OpenSUSE Install :: Error 11.2 On Raid 0 / EM2001 2 Poorts PCI Controller SATA Fails?
Mar 1, 2010
I want to stop using Windows because it sucks so i have downloaded all kind of distibutions from Linux. They give all the same error because it seems Linux has problems with Fakeraid. Now i have running OpenSuse in VmWare 7.0.1 but i want it as the only OS.
The installation goes fine but in the end it gives a Grub error because it cannot create the bootloader. It seems to be a common problem and i have done all the steps that i could find on Google.
I have two raid controllers. One is integrated in the mainboard from Asrock ALiveNF7G-HD720p R5.0 and OpenSuse sees it as a Jmicron controller.I have bought also a EM2001 2 Poorts PCI Controller SATA card with two harddisks in Raid 0 because Linux failed to install on the JMicron. On the EM2001 2 Poorts PCI Controller SATA it also fails with the same error.
I want OpenSuse 11.2 working on Raid 0. I know it must be some simple commands in the terminal through a live cd to correct the bootloader and do it manualy by Linux users but i'm a Windows user.
Can somewhone please tell me the exact steps and commands to install Linux on Raid 0 Fakeraid?
View 4 Replies
ADVERTISEMENT
Mar 19, 2009
I'm working on a new server and it has an Nvidia SATA array controller with 2 250Gb SATA drives configured in a hardware array. When the first screen comes up I'm entering the option Linux DD for it to prompt me for the drivers but nothing ever happens. The screen says that it's loading a SATA driver for about 15 minutes and then the screen clears and has a plus sign cursor on a black screen. What am I doing wrong? The only driver that came with the HP server are for Redhat 4 and 5 and SUSE, will any of those actually work?
View 7 Replies
View Related
Jun 12, 2010
I bought a used server and it's in great working condition, but I've got a 2-part problem with the onboard raid controller. I don't have or use RAID and want to figure out how to stop or work around the onboard SATA raid controller. First some motherboard specs.: Arima HDAMA 40-CMO120-A800 [URL]... The 4-port integrated Serial ATA Integrated SiliconImage Sil3114 raid controller is the problem.
Problem 1: When I plug in my SATA server hard drive loaded with Slackware 12.2 and linux kernel 2.6.30.4, the onboard raid controller recognizes the one drive and allows the OS to boot. Slackware gets stuck looking for a raid array and stops at this point -........
View 11 Replies
View Related
Mar 12, 2010
I've recently started having an issue with an mdadm RAID 6 array that been operational for about 2500 hours.
Intermittently during write operations the array stalls, dropping to almost 0 write speed for 10-30 seconds. When this occur one or both of the 2 drives attached to a 2 port Silicon Image si3132 SATA-II controller "locks up" with its activity light locked on. This just started occurring within the last week and didn't seem to coincide with any update that i noticed. The array has just recently passed 12.5% full. The size of the write does not seem to make any difference and it seems completely random. Some times copying a 5 GB dataset results in no slow down other times a torrent downloading to the array at 50kb/sec does cause a slow down and vise versa.
The array consists of 8 WD 1.5TB drives, 6 attached to the ICH9R south bridge, and 2 attached to a si3132 based PCI express card. The array is formatted as a single ext4 partition.
Checking SMART data for all drives shows no errors. Testing read speed with hdparm reports what i would expect (100mb/sec for each drive, ~425mb/sec for the array).
The only thing i did notice is that udma6 is enabled for all the ICH9R drives while only udma5 is enabled for the si3132 drives. Write cache is enabled for all the disks. Attempting to set the si3132 drive to udma6 results in an IO error from hdparm.
The si3132 drive is using the sata_sil24 driver. Nothing of interest appears in the kern or syslog. During this time top shows very high wait time.
The s13132 controller appears to have the original firmware from 2006 loaded, there are some firmware updates available on the Silicon Image website for this controller that now appear to offer separate firmwares for RAID operation (some sort of hybrid controller/software thing the controller supports) and a separate firmware for standard IDE use.
Has anyone had similar issues with this controller? Is a firmware update a reasonable course of action? If so which firmware is best supported by the linux driver?
I know i'm not using its raid features but i've dealt with controllers that needed to be in raid mode for ahci to be active and for linux to work well with them. I'm bit ify at the idea of just trying it and finding out as it could knock 2 disks of my array out of action.
