.10 to 10.04 Beta:
Ubuntu is running in low-graphics mode. The following encountered. You may need to update your configuration to solve this
(EE) intel(0):[drm] failed to set drm interface version (EE) intel(0):Failed to become DRM master (EE) intel(0):failed to get resources:Bad file descriptor (EE) intel(0:Kernel modesetting setup failed (EE) Screen(s) found, but none have a usable configuration.
I then press the OK button (no other option given). Then I'm presented a menu with the following options:
(x) Run Ubuntu in low-graphics mode for just one session ( ) Reconfigure graphics ( ) Troubleshoot the error ( ) Exit to console login ( ) Restart X
Cancel and OK buttons. I choose OK and the system seems to boot ok.
I'm not sure what is wrong or how to go about solving this one.
(Consider yourselves forewarned: I'm completely new and will be incredibly stupid. Give me slack. )
So I'm trying to run my S-Video cord from my HP Desktop to my television screen. Everything was set up, then I looked up how to get it to start playing on forums here. I went to my NVIDIA, and when I went to change what apparently had to be changed, it was already set up in the format I was supposed to set it up as. I hit "save", and then restarted my computer, as the step-by-step instructions said. Upon restarting, I got an interesting message saying that Ubuntu had to be run in low graphics mode. I don't know the logistics of my computer, or really anything (it was given to me, and I don't know how to check ) I've been reading some things here, and a few things sounded like what was wrong with me, but when I followed the directions, it got me no where. I'm coming to you to prevent me from chucking this thing out my window .
So, what I'm asking from you:
1)How do I get out of Low Graphic Mode 2)How do I set up my NVIDIA to play to my TV?
Ubuntu is running in low graphics mode.Your screen, graphics card And input device settings could not be detected correctly. You will need to configure these yourself. ( If we press OK ) ( A dialogue box appears.) What would you like to do
*Run ubuntu in low graphics mode for just one session * Reconfigure graphics. *Troubleshoot the error. *Exit to console login. *Restart X. cancel/ok
(If we cancel Commands appear like this
Ubuntu 10.04.2 LTS johnson-desktop tty2
johnson-desktop login:-
(If we press OK another dialogue box appears.)plz help me for solving this problem
I can run Ubuntu 10.04 just fine as long as I have my hardware drivers disabled, but when I enable my hardware drivers I get an error before the GDM login screen that says something to the effect of it being unable to load the NVIDIA KernelI'm then given the choice of booting into low-graphics mode, configuring xorg for this hardware, troubleshooting, dropping to console, or restarting X.Booting to low-graphics mode does nothing useful, just boots to low gfx mode.Configuring xorg for this hardware does nothing at all - same errors after trying every single option in the configuring xorg sectionTroubleshooting is equally useless to me - I can't copy and paste the very-long error reports, I'm not an xorg pro so editing the xorg conf doesn't help me, and when I tried following the option to export all my config and error logs, it said that it has exported it to $xorg_backup_file - but that's just a variable not a file.. after a reboot I can't find this anywhere.
I've googled this and the only useful info I've found is to run nvidia-xconfig as root, which I've done and it has zero effect.The only temporary solution is to disable the nvidia driver, which lets me boot normally using metacity at full resolution, but has no accelerated 3d or composite overlay so I'm unable to run compiz or have any nifty 3d.Details: Vid card: NVIDIA G96 (according to lspci) Driver: NVIDIA accelerated graphics driver (version current) [Recommended] OS: Ubuntu 10.04
sudo apt-get purge nvidia* sudo apt-get install nvidia-current sudo update-alternatives --config gl_conf (not sure what to choose, I just pick an option at random) sudo ldconfig sudo nvidia-xconfig
and then restart gets everything apparently working correctly, with my desktop spread across two monitors.
However, after two or three computer restarts, it 'forgets' and defaults back to low graphics mode and all the common error messages mentioned in multiple threads here, with my second monitor just duplicating the primary monitor.
Under System-Hardware drivers it says Nvidia_current is activated but not in use, regardless of whether it starts normally or in low graphics mode.
What's up? It's a pain to have to go through that sequence over and over again, and then restart my computer every two or three days, and leaving the computer on 24/7 isn't an option. power saving and all that.
I have been running 10.4 with no problems for some time now. Today when I booted up it started checking the drive for errors, and I just left it to do its thing. I came back to this warning screen: Ubuntu is running in low-graphics mode.Your screen, graphics card, and input device settings could not be detected correctly. I've tried all of these with no luck. When I select to run to low graphics mode, it says "Stand by one minute while the display restarts...OK".I select OK and then it gets stuck checking for battery state.I try to reconfigure the graphics, and nothing happens when I select any of the options on the next screen.
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
If I let my computer sit for about 10 minutes, I lose all the windows I had open (gnome) and i get a message saying I'm running in low graphics mode. I have to restart X in low graphics mode to get it to work. i can't tell the difference, but as an avid writer, I often feel the need to get up and think about whatever I have open in oowriter.
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
Quote: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL].
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide. This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source
First off, I'll come clean and admit that I am still relatively green to Linux, but I'm not afraid to tackle the complex. I have a few stroke-inducing issues that I haven't been able to resolve as a usually do by eye-grepping Google and the various forums. Of course, I'm running Ubuntu 11.04 with Unity - which is fairly new and undiscovered country.
I've got this no-name brand, sample laptop from a manufacturing partner of ours out of Shenzhen China. It's rocking a Core i3 M350 with an nVidia GT 330M (discreet-ish?)& apparently some flavor of Intel integrated graphics.
Now, there are so many variables at play, I'm not quite sure where to begin - so please bear with this post a bit longer as I unravel the details. Loading the nVidia drivers (both proprietary and the experimental open varieties) results in Unity no longer working and dumping me back to the classic Ubuntu desktop. I believe it has something to do with the fact that I have no ability to disable the integrated graphics through the BIOS and Ubuntu has set its hopes and dreams upon using Intel graphics for the rest of all time.
That said, running without the nVidia graphics drivers, I am able to use Unity and it runs pretty well.The only caveat being that on occasion (read: intermittently), when the laptop wakes up from suspend/hibernate mode, playing Flash video in full screen gets choppy (stutters). Restarting Ubuntu resolves the issue. I suppose I should verify that I am using Firefox 4.
In addition, there are times that the WiFi adapter will not wake, and using the keyboard function key to power cycle it ceases to function. A complete shutdown is required to address this one. i.e. Restarting and warm-booting does not fix it.
Did I mention Skype is a terd? I don't actually expect a fix for this pile of hot mess - just thought it might make someone laugh. If there is anyone here that could lend me a hand with any or all of these issues, not only will you have the satisfaction of knowing that you are one bad Mambajamba (TM), but I'll buy you a drink or something via Dwolla or bitcoin.
