I am setting up iSCSI on Oracle Enterprise Linux.
After configuring the iscsi service, the symbolic link iscsi under the /dev folder is not created when the iscsi service is started.
Created the following UNIX shell script /etc/udev/scripts/iscsidev.sh on iscsi client node:
..............................................
#!/bin/sh
# FILE: /etc/udev/scripts/iscsidev.sh
[Code]....
on bootime the system hangs till pressed <alt><esc> a couple of times. The splash image is shown and the bright spot nearly full. The network and disk led's are off. System is hanging.After <alt><esc> ing a couple of times the leds blink,, the system comes up and the gnome login screen appears. The same behaviour ( exept of the gnome login screen )if starting with runlevel 3.Press 'I' to enter interactive startup.udev starten: %G[60G[[0;32m OK [0;39m] Is it possible that the udev error is responsible for the stattup - hang?
View 6 Replies View RelatedI have never done this before but stood up a new Debian (testing) x64 system. It only has 146GB available for RAID1 so I created a 500GB iSCSI LUN on my NAS device on the network and am really confused how I can attach my Debian to the iSCSI LUN I created. Right now the OS is installed all locally on the machine but I would like the iSCSI LUN to be the /home directory for mail storage. Is this possible or do I need to mount the LUN to a newly created folder / mount point that is locally attached?
View 1 Replies View Relatedi have this error message after configuring nvidia graphic driver. there is one line that says FAILED, i pray somebody to explain to me what it means and solution.
Welcome to Fedora
Starting udev: [ OK ]
Setting hostname mikel: [ OK ]
Setting up Logical Volume Management: No volume groups found
[ OK ]
Checking filesystems
[Code]...
I'm using OpenSUSE 11.4, trying to install to an iSCSI partition. I'm using gPXE to boot to my iSCSI volume. This works fine, and pulls up grub with my boot options. I think boot the openSUSE 11.4 entry, which kicks off the boot process. I see the steps for running DHCP on the interface, but when it gets to iscsiadm, there's an error logging in to the iSCSI target portal along the lines of "15 - already exists. After that things start to fall apart - I/O errors, mainly, and the system completely fails to boot. What's going on and what this already exists message means?
View 8 Replies View RelatedI am trying to install iscsi-target on centos 5.4 i386. When I go into the iscsi-target directory and type make I get the following error:
[root@cluster-storage iscsitarget-1.4.19]# make
cc: /lib/modules/2.6.18-164.el5/build/include/linux/version.h: Datei oder Verzeichnis nicht gefunden
cc: keine Eingabedateien
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -lt: unary operator expected
make -C usr
make[1]: Entering directory `/opt/iscsitarget-1.4.19/usr' .....
make: *** [kernel] Fehler 2
When I plug in my camera via usb I see this error
Code:
load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name
This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/
After an online upgrade from f11 to f13, on rebooting the setup attempts to configure the wireless connection and fails with a not very illuminating "error configuring your network interface" notice, offering no option but to go back and try again, which of course fails again with the same error.
Wireless card is a D-link that works fine with the ath5k driver in f11.
how I can get out of this vicious cycle and proceed with booting the upgrade?
I tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
was able to install iSCSI target via yum, configured a couple of target LUNs, in fact all the same steps that worked on Fedora 10 appeared identical. However, when I try to start the service the following happens.
[root@Server01 ~]# service iscsi-target start
Starting iSCSI target service: FATAL: Error inserting crc32c_intel (/lib/modules/2.6.29.4-167.fc11.i686.PAE/kernel/arch/x86/crypto/crc32c-intel.ko): No such device
[code]...
How I can auto-mount a iSCSI drive into a folder? Because every time I reboot computer, I need to mount it manually.
View 3 Replies View RelatedSo I've been trying to install to an iSCSI target for the past two weeks and while the installation finishes, booting doesn't work. I get dropped to a shell after boot installation. I have seen some bugs on red hat bugzilla 705213, but don't know how to resolve it. I'm new to Fedora but really want to embrace the distro
View 2 Replies View RelatedI was updating the security updates in my deskptop. It did not executed successfully even after 7 hours. It remain just like hang up. So I switched off the PC and rebooted. Then it is showing the error: "udevadm trigger is not permitted while udev is unconfigured. Gave up waiting for root device."
