OpenSUSE Install :: 11.3 - Red Error: "the Boot Loader Installed On A Partition That Does Not Lie Entirely Blew 128 GB .The System Maight Not Boot"
Mar 29, 2011
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
I'm trying to install opensuse 11.4 but I got this error:
"The bootloader is installed on a partition that does not lie entierly below 128 gb. The system might not boot if BIOS support only lba24(result is error 18 during install grub MBR)"
What should I do before click next step to install? I installed opensuse with this error and some times opensuse can boot and some not. At least I was able to boot safemode.
I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.
I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
I want install 10.10 Maverick on a new partition alongside my OS X and 10.04 Lucid installs to see if it works on my machine. I'm a little unsure about some things.
1)Do I need to install the GRUB boot loader on this new partition?
2)Can I use the same swap space or is recommended to create a new swap?
Note: I am doing such setup for the first time so I don't know if there is a problem with given opensuse version or problem with what I am doing. System: openSUSE 11.4 RC1
Desired setup: entire system except /boot partition on hard disk, /boot partition on USB (pendrive). Aim -- making impossible to boot from hard disk, forcing boot from the USB (please, don't question my aim, I am just trivializing the issue here to shorten the description).
Setup: I set /home and / partitions on hard disk (/sda), /boot partition on USB (/sdb), I selected the options to Boot From Boot Partition as well as Boot From Master Boot Record. Finally I selected Boot Loader Options and selected Set active flag in Partition Table for Boot Partition. I installed the system.
What works:
a) without pendrive inserted I cannot start the system b) with pendrive inserted GRUB menu shows up and system is ready to boot
The problem: after initial starting, there is long pause, and system switches to text mode with error:
Code: drive "/dev/disk/by-id/id_of_my_pendrive" is not found Since the console worked, I logged in, and yes, actually there was not such disk found. But the disk (pendrive) was there -- the initial booting took place not from void, but from it. So why it is not present? Out of curiosity, I pulled it out, and plugged it in back, now it was visible in "dev/disk/. Question: what should I change/tweak for correct booting the system from pendrive? Or is a bug in 11.4 installer? I would like to setup everything as it should be done -- I mean within installer.
What I found so far: Booting encrypted system from USB stick - Gentoo Linux Wiki it is similar problem to mine, but only similar. I have other symptoms.
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
I had installed Win Xp on my first physical partition, and SuSe on Second partition now i formated the Xp and the GRUB is vanished from MBR i want to rload it . i tried it using Rescue System but still Show error msg. "cannot load OS" on booting. tried to install and using repair option i selected MBR field . but not working ..
I have had to reinstall SuSE 11.2. After its successful completion it got into a strange situation: the boot loader identified a boot record on the hard drive and displayed the appropriate message on the screen - but then nothing happened. When I restarted the system with the live CD and chose "boot from hard drive" it got to the normal boot menu without difficulty. I have no idea why the second method succeeds while the first fails
Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.
P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.
I am running Windows 7 and openSuse 11.3 as a dual-boot system. I had to run a Windows 7 Startup Repair, which apparently reset the Windows boot loader, so now I am not getting Grub. How do I reinstall or reactivate the Grub boot loader? I am assuming I have to use the installation DVD?
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory bash: ./etc/sysconfig/chron : cannot execute binary file X_MOUSE_CURSOR : Undefined variable
I have a single boot system that was working great until this morning when it locked up. I was working as I always do when the system stopped responding completely. CTRL+F1 did not work to allow me into the back so I could log in and see what was happening.
CTRL+SHIFT+SysRq did not recover the system or interrupt what ever was causing the lock up.
SSH from another system failed as the client did not respond
So I had to do a hard boot and when I did I got this:
GRUB Loading stage1.5.
GRUB loading, please wait... Error 17
Again this is a single boot system no Windows other than in VMWare inside the install. It is a multi drive with RAID set up workstation that I have at work. The short of it I am sole IT support as our companies ITS will not support Linux. In 5 years of operations with Linux at work this is my first issue, and I can't figure it out. I already tried the PartedMagic solution (ref = Re-Install Grub Quickly with Parted Magic) and that didn't work.
I re-installed the system completely even going to the extent to change my partition scheme just to make sure that wasn't the problem (which doesn't make sense as the system had been running for 46 days non-stop without a problem). Upon reboot after performing a complete security update I got the Error 17 message again.
Most of the filesystem tools and partition programs featured by Parted Magic include man pages. To read a manual page, simply type man and the name of the tool. (Examples: 'man ntfsprogs' or 'man fdisk')
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:
- downloaded Knoppix 6.2.1 ISO and burned to CD - booted with CD - opened terminal with root privileges and typed: grub (ENTER) grub> find /boot/grub/stage1 (ENTER) > (hd0,2) grub> root (hd0,2) (ENTER) >Filesystem type is ext2fs, partition type 0x83 grub> setup (hd0) (ENTER)
setup was successful (no error messages)
Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
I having a problem getting my grub loader to see one of my hard drives. I added a drive, and my grub loader lost track of where everything was. I couldn't get my old linux (Red Hat 9) so I installed SuSe on my new hard drive. But I need my be able to boot from my old hard drive because it has apps that only run on the earlier version. From /proc/partitions the old hard drive is sdd
major minor #blocks name 8 0 976762584 sda 8 1 2104483 sda1 8 2 20972857 sda2
I got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
I have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
I am trying to dual-boot windows xp and ubuntu 8.04LTS from two separate hard drives, on a compaq d510 evo SFF. With research, the best way to do that seemed to be to upgrade to Grub 2 and all would be well...not so much. I installed each OS with the other hard drive removed, fyi. I believe that this tells me that I SHOULD be able to boot off either drive, if I could get Grub 2 to recognize...
Code: steve@Stewie:~$ sudo fdisk -l Disk /dev/sda: 40.0 GB, 40060403712 bytes 255 heads, 63 sectors/track, 4870 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb788b788 .....
Code: steve@Stewie:~$ sudo update-grub Updating /boot/grub/grub.cfg ... Found linux image: /boot/vmlinuz-2.6.24-27-generic Found initrd image: /boot/initrd.img-2.6.24-27-generic Found linux image: /boot/vmlinuz-2.6.24-26-generic Found initrd image: /boot/initrd.img-2.6.24-26-generic Found memtest86+ image: /boot/memtest86+.bin done
I have also tried adding the proper code to the 40 custom file, and while I could at least get it to acknowledge my changes, I couldn't seem to find the magic code to get it right.... The other thing I tried was adding GRUB_DISABLE_OS_PROBER=false to /etc/default/grub and last but not least, here is my results.txt from the boot info script. I also tried uninstalling/reinstalling grub 2, perhaps I created issues there?
Code: Boot Info Script 0.55 dated February 15th, 2010 Boot Info Summary: => No known boot loader is installed in the MBR of /dev/sda => Windows is installed in the MBR of /dev/sdb
