After upgrading to 11.2 my laptop HP dv9000 I'm getting some errors:
ACPI Error (psargs-0359): [2012] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007fbf45f0), AE_NOT_FOUND
When I run OpenSUSE from the Live CD using normal settings, booting stops with a blank screen a moment after the kernel is loaded. When running it with ACPI disabled, it works, but direct rendering is disabled, even though it detects my video card (Mobility Radeon HD 5650) correctly Here's the Xorg.0.log file: my xorg log - [URL]
View 3 Replies View RelatedMy openSuse install can't boot/login with ACPI enabled. I disabled ACPI and have been using it for a while, but would like to get ACPI working.
When I did the install from the livecd it would hang when loading the kernel. I would see the progress indicator get to 99% and then my computer froze. I disabled ACPI from the options and was able to install.
But I never got any error messages or any other output so I don't know what module was causing the problem when being loaded.
I have an old laptop (asus M6 ca. 6 year old) with dual boot linux windows. Untill Saturday linux=suse 11.0, Saturday I have made an upgrade to opensuse11.4.
I have boot up/down many times almot everything was working properly except the battery status ... I have thought .. "I'll think about it later".
Then out of the blue on sunday my laptop does not boot anymore, the boot hangs. I then have realized taht the failsafe boot was working properly.... ok I have remembered the wrong battery signal and tried the normal boot + acpi=off .. and .. it boots!
OK, the acpi is the problem. I have never made an update of my BIOS (this means it is now old), but I do not really want to update it now. with suse 11.0 the acpi was working properly, I have never have touched the acpi boot option and I had all acpi functionality working (battery, suspend .. etc)
how to let acpi work (at least for the main features .. batetry, fan speed, HT ... etc)?
It can be that the old kernel boot was using some "specific flags", (an installation is cleverer than an upgrade ..?!?!) but unfortunatelly it looks to me that nothing has remained from the old installation .. so I do not know ...
I just installed Fedora 12. When I boot, only the following three lines are printed: pnp 00:09: can't evaluate _CRS: 12298 ACPI: Expecting a [Reference] package element, found type 0 Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) I first installed Fedora using a RAID 1 setup that mirrored each partition, so I thought the problem was coming from GRUB and confusion from what to boot off of. However, I reinstalled Fedora using a simple single drive setup (left the second drive without any partition), and the same error was returned. Is this an ACPI issue with this particular motherboard/BIOS? Any ideas for how I can fix this?
View 1 Replies View RelatedI have tried both DVD and CD (both are MD5-checked) of both Lenny 5.0.8 and Squeeze RC on my HP DV7-3074CA. (a.k.a 3085DX)When I choose a graphic install, it just hangs after loading the initial files.When I choose the normal install, It gives the following error:
[1.383207] ACPI: EC: Input buffer is not empty, aborting transaction.
Is there a boot command I can input to override this? I tried removing the battery slot, but the only difference is that that message does not appear, but the setup hangs anyway.
UPDATING:Tried "pci=noacpi" but that did lead to a kernel panic.[1.547564] Kernel panic - not syncing: Attempted to kill init!
I am renting a dedicated server and I'm following a tutorial to install rutorrent. I'm asked to:
sudo apt-get install -y build-essential pkg-config libcurl4-openssl-dev libsigc++-2.0-dev libncurses5-dev lighttpd nano screen subversion libterm-readline-gnu-perl php5-cgi apache2-utils
But continually get this error ...
sudo apt-get install -y build-essential pkg-config libcurl4-openssl-dev libsigc++-2.0-dev libncurses5-dev lighttpd nano screen subversion libterm-readline-gnu-perl php5-cgi apache2-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version.
pkg-config is already the newest version.
libcurl4-openssl-dev is already the newest version.
libsigc++-2.0-dev is already the newest version.
libncurses5-dev is already the newest version.
lighttpd is already the newest version.
nano is already the newest version.
screen is already the newest version.
subversion is already the newest version.
libterm-readline-gnu-perl is already the newest version.
php5-cgi is already the newest version.
apache2-utils is already the newest version.