Now my Lucid Linx is almost dead. There is also no 'Repair' option while booting from Ubuntu 10.04 CD. Pl help to restore it.
I'm trying to install Fedora 11 x86_64 on system with Adaptec U160 and 2 Ultra160 HD. It is not part of a network and iSCSI is not wanted. But the installer keeps selecting iSCSI automatically and won't let me change it. I try to do a "replace linux system" with my own partition scheme-which preserves the partitions already on this drive. I eventually have to exit the installer.
View 1 Replies View Relatedi am in the process of installing apache 2.2 with php 5.3.2, my problem is that after installing and configuring them , this important module libphp5.so is no where to be seen under /usr/local//apache2/modules/, so when i attempt to start or stop apachectl , i get the following errors ..
httpd: Syntax error on line 54 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/libphp5.so into server: /usr/local/apache2/modules/libphp5.so: cannot open shared object file: No such file or directory
this is how am loading the module in httpd.conf
#LoadModule php5_module modules/libphp5.so
why isn't this file there . is there a way i can get this to work
I'm using CentOS 5 with WHM & exim 4, & when I configured exim to use gmail as an outgoing mail server I got this error:
Code:
2010-10-13 20:20:33 1P64vN-0002h0-7v ** email@domain.com R=send_via_gmail T=gmail_smtp: SMTP error from remote mail server after MAIL FROM: SIZE=5387: host gmail-smtp.l.google.com [**.**.**.**]: 530-5.5.1 Authentication Required.
Learn more at 530 5.5.1 [URL]
Only debian solutions & paths that doesn't exist in my servers.
I have two touch screen monitors tha tI'm configuring for a dual-head display.That is working.For the touch screens it's a bit more complicated, each touch screen requires that I apply a specific config file for each individual TS (touch screen). Each config file is unique to it display. for that I'm using xinput to apply those configuration.My problem here is that the TSs are the same model and show up under udev and xinput under the same the same name minus the different hardware IDs whish is the only way that I can currently distiguish them.So far I've experimented with tweaking the udev rules for a particular TS with no luck (more than likely because I might be doing it wrong).I ned to be able to tell the two appart when I apply the configurations in xinput so I can write a script that will do this automatically for me.
View 1 Replies View Related/etc/udev/rules.d/20-our.rules has worked perfectly in FC6 and F10. In F11 I can't get udev to even look at it, much less execute the udev commands in it. Stat tells me that none of the relevant files have been accessed when I plug in a USB device that udevadm says was processed and which clearly matched the rules.. I reboot with several USB devices plugged in and according to stat nothing anywhere in /etc/udev was accessed during the boot process.
View 11 Replies View RelatedHaving finally made the switch from Windows (7 Professional) to Linux (Fedora 13) on my laptop, I'm now trying to get all my devices working, specifically an Olympus VN-4100PC Digital Voice Recorder. I've installed odvr and it works in root, but not as a normal user. The installation instructions say: odvr *requires* access to the user-space USB interface.
It is recommended to place "41-odvr.rules" into "/etc/udev/rules.d" or setup your own udev rules rather than running odvr as root. After changing udev rules, don't forget to run "udevcontrol reload_rules" and to replugin your DVR. Again, root privileges are required unless udev is properly setup. The file "41-odvr.rules" (designed for Ubuntu) has the following content:
SUBSYSTEM=="usb", SYSFS{idVendor}=="07b4", SYSFS{idProduct}=="020d", ACTION=="add", GROUP="audio", MODE="0664"
I tried just doing what it said and copying it to "/etc/udev/rules.d" but it didn't seem to work. Looking at other files, I then changed it to:
SUBSYSTEM=="usb", ATTR{idVendor}=="07b4", ATTR{idProduct}=="020d", ACTION=="add", GROUP="audio", MODE="0664"
And now if I do "ls -l /dev/bus/usb/002", I get:
crw-rw-r--. 1 root audio 189, 134 Oct 15 01:21 007
Which seems to suggest that it is running the "41-odvr.rules" file, since lsusb gives:
Bus 002 Device 007: ID 07b4:020d Olympus Optical Co., Ltd Digital Voice Recorder VN-240PC
But odvr still doesn't work as a normal user, giving:
Failed to open Olympus device: couldn't claim interface
I have done a fresh text-only installation of Fedora 10 on a Dell Dimension E521 for the purpose of setting up a server. After installation I ran yum update to bring the system up to date. After the update, I rebooted the computer, but the boot process froze. I recycled power and pressed "I" after the Dell BIOS screen and the GRUB bootloader appeared. I selected the most current version, edited the kernel line by deleting "rhgb quiet" and replacing it with "3." After making this change, I continued with the boot and the computer stopped at "Starting udev:" I have two fedora 10 revisions showing in the GRUB bootloader, the original installation and the update after running yum.