View 2 Replies
View Related
Feb 5, 2010
I forced my workplace to forgo windows and opt for linux for web and mail server. I'm setting up Centos 5.4 on it and I ran into a problem. The server machine is a HP Proliant DL120 G5 (quad core processor, 4GB Ram, two SATA drives, 150GB each attached to the hardware RAID Controller on board). RAID is enabled in the BIOS.I pop in the Centos disk and go through the installation process.
When I get to the stage where I partition my hard drive,it is showing one hard drive, not as traditional sda.but as mapper/ddf1_4035305a86a354a45.I looked around and figured that I need to give Centos the raid drivers. I downloaded it from:
[URL]
I follow the instructions and download the aarahci-1.4.17015-1.rhel5.i686.dd.gz file and unzipped it using gunzip. Then on another nix system, i do this:
dd if=aarahci-1.4.17015-1.rhel5.i686.dd of=/dev/sdb bs=1440k Note that I am using a usb floppy drive, hence the sdb. After that, during centos setup, i type: linux updates dd
It asks me where the driver is located. I tell it and the installation continues in the graphical mode. But I still get mapper/ddf1_4035305a86.a354a45 as my drive. I tried to continue to install centos on it. It was successfull but when i do a "df -h" it gives me /dev/mapper/ddf1_4035305a86......a354a45p1 as /boot
/dev/mapper/ddf1_4035305a86......a354a45p2 as /
/dev/mapper/ddf1_4035305a86......a354a45p3 as /var
/dev/mapper/ddf1_4035305a86......a354a45p4 as /external
/dev/mapper/ddf1_4035305a86......a354a45p5 as /swap
/dev/mapper/ddf1_4035305a86......a354a45p6 as /home
Well i know why it's giving these, because i set it up that way, but i was hoping it would somehow change to the normal /dev/sda, /dev/sdb. That means that the driver i provided did not work. I have another IBM server (5U) with raid scsi drive and it shows the usual /dev/sda. It also has hardware raid. So i know that there is something wrong with the /dev/mapper/ddf1_4035305a86......a354a45p1 format.
First, is there any way that I can put the aarahci-1.4.17015-1.rhel5.i686.dd (floppy image) on a CD?. I really need to set this up with raid. I know i could simply disable raid in bios and then i would get two normal hard drives sda and sdb. But it has to be a raid setup. Any way to slipstream the driver into the centos dvd? The hp link i provided above, under installation instructions, there are some instructions titled "Important". But I couldn't get it to work.
View 2 Replies
View Related
Aug 2, 2010
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
View 9 Replies
View Related
Jul 20, 2010
I cannot install 11.3 on a machine with an intel raid controller I have tried with raid 1 using the card and then setting the disks to individual raid 0 and letting suse raid them. With the card doing it the machines crashes as soon as it tries to boot the first time, with suse doing the raid I just get 'GRUB' on the screen It seems a lot of people are having similar problems, does any one have any pointers. 11.2 installs fine. I would try and do a bug report but every time I go to the page it's in Czech
View 4 Replies
View Related
Sep 17, 2010
I have a Dell Studio XPS running openSUSE 11.2 with dual mirrored disks (using Dell's SATA controller). Does anyone know how I can set up automatic monitoring of the disks so that I will be informed if either fail? I think smartd might be what I need here. Is that correct? I added:
/dev/sda -a -d sat -m <my email>
/dev/sda -a -d sat -m <my email>
smartd is running, but how do I know that it will report what I need? I also have a client with a Dell PowderEdge SC440 with SAS 5/iR also running openSUSE 11.2. They also require automatic monitoring. There doesn't seem to be a SAS directive for smartd. I notice that the newer release says it does support SAS disk. I upgraded to 5.39. On restart (with DEVICESCAN as the directive) I get the following in /var/log/messages for my SAS RAID disk.
Sep 18 10:47:26 harmony-server smartd[25234]: Device: /dev/sdb, Bad IEC (SMART) mode page, err=4, skip device
I ran:
smartctl -a /dev/sdb
and got the result:
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, smartmontools
Device: Dell VIRTUAL DISK Version: 1028
Device type: disk
Local Time is: Sat Sep 18 11:32:08 2010 JST
Device does not support SMART
Error Counter logging not supported
Device does not support Self Test logging
Is there some other tool/package that does support DELL virtual disks?
