OpenSUSE Install :: 128 Gb Boot Error / Installation Froze At 92% And After The Laptop Wouldn't Boot?
Nov 23, 2010
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
View 9 Replies
ADVERTISEMENT
Jan 14, 2011
I used a cd version of ubuntu 10.4 but my laptop wouldn't boot.I thought of installing the previous version of ubuntu and then upgrade it.I used ubuntu 9 and it worked perfectly. But when the upgrade finished and my pc restarted it showed this message [1.007098] Disabling IRQ#4
View 7 Replies
View Related
May 28, 2010
I have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies
View Related
May 9, 2011
I got wireless printing working on my mom's computer... Then when I upgraded the laptop to 11.04 it wouldn't boot properly. It shows the Ubuntu splash and then switches to a console where I can see services starting and stopping. It freezes when it's going through this section of startup. I rebooted and started the machine in recovery mode, then selected low-graphics from the list. It works in low-graphics mode in Ubuntu Classic (my mom doesn't want Unity so I set Classic as the default)
View 5 Replies
View Related
Sep 4, 2010
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
View 4 Replies
View Related
Nov 4, 2010
- Im using 3 different USB keys, a 1gb, another 1gb, and a 4gb, the 4gb being the newest, and one of the 1gb might be early usb2.0.
- My motherboard has options in the bios for both USB HDD and FDD, and even USB ZIP drives. I set the boot order to USB FDD, then USB HDD, then HDD.
- I am trying to get Damn Small Linux 4.4.9 to work.
- When the screen after the motherboard logo is loading, it recognizes both my USB HDD and the FDD, displaying both names for each, and their capacity. But it just then skips to the dual boot options for my 160GB OS HDD.
- Legacy USB is enabled
- I'm using the actual ports on the mother board, not the front pannel ports.
View 1 Replies
View Related
Feb 21, 2011
Yesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
View 3 Replies
View Related
Jul 11, 2010
I've spent a frustrating afternoon trying to install Xubuntu 10.04 x64. I had already installed Win7 Pro 64, and have been attempting to install on a separate hard drive. It wouldn't even boot into Xubuntu install. Figured a bad burn on the Cd so I reburned the image I had down loaded using Ktorrent. It wouldn't boot either. I swapped out the DVD burner. Still no go. Redownloaded using Ktorrent including the torrent. Wouldn't boot into the installer.
I did a fresh burn. Still it wouldn't boot to the installer. I then downloaded Xubuntu again but from a mirror and not using Ktorrent. Good MD5SUM. Burned it again on another computer. Still wouldn't boot into the installer. I burned a copy of Kubuntu 10.04 x64 and it installed with no difficulty. I've installed Xubuntu 10.04 x86 several times on other computers win no difficulty. But I have 8 Gb of RAM on this machine and want to use Xubuntu 64.
View 2 Replies
View Related
Feb 18, 2010
I tried to boot from CD for demo mode (9.10) but my XP machine wouldn't do it. I opened CD from My Computer and a selection window opened. Choices were to reboot to demo, Install to Windows or Help with Boot. I selected Help with Boot and a boot program was downloaded and installed (I think to drive C: (XP)). When I restarted, a new boot window opened giving me a choice to boot to XP or Ubuntu (9.10) and I chose Ubuntu. Instead of opening for demo it went to full install and I aborted the procedure, went to add/remove programs and uninstalled Ubuntu. Now when I restart I still get the boot selection window, Any suggestions as how to remove the boot program? Can't find it.
View 2 Replies
View Related
May 18, 2010
Yesterday I used gparted to shrink win xp partition and to expand opensuse. When I try to reboot my laptop it doesn't boot anything, and it doesn't dislay on the screen anything like missing grub, grub rescue. I have opensuse 11.1 gnome on acer 5920g
View 5 Replies
View Related
Jul 26, 2011
A few weeks ago I installed Fedora Linux 64-bit on my HP dv4-1428ca laptop which was running Windows 7. At that time I created a Live USB using the fedora-live usb tool and it booted fine. A couple days ago I decided to try out openSUSE, so I downloaded the 64-bit live-cd image and tried to create a live usb using the SUSEStudio ImageWrite provided in the documentation. The tool kept giving me an error message, so I decided to try unetbootin instead. However, when I tried to boot the live usb on my HP laptop, it presented me with the message.
