OpenSUSE Install :: 11.4 As VM Running On VMWare Server 1.0.10 Under WinXP
Aug 15, 2011
I am trying to install openSUSE 11.4 as a virtual machine running on VMWare Server V1.0. VMWare Server is running under WinXP 32bit.
I configured the VM with the following settings:
10GB disk
512 MB Ram
The installation starts from the DVD after inserting the disk. OpenSUSE setup appears, i do not touch the default resolution 800x600. Every thing is looking good. After setting the language, the installation process continues. Then a problem with the screen/resolution/graphical adapter appears. After a while I cannot read anything from the setup screen, everything is unreadable. I remember I had those problems already with 11.3 but I did not follow this issue an took openSUSE 11.1 instead. With 11.1 I could follow the installation instruction till the end and I got a running system.
View 7 Replies
ADVERTISEMENT
Sep 21, 2010
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
View 9 Replies
View Related
Jul 30, 2010
My office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.
View 1 Replies
View Related
Mar 6, 2010
Is it possible sitn opensuse 11.2 to install vmware server or another free vmware?
View 9 Replies
View Related
Jan 27, 2010
I just loaded openSUSE 11.2 64bit and can't get VMware server to install. I had it working just fine in 11.1. I installed: kernel-source, make, gcc, gcc-c++, downloaded VMware server RPM installed with Yast. opened a console went root and ran: /usr/bin/vmware-config.pl. Make aborts with the following few lines:
Prior to this had a whole rift of Warning Such as:
Unable to build the vmmon module.
In the past I followed instructions I down loaded for "swerdna" and it worked well.
View 6 Replies
View Related
Jan 5, 2011
first of all, please excuse my bad english. We rent a dedicatet server at Strato.de.I need to install VMWare Server. Actually this should be no Problem for me. I installed the server an patch.When I run the vmware-config.pl starts the problems:
Code:
Your kernel was built with "gcc" version "4.3.2", while you are trying to use "/usr/bin/gcc" version "4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler "/usr/bin/gcc" version "4.3" anyway? [no] I submit "y".
[Code]...
View 3 Replies
View Related
Feb 9, 2010
I just had one hell of an experience trying to get openSUSE 11.2 to run on VMware server 2.0 on a Windows XP host. I am posting some instructions on how I finally got things working.
1) Download the openSuse iso image (and add-on CD if needed)
2) Download and install the VMWare server
3) Before you try to start the server console, you will need to configure the web access to allow you to log on. go to press Start->Programs->VMware->VMWare web access->Configure Tomcat
4) on the logon tab check logon as: option
5) add your account there and set the password
6) Now in your web browser (I use firefox) access the console via: [url] [url]
7) Before you start to create a virtual machine, you will want to set up the server to have access to your iso's. The server will only allow VM's access to specific directories through "datastores". You can either move the iso images to what has been specified as the default datastore... or create another datastore that points to the where you have the iso's.
8) Now we can create our virtual machine. This is simple, just press the button and follow the prompts.
a) at some point it will ask about an CD-Rom, you will want to use your suse DVD iso image. Select the option and then navigate the datastore that contains the image. Once found click and continue.
b) Network interface has 3 choices:
Bridged - the virtual machine will appear on the network as any other computer. Allows the VM to host server applications. User needs to have control over the network to ensure DHCP requests are handled (or static IP is assigned).
NAT - VMWare server will manage a virtual router, the VM is then connected to this router. On this router, the hosts internet is used as the WAN. Users do not have to have control of the network, but will have to setup port forwarding in VMWare to host server applications
Host Only - This means that the virtual machine can only talk to the host. The only way to get networking is to have a proxy through the host machine. This is setup on the host independent of VMWare. Users do not need control of the network, but control over the host. I doubt you could host server applications though.
9) With the VM created we can start it up. We can open a window to it through the console tab of the VMWare server console. When I first started it, it was stuck looking for an OS once the console finally rendered the graphics. A reset, an F2 at the post and selecting the appropriate boot media for boot got the installation started.
10) Install Suse as you would any other suse installation. I added a separate partition for swap, but kept the rest on one big one. Others may still want to maintain the separation of home and root
11) ---- Important Error/Solution ----
Once the installation has completed many will notice that the mouse or keyboard does not work! This was the source of my biggest head-ache. Some may think it was a problem with VMWare tools... I tried that to fix that and found the tools were working properly.