View 2 Replies
View Related
Jul 3, 2009
I wonder if this is a regression, I have seen info that this bug had been in the SB600 and worked around with 2.6.26:
Here's my lspci:
uname:
This is happening on three out of three SATA disks in the system and, even though I can't explain how, seems to have caused data loss on the mdraid they support.
It would be great if someone has a good idea on this one.
adding smartctl -a, just in case
After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
View 5 Replies
View Related
Nov 9, 2010
I've installed debian squeezy recently and for some reason I have problems with mounting /home partition during startup.
There's an error:Mounting local filesystems...mount: special device /dev/mapper/isw_bbfedcffgi_Volume0p6 does not exist. failed
I've tried using fsck - no result the file system is healthy, I've tried formatting it once again (fresh copy, no user data) and it's not working. What is more mounting the partition manually goes well - I can read the data and write to it. All other partitions are ok.
I have no idea what's going on and why mounting /home fails. I've written this post on Polish debian users forum, but no response - only to give more info, so I'll put it here also:
ls -al /dev/mapper
crw------- 1 root root 10, 59 Nov 9 19:34 control
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume0 -> ../dm-0
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume01 -> ../dm-2
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume05 -> ../dm-3
lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume06 -> ../dm-4
code....
View 2 Replies
View Related
May 10, 2009
I want to Install RHEL 4.7 64 bit on one my server (Supermicro Super Server) having RAID controller1. Intel2. AdaptecWe are using Adaptec.We are using RAID 1 with 2x320GB Hard disksPOINT: If we Install RHEL 5.3 it recognize RAID controller and show single Logical volume of 298 GB, Means working fine but when we try to install RHEL 4.7 it shows two hard disks of 298GB and 298GB,meanz its unable to recognize RAID controller.So, the issue is Driver of it, CD which we got from super micro having driver for RHEL 4 to RHEL 4 update 6We are making our DR site and its necessary for us to Install RHEL4.7 to make it identical.I searched a lot and spent more than three days on it continuously, And still unable to find the solution.
View 9 Replies
View Related
Sep 1, 2010
I need to add the LSI drivers for the 9750 RAID controller during the install. These drivers are not included in 10.04 (or 10.04.1) and I need to install onto the RAID device I've created. LSI provides the drivers and instructions here - [URL]
Here are my steps, with the drivers on a USB drive -
Code:
Boot from the installation CD and select Install Ubuntu Server.
Press CTRL+ALT+F2 to switch to console 2 while Ubuntu detects the network.
# mkdir /mnt2 /3ware
# mount /dev/sda1 /mnt2
NOTE: LSI drivers are at /dev/sda1, via USB
# cp /mnt2/9750-server.tgz /3ware
# cd /3ware ; tar zxvf 9750-server.tgz
# umount /mnt2
* Remove the USB flash before insmod command *
# insmod /3ware/2.6.32-21-generic/3w-sas.ko
Press CTRL+ALT+F1 to return to the installer. Continue the installation as usual. Do not reboot when the installation is complete. Press CTRL+ALT+F2 to switch to console 2 again.
# cp /3ware/2.6.32-21-server/3w-sas.ko /target/lib/modules/2.6.32-21-server/kernel/drivers/scsi
# chroot /target
# /sbin/depmod -a 2.6.32-21-server
# update-initramfs -u -v
# exit
Press CTRL+ALT+F1 to return to the installer. Reboot to complete the installation. There are no errors, but after I reboot I just get "GRUB" in the upper left corner, nothing else.
View 2 Replies
View Related
Oct 4, 2010
I am trying to install Centos onto a Poweredge 2650, with Dell Poweredge Expandable Raid Controller. I have 5 SCSI disks installed, and have created and initialised 2 logical volumes via the SCSI controller setup utility (Ctrl M after boot). After reboot the system reports two logical volumes present.
The Centos installer cannot find any disks when it gets to the disk partitioning/setup step. It reports no disks present. Do I need a specific driver for this controller?
View 2 Replies
View Related
Aug 3, 2010
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
View 3 Replies
View Related
Jun 18, 2010
I want to create a file-server with Ubuntu and have two additional hard drives in a RAID 1 setup. Current Hardware: I purchased a RAID controller from [URL]... (Rosewill RC-201). I took an old machine with a 750GB hard drive (installed Ubuntu on this drive). I installed the Rosewill RAID card via PCI port. Connected two 1TB hard drives to the Rosewill raid card. Went into the RAID bios and configured it to RAID 1.