I repeatedly tried rebooting both versions and, after about 30 attempts, the computer finished booting and got me to the command prompt. Reading through the forums indicated there might be some issue with my nVidia GeForce 6150 onboard video and fedora 10. So, when I got to the command prompt, I followed the instructions in the forums [URL] to load the rpmfusion drivers. This appeared to be successful and when I looked at /etc/X11/xorg.conf it appeared to be correct for the new nVidia drivers. After loading these new drivers I tried rebooting. Unfortunately, I have been trying now over and over to get back to the command prompt, but simply can't get past "Starting udev."
i'm heaving the following message at boot time: "Starting udev: udevd[114]: unknown key 'DEVTYPE' in /etc/udev/rules.d/70-cups-libusb.rules:6", i guess it's something about usb printing support but i am not sure, and i don't know how to fix it, does any of you guys know what this exactly means and how to fix it
View 6 Replies View RelatedI ran update on my ASUS N51Vf laptop yesterday and among the updates there was one for udev. After installing it udev refuses to start at all saying: "iTCO_wdt: unexpected close, not stopping watchdog". Then I get to login but not for long: after several seconds either system reboots instantly or it hangs shutting down display. Is there any way to rollback udev update somehow considering I can't even login into system?
View 5 Replies View RelatedIn the not so distant past, I was able to hide arrays/encrypted arrays from nautilus with udev rules as follows:
Code:
## HIDE Encrypted "dm" partitions from nautilus
SUBSYSTEM=="block", KERNEL=="dm-*", ENV{ID_FS_USAGE}=="crypto", ENV{DKD_PRESENTATION_HIDE}="1"
## NOTE: not needed by Fedora
[code]....
F15_x64, upgraded from F14 on Sandy Bridge. Any idea how to troubleshoot this slow loading service?
Code:
[root@sandy andy]# systemd-analyze blame
4598ms udev-settle.service
1611ms fedora-wait-storage.service
Code:
[root@sandy andy]# systemd-analyze
Startup finished in 2024ms (kernel) + 1527ms (initrd) + 11217ms (userspace) = 14770ms
[root@sandy andy]#
[Code]...
I've tried systemctl disable udev-settle.service, but it doesn't work, service loads on every boot.
I am trying to install atheros AR5007EG on my toshiba laptop -i figured out that best way to install this wireless card is through madwifi -while configuring madwifi i get this error
I am posting the output of different commands so you can understand better -i manually tried to link the build directories to kernel-source which failed - i am not sure exactly what kernel source is and how i can link to kernel source -
My output:
I have Fedora 13 installed in a new computer, and form some weird reason, udev is skipping three of my HDs. Looging the output for udev --triger, the entries for the HDs are skipped
Code:
[root@storage ~]# lspci
00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C)
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) .....
my fedora 10 booting stops at starting udev for 5-6 minutes.when i pressed 'i' for interactive , i see ata3(i think its my DVD-R/W) responding too slow. so, booting stops there till it responds.o/p of
Code:
dmesg | grep -i ata3
gives
[code]...
Fedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11.
I dual boot with Windows 7 for games.
System specs:
Motherboard: MSI P45 Platinum
Processor: Intel Core 2 Duo E8500
Video Card: Radeon HD4850
Memory: 4GB (2x2GB) Patriot
HDD: Main: 250GB SATA Western Digital
code....
I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
I have installed fedora-ds-1.0.4-1.FC6.x86_64.opt.rpm on RHEL 5 Enterprise, which I use for Oracle BIEE. Now I need to install the FDS in another RHEL 5 and mirror only the FDS.
configure the mirroring part for the Fedora Directory Server.