View 7 Replies
View Related
Mar 17, 2011
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies
View Related
Mar 20, 2011
Is there some better way of getting my display size set to 1280x960 when I launch openSUSE 11.4 under VMware Server? Here's what I've done so far: I am running Windows 7 on an AMD Phenom II system (motherboard: Gigabyte 880GMA-UD2H). I installed VMware Server (version 2.0.2) so that I can run openSUSE 11.4. The initial install went pretty smoothly. However, the display size was set to 800x500. I attempted to set it to 1280x960 by changing the /etc/X11/xorg.conf.d/50-monitor.conf file as follows:
Code:
/etc/X11/xorg.conf.d/50-monitor.conf
Section "Monitor"
Identifier "Default Monitor"
## If your monitor doesn't support DDC you may override the
## defaults here
# HorizSync 28-85
# VertRefresh 50-100
HorizSync 1-10000
VertRefresh 1-10000
## Add your mode lines here, use e.g the cvt tool
Option "PreferredMode" "1280x960_60.00"
# 1280x960 59.94 Hz (CVT 1.23M3) hsync: 59.70 kHz; pclk: 101.25 MHz
Modeline "1280x960_60.00" 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync
This resulted in a display size of 1734x1342 (or something close to that). I noted from the /var/log/Xorg.0.log file that the vmwlegacy driver is being used instead of the vmware svga driver. There is a note that the vmwlegacy driver does not support the "PreferredMode" setting in the monitor section of the xorg.conf files. For the time being, I have set my horizontal and vertical rates to 60kHz and 60Hz, respectively. This does limit the maximum display size to 1280x960, but for all the wrong reasons. How do I set up my system to get the correct display size?
View 4 Replies
View Related
May 11, 2010
I installed Ubuntu 10.04 inside VMware Player running in a WinXP SP 2 host. But Ubuntu can't seem to get any keyboard input. This means I can't even log in, as I can't type the password. I clicked in the VMware window, and tried pressing Ctrl+G etc, but to no avail. Anyone else encountered this issue?
View 7 Replies
View Related
Apr 14, 2010
i just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies
View Related
Feb 12, 2010
I have on my computer 9.1 and I want to try some virtualization. I want to install WinXP or 7 as guest on my U9.1 box. what is your opinion? Which VMware or VirtualBox should I try?
View 1 Replies
View Related
Jul 28, 2009
I am running VMware workstation on a Linux host and WinXP guest using NAT. I have shared a folder on WinXP, and I am able to mount it on the linux host with:
mount -t smbfs -o username=Administrator,password=mypasswd //192.168.100.129/Shared /mnt/tmp
This works fine. However, I want to mount the same folder from a different linux machine (not the host).
I added port forwarding in /etc/vmware/vmnet8/nat/nat.conf:
[incomingtcp]
#445 = 192.168.100.129:445
If I run:
mount -t smbfs -o username=Administrator,password=mypasswd //external_ip_number/Shared /mnt/tmp
I am getting:
mount error 112 = Host is down
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
It doesn't work even if I try the above command from the linux host itself. It only works if I use the internal IP number. I suspect vmware is not forwarding port 445 but I am not sure how to verify it. I am not running smbd on the linux host, in case that make any difference. I didn't think that was required because the server is really on the WinXP and the linux is just a client.
View 3 Replies
View Related
Feb 5, 2010
I just did a basic service install of Centos5 and added the RPM package install of VMware-server 2.02. but I don't the VMware service is running (based upon the flowing screen:
[root@centoshost1 vmware-mui-distrib]# ps
PID TTY TIME CMD
2925 pts/0 00:00:00 bash
22378 pts/0 00:00:00 ps
So how do i start the VM service?
View 3 Replies
View Related
Mar 28, 2011
I presently have an Ubuntu server 64-bit running VMware Server 2.0 in a test lab. The server was created using the default partitioning method during the installation. So I have what I think is just one huge 300GB partition along with what I hear is a uselessly large swap partition.
I keep reading that theres an advantage to creating dedicated partitions, especially for the the VM datastore.
If the advantages are true then I would like to re-partition the drive.
What partitions should I define and how big should the be?
View 9 Replies
View Related
Jan 15, 2011
I have a private server which I stream media from, but since I've installed VMware running Windows 7 and set up Windows to used a bridged connection, so I can access the network drives in Windows. Now that I have done that, I cannot connect to my home server unless I have VMware running.
I only want windows running when I need it, but I need access to my server at all times.
View 1 Replies
View Related
Aug 17, 2010
I need to install Windows XP on a Toshiba R100 laptop, which has no CD or floppy drives, but which supports PXE boot over a network. I have a Kubuntu 10.04 box, which I believe can be set up as a PXE server. Is it possible to install WinXP onto the Toshiba R100 as a client from my Kubuntu box as a PXE server?
View 1 Replies
View Related
Mar 6, 2011
I am attempting to make my HP DV6000 laptop dual boot with WinXP and OpenSuse 11.3. I've upgraded the hard drive in this system to 500GB and have WinXP in a 100GB primary partition. There is also a 12GB system recovery logical partition. In preparation for Linux, I used the Windows disk manager to create a 50GB primary partition. I've defragged and run check disk on both of the primary partitions and found no problems.
For the Linux install, I downloaded the OpenSuse 11.3 DVD image using metalink and DownLoadThemAll so I'm pretty confident I got a good image. I burned it to a DVD, verified that, then verified the install image using the openSuse installer. Everything looks good. When I attempt to do the install of Linux however, the suggested partitioning says that it wants to delete partitions /dev/sda1 (99.06GB), /dev/sda2 (48.83GB) and /dev/sda3 (11.72GB). In each case, it says resize is impossible due to inconsistent fs, Try checking under windows.