"SYSLINUX 4.04 EDD 2011-04-18 COPYRIGHT (C) 1994-2011 H. PETER ANVIN ET AL" with a blinking cursor and nothing else. I've tried a variety of alternative programs for creating live USB's (pendrivelinux, linux live usb creator, unebootin), and verified the checksum of the iso file for openSUSE 11.4 64-bit, and still was not able to get past the "SYSLINUX..." message on my HP laptop. However, the live USB does boot on the other computers in my house. Interestingly, if I create a live USB using the tool provided by Fedora, it will boot fine. However the Fedora Live USB tool cannot be used for other distros.
Specs:
AMD Turion X2 Dual Core
4GB Ram
ATI Radeon 3200 Graphics
320 GB Hard Drive
View 3 Replies
View Related
Jun 22, 2011
I've been running Ubuntu on my Acer 5100 laptop for about a year and a half. The latest version I had was 10.10 when my disk crashed and burned and had to be replaced. This was an external hard drive as my internal one died long ago and I'm too lazy to replace it. So things were fine until the crash. Bought a new hard drive today (same brand and model as the one the system was installed on before), downloaded 10.10 and installation goes fine. Then, in the end, I am told 'you need to reboot in order to use your new system'. So I say yes and the system ejects the CD-ROM and starts the shutdown process. Then it gets to doing something with the CD-ROM (/sr0) and it gets an IO error. Of course this is because the thing was ejected! So I get this loooong list of IO errors (all the same) on device sr0 and I have to manually reboot the system by the power button.
The system starts to come up, I see the BIOS hit the external drive, and nothing. It sits there with a blinking cursor at the top left of the screen and does nothing. Now, I've looked at a few things: 1: I've made sure the external drive is the first boot device. 2. I've made sure the disk was actually good and not damaged. 3. I've made sure the ISO I downloaded has the same hash as the one I got I've even tried the install on ANOTHER drive and the same thing happens! I know 10.10 can run on this system as it HAS in the past with no problems at all.
View 4 Replies
View Related
Jul 26, 2011
I have tried 11.04 and 10.10 64 bit and after I install the OS my laptop will not boot. The install goes great after being booted from a USB but after the install when it tries to boot from the HDD all that happens is the screen lights up and goes dark repeatedly.
View 3 Replies
View Related
Mar 29, 2011
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
View 1 Replies
View Related
Mar 13, 2010
I would like to create a dual boot Opensuse/Vista laptop. My problem is I do not have a DVD-RW drive, and I am not that good with creating a bootable USB stick. I have read some of the installation guides offered here and attempted to install Opensuse via my USB stick without success. My question is there a setup.exe download offered for Vista users who would like to create a dual boot laptops? I have an 8Gb USB stick that was made "bootable" via some other forums, and I have downloaded the DVD ISO image of Opensuse 11.2 to my desktop.
View 5 Replies
View Related
Mar 16, 2011
I am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.
Key board has no issue as I can use it in Windows.
I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.
I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.
How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.
View 1 Replies
View Related
Apr 7, 2010
My laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies
View Related
Mar 15, 2010
I would like to try to reinstall a barebones xp on a compac laptop as a dual boot with 11.1. I repartitioned using gparted so I now have 20 Gb free. Here (I hope) is the output of fdisk -lu [URL] I spent a lot of time setting up opensuse and don't want to lose the settings, etc. Should I repartition with the 20G space "in front" of the linux partitions? Can I back up the linux settings so I can reinstall them if I lose everything? Is there a sort of windows emulator (wine?) that will run programs that won't run on opensuse, like netflix, tax prep software, etc? Too many questions I know but I would like a fairly simple foolproof fix if possible.
View 9 Replies
View Related
May 22, 2010
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
View 9 Replies
View Related
May 8, 2010
I have a new laptop that I can install ubuntu on without hassle using a cd. I wanted to put it on my older Toshiba laptop (2003) for my little cousin to use to get on the internet and play games. When I boot from the CD the ubuntu logo comes up runs. It ask me my language then goes to the screen where I can choose "Try Ubuntu without installing it" "Install Ubuntu Now" etc. Ive tried clicking both install and try both launch the ubuntu logo it runs for about 4 min and then hangs on a black screen. I know it isn't the cd because I can use it on any other computer and it works. This Toshiba cannot boot from a jump drive though so that choice is out.
View 3 Replies
View Related
Oct 11, 2010
Installing Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
View 3 Replies
View Related
Dec 20, 2009
This is not strictly a Linux question, although I am interested in any Linux cautions as to what to avoid that could impact my Linux on the computer in question. I have Linux (openSUSE-11.1) setup on dual boot with MS-Vista on a Dell Studio 1537 laptop. My wife is "fed up" with Vista, and has asked that I replace Vista with WinXP on this Laptop. I would like to do this over the Christmas holiday break. The laptop's 1 year support warrantee has expired. can someone explain to me the function of the two Dell /dev/sda1 and /dev/sda2 partitions ?