The following packages were automatically installed and are no longer required:
xserver-xorg-video-amd linux-headers-2.6.24-16-generic
linux-headers-2.6.24-16
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up acpid (1.0.4-5ubuntu9.3) ...
* Starting ACPI services...
acpid: can't open /proc/acpi/event: No such file or directory
invoke-rc.d: initscript acpid, action "start" failed.
dpkg: error processing acpid (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of acpi-support:
acpi-support depends on acpid (>= 1.0.4-1ubuntu4); however:
Package acpid is not configured yet.
dpkg: error processing acpi-support (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
acpid
acpi-support
E: Sub-process /usr/bin/dpkg returned an error code (1)
I have followed ideas posted in different threads for this problem but none have worked. I'm new to linux so here comes the dumb questions. What is acpid and what problems will it cause if ignored?
(Opensuse 11.4, nvidia, core2) PROBLEM: cpu goes into C3 powersaving state even on full load (even when disabled from bios) (acpi=off prevents this). opensuse 11.4 kernel ignores boot option processor.max_cstate=2 (option has no effect). cpufreq util should be able to change governor policy to performance, however acpi-cpufreq driver doesn't load: modprobe acpi-cpufreq -> FATAL: error inserting acpi_cpufreq (/lib.../acpi-cpufreq.ko): No such device
View 7 Replies View Relatedi am trying to install the new openSUSE 11.3 version but i can't install it without setting the ACPI mode to OFF. Is the new kernel support this hardware? (Toshiba Satellite A505-s6033) i had this problem already with Ubuntu 10.4 LTS and i had have to recompile the kernel with this patch: Some buggy BIOS may modify DSDT memory when acpi enabled. So we copy DSDT for safe.
I thought the 2.6.34 kernel already have this patch but it seems i was wrong... So if i will install the system with ACPI on OFF mode i will be need to recompile the kernel with this patch to get things working?
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
Having trouble rebooting a system. Have a Ubuntu 9.10 (2.6.31-16 generic-pae) build on a VMWare installation. The system was fine until I rebooted after an update. Now I get the above message and the system halts loading. Have tried to Grub acpi=off and acpi=force to no avail.
View 1 Replies View RelatedI set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
Trying to get an OpenSuse Live KDE to boot from a USB Key and I'm getting error 17 messages. I get no Grub boot screen or access to any of the grub functions so I'm stuck. BIOS has been changed to allow booting from USB so no issue there. If I remove the USB key and boot from HDD I have no problems dual booting either Linux or Windows using Grub.
View 3 Replies View Relatedi have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I upgraded to OpenSuse 11.4, and I am getting the following error message on boot:fsck.ext3 -a -c0 /dev/sdb2Bad magic number in super-block while trying to open /dev/sdb2The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid andreally contains an ext2 filesystem (and not swap or ufs or something else), then superblock is corrupt and might try running e2fsck with an alternate superblock:
e2fsck -b 183 <device>
fsck failed. Mounting root device read only.
mounting root /dev/sdb2
[code]....
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
Upgraded from 11.1 to 11.2 using GUI (YaST and Wagon)
Machine stops on boot and says:
fsck failed. Please repair manually and reboot. The root file system is currently mounted read-only. To remount it read-write do: bash# mount -n -o remount, rw /
Attention: Only CONTROL-D will reboot the system in this maintenance mode. shutdown or reboot will not work.
Give root password for login:
I write: mount -n -o remount,rw /
And then reboot with CONTROL-D.
I am trying to install from the iso image that a burned to cd, but while loading it comes up with an error. Eventually it says no repository found. I am not sure why this is happening.
View 5 Replies View RelatedI have updated opensuse 11.3 via yast and after reboot I got this errorerror: file not found.error: you need to load kernel first.Press any Key to continue.
View 9 Replies View RelatedI resized my windows c drive to make another drive which also has Open SUSE 11.4 dual booting which was working fine.
After reboot I get missing operating system so I boot the live Opensuse DVD and the windows and Linux is still there so I tried the boot configure tool in YAST but get the error because of partitioning the boot loader cannot be installed properly
Can I make a boot floppy somehow? I now have a grub menu when it boot sup but do not know what to do now
Using 11.4 I noticed a couple of messages I have not seen before:-
Code:
<5>[ 14.485094] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
<5>[ 14.485098] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
My machine is a TP T42 but should I try and od anything about this message or just ignore it?