My Problem: When I boot into Ubuntu and go to the hard drive utility (I think that's what its called). I see the RAID controller present with two hard drives configured separately. I format and tried varies partition combination and at the end of the day I see two separate hard drives. Just for giggles, I also tried RAID 0 to see if they would combine the drives.
View 3 Replies
View Related
May 1, 2011
I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
View 4 Replies
View Related
Feb 15, 2009
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies
View Related
Jun 13, 2011
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
View 3 Replies
View Related
Sep 1, 2011
I have a computer and I need to know whether its Sata-controller supports hotplugging. Therefore I (think I) need to know which Sata-controller is used in my computer. Can anyone tell me how I can find that piece of info?
ps. Some info on the environment: It is running an AMD Geode processor which only support IDE and therefore the board has a Pata to Sata converter build in. When I do 'lspci' it only shows the IDE connection:
root@voyage:/etc# lspci
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 33)
00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
00:06.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:07.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:08.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
[Code]...
View 2 Replies
View Related
Jan 10, 2010
I have been trying for a few days to install CentOS 5.4 on an IBM x306 and I cannot get it to properly handle the Adaptec Embedded SATA HostRAID Controller. I have been working with Linux for a few years, but this is new territory for me. I typically use Debian-based distros, but I did some research on the IBM site and found out that RHEL is a supported OS for this machine. So, I decided to give Cent a try. I have some experience with Fedora, so it's not totally foreign to me.
Anyway, I'm a bit confused. Using the IBM RAID utility, I set up a mirrored pair of 1GB SATA HDDs. When I run the Cent installer, it sees the pair as a single array. I am able to partition the array and complete the install, but when I boot into the OS, it sees the drives as 2 separate devices, sda and sdb. I can pull either one of the drives and boot with a single disk, but it doesn't seem to behave as a mirrored pair. If I make changes on sda, they are not replicated to sdb. Also, I can't use the cli or GParted to format the existing space on the array. I get an error either way. I believe this is because Cent doesn't have a driver for the RAID controller, but I don't see why it would work in the installer, but not the installed OS.
My next approach was to start over and attempt to run "linux dd" at the start of the installation. I tried to find the driver for the controller on the IBM site so I could load it when prompted, but couldn't find a newer version than RHEL 4 Update 3 (I'm assuming this would coordinate with CentOS 4.3). I tried it anyway, but when I select the floppy during the setup, it tells me it's not for this version of CentOS. I read several times that there are .img files that might help me in the 'Images' directory of disk one, but I only see diskboot.img, minstg2.img, and stage2.img. I don't think any of these are what I'm looking for. I thought there was supposed to be a drvblock.img or driverdisk.img.
View 3 Replies
View Related
Nov 27, 2009
OS 11.2. When I try to log in my account I get the message {kstartupconfig4 does not exist or fails. The error code is 1. check}. I can only log in as root. As root, I check the file system and my files are there in /home/Myname. I can run all my programmes. The executable kstartupconfig4 is there.
View 9 Replies
View Related
Mar 25, 2011
I'm using OpenSUSE 11.4, trying to install to an iSCSI partition. I'm using gPXE to boot to my iSCSI volume. This works fine, and pulls up grub with my boot options. I think boot the openSUSE 11.4 entry, which kicks off the boot process. I see the steps for running DHCP on the interface, but when it gets to iscsiadm, there's an error logging in to the iSCSI target portal along the lines of "15 - already exists. After that things start to fall apart - I/O errors, mainly, and the system completely fails to boot. What's going on and what this already exists message means?
View 8 Replies
View Related
Aug 18, 2010
A friend of mine bought a prebuilt system from a local computer store that has the Gigabyte GA-H55M-UD2H motherboard and he says he can boot Fedora off the CD but cannot install it as it doesn't detect the harddrive.
I assume it can't detect the SATA Controller as I am pretty sure hard drives use a universal driver so the only way for it not to detect the hard drive is if the controller is not detected.
I was wondering if anyone here has this motherboard and has this problem.
I think I gave him a Fedora 12 CD. (EDIT: It's Fedora 11 judging by the filename of the ISO I have on my Desktop...)