This laptop was purchased with MS Vista installed, with 3 primary partitions (small /dev/sda1 (called "Dell Utility" ),10GB /dev/sda2 (unknown - appears to be some sort of Dell backup/recovery partition ? ), /dev/sda3 (MS Vista which had the remainder of the 250GB drive, although I have subsequently reduced this to 69GB ).
Again, I note /dev/sda3 is the 69GB MS Vista partition (I reduced it to 69GB when I installed Linux (openSUSE-11.1)). I also believe it may be in /dev/sda3 where I should plan on installing winXP. Currently I have openSUSE-11.1 Linux in /dev/sda4 (divided into extended partitions, with /dev/sda5 (swap), /dev/sda6 (root), and /dev/sda7 (/home) for Linux and it works well. I plan to keep openSUSE-11.1 Linux when Vista is replaced by WinXP Can I remove and merge /dev/sda1, /dev/sda2, and /dev/sda3 and replace them with one partition for WinXP ?
Or am I better OFF keeping /sdev/sda1 (Dell Utility) ? and am I better off to keep /dev/sda2 (some sort of Vista ?? recovery) ? and only put winXP on /dev/sda3 ? Aside from the MBR with Grub being destroyed (when I replace Vista with winXP) is there anything else I need to be careful of wrt keeping my openSUSE-11.1 Linux install on this laptop ?
I've also sent a slightly different version of this post as a question to the Dell Support mailing list. p.s. for information, here is some output from Linux commands showing the contents:
[Code]....
View 2 Replies
View Related
Aug 23, 2010
1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
View 9 Replies
View Related
Jul 11, 2010
My computer froze and I had to do a hard reboot and now when I try to boot into Ubuntu the grub menu comes up and I choose my kernel but then I just get a blinking cursor. I can't even get into recovery mode!
View 2 Replies
View Related
Mar 2, 2010
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
View 4 Replies
View Related
Feb 20, 2011
Trying to get an OpenSuse Live KDE to boot from a USB Key and I'm getting error 17 messages. I get no Grub boot screen or access to any of the grub functions so I'm stuck. BIOS has been changed to allow booting from USB so no issue there. If I remove the USB key and boot from HDD I have no problems dual booting either Linux or Windows using Grub.
View 3 Replies
View Related
Apr 17, 2011
My system just froze while I was browsing, never had it happen before so I was quite shocked, anyway just restarted it and now it wont boot. Got all my school work on there so now Im stressing.
This is what comes up:
Gave up waiting for root devices. Common problems:
What can I do to recover this as I was stupid enough not to back up my school work?
View 9 Replies
View Related
Dec 28, 2010
Background information: The hardware is an iMac. I had Ubuntu 10.10 and Mac OS X.... Something. That part doesn't matter. The Mac OS is still working....
So... I had everything set up, and I was happy to start my life getting used to Linux and learning all about a new operating system and how to use it and whatnot. I wanted to change my username, though, because when I was setting up my account, I didn't have a mouse and weird things were happening when I tried to change my username at the time. So I looked up on the internet (a very wonderful thing) how to change my username. I found that it required root access. I knew that I shouldn't have tried it because I was, and still am, so inexperienced. Then I went against my better judgement and f'ed up the system. Happy days, right? I couldn't do anything on Ubuntu anymore at that point. I had kind of wanted to do a clean install of Ubuntu at that point anyway, so that's what I decided to do. The mistake came when I decided to try to do it on my own instead of using the wonderful invention that is the internet to figure it out. So I went onto my Mac OS to erase the partitions I was using for Linux. So everything was fine until I tried to boot from my USB to reinstall Ubuntu. It keeps taking me to the command line that says "error: unknown filesystem. [return] grub rescue>" The exact same thing happens when I try to boot from the hard drive. I was really curious why it's not actually booting anything from the USB drive, because I shouldn't need the hard drive to do that, correct? I tested the USB on my Windows netbook, and it worked as it was supposed to work. I was able to try Ubuntu just fine. Then I put Ubuntu 10.04 on my flash drive. It also wouldn't boot on my Mac. Does anybody have any advice for how to get Linux working on my Mac again? I'm really sick of Mac OS and would prefer using Linux.
View 14 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Jul 4, 2011
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
View 3 Replies
View Related
