OpenSUSE :: Running A Nvidia Gtx260 And Have Installed Nvidia Drivers For Series 6 And Up?

Jun 9, 2010

opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.

View 9 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Nvidia GTX260 Driver - Try To Start X Says That My Card Is Not Supported

May 19, 2010

I just got a new computer and I have been busy setting it up with openSUSE 11.2. I am trying to install the Nvidia proprietary driver for my graphics card, a Geforce GTX 260, but it will not work. I added the Nvidia repository and I am installing the driver for GeforceFX series cards but every time I restart I get a command prompt and if I try to start x it says that my card is not supported. This is really getting frustrating, I need the proprietary driver so I can play DDO with Wine.

View 2 Replies View Related

Ubuntu :: NVidia 96 Series Drivers For 11.04?

May 8, 2011

The correct 96-series nVidia drivers for 10.10 weren't issued until several months after that release. Now they do not work for 11.04 and no one on the Ubuntu forums seems to know the correct information about work arounds, I stumbled onto the X.org drivers but I do not know if I have them installed correctly or not. I am getting 1280 x 1024 at supposedly 0 Hz but probably 60Hz. It is a good work around as OC is used mostly for text editing and e-mail.

View 5 Replies View Related

General :: Opensuse 11.3 Nvidia Gtx260 Dual Display - Xinorama - Extended Desktop Mouse ?

Jan 14, 2011

Recently installed OpenSuse 11.3 on my system, Setup dual monitors w/ the latest Nvidia driver from Yast repo : download.nvidia.com

Initially twin view ( same desktop viewed on both monitors ) worked no problem

Once xinorama was enabled to extend the one desktop across both I encountered a mouse issue.

Main monitor is on the right, 2ndary on the left... When I drag the mouse from the right monitor over to the lest.. the cursor appears to get stuck on the left monitor's right hand edge.. it flickers as i move it around...

If I drag the mouse to the right a few whole mousepad lengths it will come back to the right...its like fighting to bring it back..

View 1 Replies View Related

Fedora Hardware :: NVIDIA Generic 6 Series Drivers?

Sep 25, 2010

I've done my best to fix this but, after encountering numerous problems, it's become apparent that while I might be a pretty good Windows user, I don't know bugger all about Linux and evidently you need to be 1337 just to install drivers, but anyway...

I have a NVIDIA 6800 GT graphics card, old but still functioning properly. Fedora 13 didn't install any drivers automatically, so I went to the NVIDIA site to see if they supported their cards under Linux. They did... sort of. It seems they only provide a 'generic' Linux display driver for x86 architectures, which wasn't preferable but it was the best I was going to get, so I downloaded it. Their site provides a setup Readme, but I've run into countless problems and finally I've come up against one that it doesn't document.

First was the fact that I couldn't install it with X window running. I assume this is the base UI for Linux, so I rebooted into run level 3 and tried again, at which point it complained about a 'nouveau' process still running. I added the line rdblacklist=nouveau to my boot so that this wouldn't be enabled, but then it complains that my GCC is missing. So, I install the GNU Cross Compiler with the Fedora RPM manager, but now the setup complains that my 'kernel source tree' can't be found and asks me to install it - but what exactly is a kernel source tree anyway?

Log file outputs the following:

Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Sep 25 20:08:50 2010
installer version: 256.53
option status:

[Code]...

View 2 Replies View Related

OpenSUSE Hardware :: Nvidia Drivers Installed But Not Active?

Oct 23, 2010

i have just installed opensuse 11.3 on my PC and updated all packages and all and then i installed nvidia drivers from this link SDB:NVIDIA drivers - openSUSE i downloaded the 1 click install file nvidia.ymp and installed the driver successfullybut then when i rebooted the PC for the driver to work,it doesn't work,and when i go to system>look and feel>desktop effects and i try to enable the effects i get the message that i cant enable the effects it gives me this message "Desktop effects are not supported on your hardware / configuration. Would you like to activate them anyway?" PS i say "no" to this message and it closes but i notice there is a constant use of 33% of the CPU and theres an unnamed/unknown process in the system monitor that keeps appearing and disappearing...thats quitrd because i installed opensuse 11.2 and 11.3 before and i never had these problems

View 3 Replies View Related

Debian :: Install The Nvidia Package As The System Has A XFX 9 Series Card Installed?