It then says that it wants to create three new volumes for /dev/sda1 (2.01 GB), /dev/sda2 (20.00GB) and /dev/sda3 (443.75 GB). In other words, it wants to devote the entire disk to Linux.
I thought that I would be able to tell it to install Linux in the 50GB partition that I had created for it and that it would subdivide that into volumes as appropriate. If it wanted to delete that partition and create a new one that would be fine too, but I don't understand why it thinks that it needs to delete the WinXP and recovery partitions.
Is there a way I can work around this by using either the Create Partition Setup or Edit Partition Setup options available in the installer? Or better yet, is there something I can do via windows partitioning before I install that will prevent it from wanting to delete my windows partitions in the first place?
View 9 Replies
View Related
Jun 19, 2011
I've reached the point where I rarely need to boot into my physical WinXP install, which is a total mess right now as well ... so I've decided that I want to completely remove it from my system, then create a virtual install of Vista Business Edition.
View 4 Replies
View Related
Apr 3, 2011
I have a box which I want to make a Samba PDC opensuse 11.3 server, but it doesn't have monitor nor keyboard during normal use. After a standard installation with keyboard and screen, I will have to remove the screen and the keyboard for lake of space. Are there ways to monitor this linux server through my laptop so it act as the screen and the keyboard of the linux server? At any times, the laptop is running desktop opensuse 11.3 or windows XP.
View 9 Replies
View Related
Nov 18, 2009
I am trying to use Xen tools to run multiple operating systems on my machine. The problem is that when I try to install Windows (32) XP (using "hvm" build) it crashes ! It crashes after it starts copying some files (immediately after formatting) at 18%/20%). I can't see the cause of this such a crash, I know it's a crash because I told it to restart on case. Here is my configuration file:
Code:
name="WindowsXP"
memory=256
maxmem=512
[code]....
View 4 Replies
View Related
Jan 12, 2011
I need to remote access a PC(running winxp) from my laptop(running ubuntu 10.10) over internet.
View 1 Replies
View Related
Jun 10, 2011
I played the apprentice sorcerer trying to install mysql workbench by my own and I messed up the system 11.1 by removing accidentally some libraries and decided to jump on 11.4 by using the update feature from the DVD. It worked all good (it seems at least: I didn't lost any datas and all my servers are running ok) but there is no more X11 server (kde) running for the run level 5.
I checked the inittab file and it is set to 5. I can log on root account and now I'm searching how to install kde on this new 11.4 system. I didn't yet tried the failsafe option at boot. Is there a way to set up kde from the internet, my wifi connection is ok ? I saw that yast was not installed nore zypper nore yum. Do I first try another update to fix it (if possible) from DVD?
View 5 Replies
View Related
May 19, 2010
I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
View 1 Replies
View Related
Sep 14, 2010
I've accidentally changed /usr/bin/php file on my server by running a cp command. I know this is bad, i just don't know how bad. Everything is working fine (websites using php), so i just wanted to know what this action could cause and also how can i restore original content.
View 4 Replies
View Related
Jun 5, 2010
Everything works fine; No problems running WinXP from an ISO, etc. I have several Windows only applications which I want to run on the WinXP VM. I cannot see the programs I have downloaded when using Explorer for Windows.Ordinarily, in a WinXP only system, I just find the program to be installed and double click on it to start the automatic installation routine.In this case, I cannot see any of the .exe files used for the install.I have placed those downloaded Windows application in the same directory on my Ubuntu Box as where VirtualBox, the Sun Guest Editions and the CD Image of the Garmin Trip and Map system.I installed the Garmin system directly from and ISO of the CD I made using Brasero. It works without a hitch.Should I take the Windows e.e programs and burn them to a CD and then transfer them as ISO tback to the VM drive?
View 3 Replies
View Related
Mar 6, 2010
you can install vmware on opensuse but can you run windows server 2008 from vmware installed on opensuse?
not that i care, but the only use of vmware ive used is for network simulation
honestly i'm not sure what vmware is for besides that, exept i've heard for programming I think
View 9 Replies
View Related
Apr 28, 2010
I cannot install ubuntu server 9.10 to vmware server 1.0.6.. is it the version of my vmware? everytime i try to install ubuntu 9.10, nothing happens..
View 2 Replies
View Related
Dec 6, 2010
Was running dual boot 10.10 and winxp on a MSI P4M900 motherboard. Have two HDs - one with OSs and some storage and the other purely backup for storage and Ubuntu home. Motherboard died and going to be replaced by Gigabyte G31 board. I will be using the same video, audio PCI cards and memory from old board. Should I look to a clean install of 10.10 and then bring back to life from my backup files (bookmarks, email etc) or could I plug in hard drives and boot normally? There is conflicting advice when I google - some say its OK just to boot, the kernel will sort out the new mboard drivers, others say you need a clean install.
View 2 Replies
View Related
Jul 27, 2011
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
View 5 Replies
View Related