I myself haven't used Linux in a while since I completed my Linux course and this game I play needs Windows, but I am trying not to play that game as much anymore though because of free time issues... I have an Ubuntu Dualboot but have become used to Windows again. I am gonna try using Linux in a VM to get accustomed to it again, this way I can play with different versions/distros and still have the Windows 7 host as a fallback is something doesn't work...
View 2 Replies
View Related
Jan 28, 2010
I'm not all that familiar with what it is that the expensive SATA cards do, other than providing on-board cache and many ports, but all things considered what can't a CPU and lot's-o-RAM do that an expensive SATA card can?This assumes, of course, that you weren't planning on using the CPU to run other applications (i.e. a SAN type setup).
View 11 Replies
View Related
Sep 29, 2009
On an Asus P5Q motherboard, CentOS 5.3 x64. (Separate thread as the other one has turned into just a discussion on my lm_sensors issue). The motherboard's primary SATA controller is the Intel P45 chipset. 6 ports, set to AHCI in BIOS, and all works a charm. Attached are 6 x SATA drives (2 x OS, 3 x data RAID5, 1 x backup). There is also a Marvell chip that provides PATA and also an underlying SATA chip (2 ports) that can do what Asus call Drive Xpert (stripe or mirror RAID) or be set to just standard SATA ports.
It's a SIL5723 behind what CentOS sees as "03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)". Physically the Marvell has only a single optical drive attached to its PATA interface. CentOS has loaded marvell_pata (I assume for the PATA side of it) but I have no /dev/cdrom or /dev/dvd so no optical drive CentOS is trying to use 'ahci' for the Marvell's SATA ports. Dmesg tells me that when it 'sees' them as it boots:
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
ata9: DUMMY
It attempts to read SATA drives attached to it, but it just errors trying to access them on boot (e.g. "ata7: failed to recover some devices, retrying in 5 secs" etc). I need the extra SATA ports, and I could really do with having a usable CDROM drive. I found a driver for the Marvell 88SE6121 from Asus. But the latest driver in that is for what it calls "RHEL 50.2" and the script fails with a "Generic Protection Error". That driver looks for kernel "2.6.18-92.el5" in its base_ver variable in the script. Changing the base ver to -128 doesn't help. I have uploaded the driver for if [URL]. Is that modifiable to work on 5.3 / soon to be 5.4?
View 12 Replies
View Related
Jan 8, 2010
I am using Dell Inspirion 1545 core 2 duo T6600, 3 gb ram,320 gb sata hddand in my bios i got 4 option (1) disable which disable sata and hdd is not detected (2) ATA where in my M$ is working(3) AHCI which mode will work. also i am using vm-ware to installed redhat linux 5.my hdd did not detected. do u need any information tell me i will post it on the same any command out put or log by which we can solve this problem.
View 1 Replies
View Related
May 31, 2011
I upgraded F14 to F15; However, F15 no longer recognizes my 3 sata disks connected through Marvell controller. The controller is an integrated Marvell chipset 88SE6480. The controller has its own manufacturer driver but it was intended for RHEL 5.4 (mv64xx) and installation of this driver fails to generate mv64xx driver.
View 3 Replies
View Related
Aug 24, 2011
I bought a Rampage III Extreme Black Edition wich has a SATA III controller (Marvell 88SE9182). I try to install Fedeora Core 15, but FC15 just dont recognize any of my HDs placed in SATA III ports. Has any fellow succeed installing linux on this SATA Controller?
View 8 Replies
View Related
Feb 12, 2010
No matter which ubuntu version at 95% through the install it will complain that grub failed to install.
I'm installing this on an HP XW6600 with hardware raid striped.
I can use the supergrub rescue CD to boot to ubutu after, but whatever I do doesn't seem to get grub installed.
Any ideas on how to proceed? I'm guessing I need to install grub from scratch.
View 3 Replies
View Related
Jun 3, 2010
I'm having a problem with the installation of Ubuntu Server 10.04 64bit on my IBM xSeries 346 Type 8840. During the installation the system won't recognize any disk, so it's asking which driver it should use for the RAID controller. There's a list of options, but nothing seems to work. I've been searching the IBM website for an appropriate driver, but there is no Ubuntu version (there is Red Hat, SUSE, etc). I was thinking about downloading the correct driver onto a floppy disk to finalize the installation, but apparently no 'general' Linux driver to solve the problem here.
View 1 Replies
View Related