Jul 19, 2011

I'm very new to Linux and have recently installed Debian Squeeze on my pc. I'm trying to install the Nvidia package as the system has a XFX 9 series card installed. I'm unable to get stop X to complete package installation. I keep getting permission denied when I run the command /etc/init.d/gdm stop. After reviewing a few forums I also log in as root to the console and tried the command there as well. I'm still getting the permission denied response. Can anyone advise on how to get around this?

View 2 Replies View Related

Ubuntu :: Nvidia Drivers Can't Be Installed?

Apr 16, 2010

When i was on the live cd installing ubuntu it said i could install my driver but now that i am running off the hard drive it doesn't pick it up under "Hardware Drivers"

View 3 Replies View Related

Fedora :: Nvidia Drivers Not Installed Properly?

Feb 1, 2010

I seem to have an issue with my nvidia drivers again.I get them working, then the next lot of updates to fedora seems to revert any progress I've made.Currently I can't run any 3d accelerated applications, no wine, no games etc, I have followed the documentation, installed the driver, added the blackist to noveau into boot.conf, and restarted

Code:
[james@nevada ~]$ uname -r
2.6.31.12-174.2.3.fc12.x86_64

[code]...

View 3 Replies View Related

Ubuntu Installation :: Can't Get The Nvidia Drivers Installed?

Sep 9, 2010

I'm installing 10.4 fresh but I can't get the Nvidia drivers installed. I'm using a 9400 GT. Ubuntu installs normally but when I try to enable to the proprietary driver, I get an error on reboot "Failed to initialize NVIDIA graphics device" and have to restart X. Any suggestions on how to get this working?

View 9 Replies View Related

Ubuntu :: 11.04 - NVidia And Unity (Drivers Installed But Not In Use)

Apr 30, 2011

I've just installed the brand new Ubuntu 11.04 and all goes well until...I log in a session. There is a window telling me that my graphic card isn't too good to run Unity, when I have no problem under 10.10 to run all the eye-candy. Now I have a NVIDIA Quadro NVS 120M with 512 megs of memory. I've install the NVIDIA current driver in the Additional Drivers application and reboot. But nothing...in the additional driver app it says that the current driver is installed but not currently in use...what should I do before giving up and install unity-2d?

View 2 Replies View Related

Software :: Have Two Proprietary Nvidia Drivers Installed?

May 13, 2010

I want to run both World of Warcraft and Steam under wine, but WoW won't work with the latest 195.x.x driver, and steam won't work with the previous 185.x.x driver.

Is it possible to have both installed, and to switch between them as needed for different applications? Or will I really have to choose between one or the other?

View 1 Replies View Related

Fedora Installation :: Unable To Get Nvidia Drivers Installed In 10?

Feb 19, 2009

This is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.

Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.

Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration

View 9 Replies View Related

Fedora :: F15 Does Not Work Well In Machine After Nvidia Drivers Are Installed?

Jun 17, 2011

Today I finally could install Fedora 15 i686 in my now aging (2005) desktop computer (although I will always think of it as my "new machine", as long as I don't assemble a new one for me):

AMD Sempron 3100+ (1.8GHz)
1GB DDR400
120GB HDD
NVIDIA GeForce FX5200 (128MB)

After I installed F15 my initialpression was that it worked really good on that hardware: everything went fine with GNOME 3 for example,except for some lags in graphics rendering, which I thought would be solved after the graphics card's full power were unleashed with the proprietary NVIDIA driver.For starters I am not sure which Nvidia driver is right for my card (Nvidia 173.X or the regularvidia).I managed to get "working" the 173.X driver but the desktop is even less responsive to begin with, and there appears to be a lot of activity on the hard disk side.So, my question is, which could be causing the performance loss?

