I'm using OpenSUSE 11.4, trying to install to an iSCSI partition. I'm using gPXE to boot to my iSCSI volume. This works fine, and pulls up grub with my boot options. I think boot the openSUSE 11.4 entry, which kicks off the boot process. I see the steps for running DHCP on the interface, but when it gets to iscsiadm, there's an error logging in to the iSCSI target portal along the lines of "15 - already exists. After that things start to fall apart - I/O errors, mainly, and the system completely fails to boot. What's going on and what this already exists message means?
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
OS 11.2. When I try to log in my account I get the message {kstartupconfig4 does not exist or fails. The error code is 1. check}. I can only log in as root. As root, I check the file system and my files are there in /home/Myname. I can run all my programmes. The executable kstartupconfig4 is there.
I just fresh installed openSuse 11.3. Am trying to install Hupervisor and Tools but during the install I get the message that xen itself can't be installed while it needs 20MB space.My boot partition is already maxed. At least that is what the partitioner is telling me that 70MB is the maximum setting.
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
I have an Intel NIC supporting iSCSI boot.I successfully installed Karmic Server 64-bit on the iSCSI target.But it won't boot from it.It looks like it can't mount the iSCSI target:
Code: Gave up waiting for root device. Common problems: ... and it drops me to a BusyBox shell.
I want to stop using Windows because it sucks so i have downloaded all kind of distibutions from Linux. They give all the same error because it seems Linux has problems with Fakeraid. Now i have running OpenSuse in VmWare 7.0.1 but i want it as the only OS.
The installation goes fine but in the end it gives a Grub error because it cannot create the bootloader. It seems to be a common problem and i have done all the steps that i could find on Google.
I have two raid controllers. One is integrated in the mainboard from Asrock ALiveNF7G-HD720p R5.0 and OpenSuse sees it as a Jmicron controller.I have bought also a EM2001 2 Poorts PCI Controller SATA card with two harddisks in Raid 0 because Linux failed to install on the JMicron. On the EM2001 2 Poorts PCI Controller SATA it also fails with the same error.
I want OpenSuse 11.2 working on Raid 0. I know it must be some simple commands in the terminal through a live cd to correct the bootloader and do it manualy by Linux users but i'm a Windows user.
Can somewhone please tell me the exact steps and commands to install Linux on Raid 0 Fakeraid?
I am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.
I dual booted ubuntu with vista a while back, but I was running out of space on both partitions. So I thought I'd install ubuntu on another slightly smaller HDD from an old laptop. I thought all the ubuntu and grub stuff were on that one partition, so I thought if I just deleted it, all would be good. I isn't. Now when I boot up, I get a message saying 'Error, no such partition exists' and then 'Grub rescue:' and an input. So what I want now, is well, basically to be able to boot windows. I'm guessing I either have to remove grub, or just make it forget I ever had Ubuntu.
When I run ddclient with an existing ddclient.cache file I get errors saying "uninitialized value" and the remote IP address does not get updated. This pretty much renders ddclient useless. If I delete the cache file then things work fine and the IP address *does* get updated (if need be). I happen to be running version 3.7.3 of ddclient but I've tried this with ddclient 3.8.0 and the result is exactly the same except that the line number in the error changes to line 2030.
Here's the code at that line number :
Code: if ($config{$host}{'login'} eq '') { warning("null login name specified for host %s.", $host); I'm running ubuntu ( 9.04 I think ) and using zoneedit.com for dynamic dns. Here's a transcript showing the problem. root@ruby:/var/cache/ddclient# ddclient
I have never done this before but stood up a new Debian (testing) x64 system. It only has 146GB available for RAID1 so I created a 500GB iSCSI LUN on my NAS device on the network and am really confused how I can attach my Debian to the iSCSI LUN I created. Right now the OS is installed all locally on the machine but I would like the iSCSI LUN to be the /home directory for mail storage. Is this possible or do I need to mount the LUN to a newly created folder / mount point that is locally attached?
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory bash: ./etc/sysconfig/chron : cannot execute binary file X_MOUSE_CURSOR : Undefined variable
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
I'm only partially new to Linux. I'm running Fedora 11. I've just set up two machines, I thought to be identical. Evidently I missed something. I had some problems getting the network started on the second machine, and I must have forgotten a name change somewhere. Anyway, after doing lot's of comparisons between the boxes, editing and renaming and re-linking the ifcfg-GigaStorey file, they are both functioning. The problem is that whenever I start or restart the network on box 2, it reports the following error:
Bringing up interface GigaStorey: RTNETLINK answers: File exists Error adding address 192.168.1.6 for eth0. [ OK ] The file ifcfg-GigaStorey is linked in the following directories /etc/sysconfig/network-scripts /etc/sysconfig/networking/devices code....
Like I said, it's not super critical, just annoying. The networking comes up ok, but the error is puzzling. I figure if I learn what this problem is I'll be one step closer to my Linux beanee.
Trying to get an OpenSuse Live KDE to boot from a USB Key and I'm getting error 17 messages. I get no Grub boot screen or access to any of the grub functions so I'm stuck. BIOS has been changed to allow booting from USB so no issue there. If I remove the USB key and boot from HDD I have no problems dual booting either Linux or Windows using Grub.
After configuring the iscsi service, the symbolic link iscsi under the /dev folder is not created when the iscsi service is started.
Created the following UNIX shell script /etc/udev/scripts/iscsidev.sh on iscsi client node: .............................................. #!/bin/sh # FILE: /etc/udev/scripts/iscsidev.sh
I upgraded to OpenSuse 11.4, and I am getting the following error message on boot:fsck.ext3 -a -c0 /dev/sdb2Bad magic number in super-block while trying to open /dev/sdb2The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid andreally contains an ext2 filesystem (and not swap or ufs or something else), then superblock is corrupt and might try running e2fsck with an alternate superblock:
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb d: 150 gb e: 150 gb f: 100 gb g: 50 gb and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
Upgraded from 11.1 to 11.2 using GUI (YaST and Wagon)
Machine stops on boot and says:
fsck failed. Please repair manually and reboot. The root file system is currently mounted read-only. To remount it read-write do: bash# mount -n -o remount, rw /
Attention: Only CONTROL-D will reboot the system in this maintenance mode. shutdown or reboot will not work.
I am trying to install from the iso image that a burned to cd, but while loading it comes up with an error. Eventually it says no repository found. I am not sure why this is happening.
I have updated opensuse 11.3 via yast and after reboot I got this errorerror: file not found.error: you need to load kernel first.Press any Key to continue.
I resized my windows c drive to make another drive which also has Open SUSE 11.4 dual booting which was working fine.
After reboot I get missing operating system so I boot the live Opensuse DVD and the windows and Linux is still there so I tried the boot configure tool in YAST but get the error because of partitioning the boot loader cannot be installed properly
Can I make a boot floppy somehow? I now have a grub menu when it boot sup but do not know what to do now
Using 11.4 I noticed a couple of messages I have not seen before:-
Code: <5>[ 14.485094] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it <5>[ 14.485098] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
My machine is a TP T42 but should I try and od anything about this message or just ignore it?