[Code]...
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
When I boot I get this error:
Starting CRON daemondone
Starting smartd done
Starting VirtualBox kernel moduledone
[code]....
Since i have bought a new monitor, i get a boot error (opensuse 11.2). It tells me "undefined video number 375".
Then I can choose between "enter" or "scan". When I choose "enter" everything works perfectly.
My hardware:
Monitor:
ViewSonicVX2260 (full hd) connected with a hdmi cable
Video card: ATI 4670hd
Files:
This is the "menu.lst" file:
The xorg.conf file:
I was running 11.0 and it stalled in the middle of a number of updates. On reboot I now get (if I remember correctly) Error 15: File not found.I managed to get my hands on a 11.0 live cd and started trying to fix grub. However, when I try mounting the harddrive using "mount /dev/sda1" I got
Code:
can`t find sda1 in /etc/fstab or /etc/mtab
"mount /dev/sda1 /mnt" gives
[code]...
I'm using openSUSE 11.4 KDE upgraded from 11.3. No nonstandard packages that I know of. I get this error messages on boot :
Code:
grzes@opensuse:/etc/init.d> sudo cat /var/log/boot.msg | grep '*ER*'
<3>[ 2.408570] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.665563] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.668069] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.668073] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
I was wondering why is this happening. I didn't get those on 11.3.Just to add my openSUSE boots normally and seems to work as expected. My graphics card/driver combo is :
Code:
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:1862]
Kernel driver in use: i915
I'm using OpenSUSE 11.4, trying to install to an iSCSI partition. I'm using gPXE to boot to my iSCSI volume. This works fine, and pulls up grub with my boot options. I think boot the openSUSE 11.4 entry, which kicks off the boot process. I see the steps for running DHCP on the interface, but when it gets to iscsiadm, there's an error logging in to the iSCSI target portal along the lines of "15 - already exists. After that things start to fall apart - I/O errors, mainly, and the system completely fails to boot. What's going on and what this already exists message means?
View 8 Replies View RelatedI have multi-version Kernels on a Dual Boot WinXP / openSUSE 11,3 box. It's been a LONG time since I needed to boot to Win XP and now that I find that I can't get to it, I can not say for sure what I did to break it. Looking back, I suspect that the method I used for the recent removal of one of the Kernel versions may have been innappropiate. Rather than unchecking in versions/package groups I may have just removed the unwanted kernel in the package list. Not sure. I've tried dinking around with menu.lst and Yast Boot Loader to no success. I get errors depending on what I messed with. Didn't try to reinstall grub until I checked here for help with a fix.
Here's some info:
Code:
I have a single boot system that was working great until this morning when it locked up. I was working as I always do when the system stopped responding completely. CTRL+F1 did not work to allow me into the back so I could log in and see what was happening.
CTRL+SHIFT+SysRq did not recover the system or interrupt what ever was causing the lock up.
SSH from another system failed as the client did not respond
So I had to do a hard boot and when I did I got this:
GRUB Loading stage1.5.
GRUB loading, please wait...
Error 17
Again this is a single boot system no Windows other than in VMWare inside the install. It is a multi drive with RAID set up workstation that I have at work. The short of it I am sole IT support as our companies ITS will not support Linux. In 5 years of operations with Linux at work this is my first issue, and I can't figure it out. I already tried the PartedMagic solution (ref = Re-Install Grub Quickly with Parted Magic) and that didn't work.
I re-installed the system completely even going to the extent to change my partition scheme just to make sure that wasn't the problem (which doesn't make sense as the system had been running for 46 days non-stop without a problem). Upon reboot after performing a complete security update I got the Error 17 message again.
Below is the output of fdisk -l
Code:
Welcome - Parted Magic (Linux 2.6.30.6-pmagic)
Most of the filesystem tools and partition programs featured by Parted Magic include man pages. To read a manual page, simply type man and the name of the tool. (Examples: 'man ntfsprogs' or 'man fdisk')
[Code].....