A. The "small" RAM.
B. The vintage graphics card.
C. Some problem in the hard drive.
D. A known bug.

View 3 Replies View Related

Ubuntu Installation :: How To Install Nvidia Drivers For Nvidia 8800 GT Video Card

Apr 3, 2011

I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal

1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..

2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"

3.) Stuck don't know what to do.

View 4 Replies View Related

Fedora Installation :: 11 - Can't Get The Nvidia Legacy Drivers Running

Oct 3, 2009

I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:

Quote:

and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:

Quote:

FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device

and some warnings from the module that 185.18.36 doesn't support my CPU.

My video card is:

Quote:

Try to figure this out for two days now. Rpmfusion is really frustrating for me

Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.

View 6 Replies View Related

Fedora :: NVidia Drivers Installed - Graphics Errors Using Firefox

May 6, 2011

Sometimes, in Firefox, after looking a video and closing the corresponding tab, a still picture of the video appears in other tabs, even in some other applications than Firefox (e.g. Terminal). I've installed the nvidia drivers on Fedora 14. They seem to work properly.

View 1 Replies View Related

Fedora :: Uninstall Nvidia Drivers (kmod-nvidia)?

Mar 12, 2010

I've tried to install nvidia drivers using this commands:

Quote:

yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig

After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.

My GPU is nvidia gtx 280:

Quote:

[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)

My kernel is:
2.6.32.9-70.fc12.i686

View 4 Replies View Related

Ubuntu :: Install The Nvidia Drivers From Nvidia Website?

Dec 12, 2010

I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?

View 5 Replies View Related

Ubuntu :: Installed The Nvidia 185 Drivers And It's Not Recognizing Monitor As A Flat Panel Lcd?

Mar 10, 2010

i have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768

i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)

View 1 Replies View Related

Fedora :: Installed Kmod-nvidia Akmod-nvidia - Visual Lag

Nov 28, 2010

I Have just formatted to Fedora 14 64bit and installed kmod-nvidia akmod-nvidia and am experiencing visual lag. The lag did not occur before I installed the drivers, neither did it occur on Fedora 13 with drivers installed.

I have a priitty high spec pc with the nvidia 260 gtx.


just remove xorg-x11-drv-nvidia-libs-260.19.12-3.fc14.i686

so now:

View 1 Replies View Related

Ubuntu :: Flash Video Stutters - Running Without The NVidia Graphics Drivers?

Jun 8, 2011

First off, I'll come clean and admit that I am still relatively green to Linux, but I'm not afraid to tackle the complex. I have a few stroke-inducing issues that I haven't been able to resolve as a usually do by eye-grepping Google and the various forums. Of course, I'm running Ubuntu 11.04 with Unity - which is fairly new and undiscovered country.

I've got this no-name brand, sample laptop from a manufacturing partner of ours out of Shenzhen China. It's rocking a Core i3 M350 with an nVidia GT 330M (discreet-ish?)& apparently some flavor of Intel integrated graphics.

Now, there are so many variables at play, I'm not quite sure where to begin - so please bear with this post a bit longer as I unravel the details. Loading the nVidia drivers (both proprietary and the experimental open varieties) results in Unity no longer working and dumping me back to the classic Ubuntu desktop. I believe it has something to do with the fact that I have no ability to disable the integrated graphics through the BIOS and Ubuntu has set its hopes and dreams upon using Intel graphics for the rest of all time.

That said, running without the nVidia graphics drivers, I am able to use Unity and it runs pretty well.The only caveat being that on occasion (read: intermittently), when the laptop wakes up from suspend/hibernate mode, playing Flash video in full screen gets choppy (stutters). Restarting Ubuntu resolves the issue. I suppose I should verify that I am using Firefox 4.

In addition, there are times that the WiFi adapter will not wake, and using the keyboard function key to power cycle it ceases to function. A complete shutdown is required to address this one. i.e. Restarting and warm-booting does not fix it.

Did I mention Skype is a terd? I don't actually expect a fix for this pile of hot mess - just thought it might make someone laugh. If there is anyone here that could lend me a hand with any or all of these issues, not only will you have the satisfaction of knowing that you are one bad Mambajamba (TM), but I'll buy you a drink or something via Dwolla or bitcoin.

View 2 Replies View Related

Ubuntu :: Desktop Computer Boots Into Text Mode After Nvidia Drivers Installed

Jan 12, 2011

After installing ubuntu 64 bit, I installed all my updates and installed the current nvidia driver for my 9800 GTX+ from the additional drivers page. After restarting my computer, ubuntu boots into text mode. I used google and found out a couple of commands like:

After i hit control+alt+f7 it hangs on checking battery state with NO ok to the right of it. after running sudo apt-get --purge remove nvidia -current and restarting the computer, the boot hangs on the ubuntu screen everytime.

My specs are:
Core i7 860
4 GB of ram
Nvidia 9800 GTX+

View 9 Replies View Related

CentOS 5 :: Can't Install Nvidia Drivers (Unable To Load The Kernel Module "nvidia.ko")?

Jul 28, 2009

So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686

If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from

[Code]...

View 5 Replies View Related

OpenSUSE Multimedia :: Nvidia Drivers For 11.3?

Jul 15, 2010

the url to the nividia drivers for 11.3. They are not yet in the community repos.

View 9 Replies View Related

OpenSUSE :: How To Switch From Nouveau To NVidia Drivers

Aug 4, 2010

After installing 11.3, I realised that my graphic driver is not working as desired. I have a Compaq CQ60-430SA laptop with an NVIDIA 8200M graphics card. Earlier with 11.2, I had some proprietary NVidia drivers and my graphics were smooth. However, I am not getting the same performance with Nouveau...

As can be seen from the screen clipping below, the images especially in the preview mode and the icons look jarred (highlighted in red). I have no complains with the video but the images and icons do look shabby at times and therefore I want to switch over to the proprietary NVidia drivers.

[URL]

View 4 Replies View Related

OpenSUSE Hardware :: How To Install The Nvidia Drivers

Feb 7, 2010

I need to install the latest drivers for my Nvidia card. I have the Quadro FX 1800.I don't think the Nvidia One click installation will work with this card.I downloaded the drivers from Nvidia and tried to install them but their directions are very confusing. It says "exit x windows" and "restart in init 3". I don't know what that means.Can someone tell me step-by-step how to compile and install the nvidia drivers?I have opensuse 11.2 64-bit clean install with all the defaults, and the Quadro FX 1800.

View 6 Replies View Related

OpenSUSE Hardware :: Install Nvidia Drivers For 11.2 64-bit?

Apr 3, 2010

I am running openSUSE 11.2 64-bit KDE version. I would like to install drivers for my Nvidia GTX 285 1gb video card. How exactly would I do this?

View 2 Replies View Related

OpenSUSE Hardware :: Prompted To Use The NVidia Drivers?

Jul 15, 2010

Just got openSuSE 11.3 installed on my system and so far I like it better than my previous distro (Xubuntu).However, under YaST, it's showing a Vendor Driver CD, which I think might be for my nVidia chipset on my Zotac ION motherboard. How do I enable full graphics support for my system?

I Xubuntu, it automatically picked it up and prompted me to use the nVidia drivers. It also added the nVidia PPA to the Software Sources. Does openSuSE have anything like this?

View 5 Replies View Related

OpenSUSE Hardware :: INSTALLATION About Nvidia Drivers

Jul 23, 2010

To install the proprietary drivers must be change before the grub?

SDB:NVIDIA drivers - openSUSE

I do not understand where I put the option nomodeset

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved