Ubuntu Installation :: Dualboot: Freeze After Grub
Feb 8, 2010
I just tried a dual installation. Win7 sits on my internal HDD, Ubuntu has a partition on my external HDD. The external Hdd is set up to have ~900GB of NTFS file storage and ~100GB for / (ext4) and a seperate swap partition. I partitioned it that way from the livecd installer. I have to say that I'm basically fresh out of ideas. I can boot Ubuntu 9.10 64bit just fine from a Usb stick. Installation also worked fine, I had the installer install Grub on the external Hdd. I am quite sure that it actually *is* on the external hdd, since unplugging it as well as changing the boot order to internal hdd first results in a straight boot to Win7.
Anyways, booting from the external device, I get as far as the grub OS selection prompt. Windows 7s loader can be started without any problem from here. However, choosing Ubuntu (recovery or not) results in... nothing. The system plain simply freezes up (I gave it some time) and can only be reactivated by resetting it. So far, I tried manually editing the boot entry by pressing "e". I changed the root entry from 2,2 to 2,0 to 2,1 to 2,3 and 2,5. Afterwards I tried booting by pressing ctrl+x. The result always stays the same. No boot, frozen system. Pc: C2D E6750, Gf8800GT,4GB Ram. Pastebin of grub.cfg: [URL]
View 2 Replies
ADVERTISEMENT
May 17, 2011
I was running Ubuntu 11.04 next to Windows 7 but lost my DualBoot after re-installing my Windows 7 using a backup image. The Ubuntu Partition (/dev/sdb5) is unchanged. Windows 7 comes with a default Bootmanager Partition (dev/sdb1) in size of 105MB. Here my system (2 Harddisks)
[code]...
View 3 Replies
View Related
Mar 22, 2010
I have a dualboot system with Ubuntu and Windows 7 (grub bootloader). I updated the firmware in my HD, and now grub doesn't work. After POST, instead of getting the menu of OS options, I get "Non-system disk: press any key."After pressing a key, I get the Windows 7 loader, with only a Windows 7 OS option. Windows 7 boots fine, but I have no way to boot into Ubuntu.
View 9 Replies
View Related
Nov 29, 2010
my dualboot grub is not working properly. I have it set to start opensuse/W7, but when I start windows, I get an error message that the bootmgr is not working, and that I should press ctrl/alt/del/ to reboot.
View 5 Replies
View Related
Jun 7, 2010
I've setup a dualboot-system. SUSE 11.2 starts automatically and works well all the time.
But when I want to use XP (yeah, sometimes I do that...), in about 40% of all cases it won't be loaded when chosen in GRUB. Just a black screen without anything else.Then I need to restart and in the 2nd trial it works!
View 5 Replies
View Related
Aug 28, 2010
I had on my notebook Windows 7 and Win Vista. I deleted partition with Vista and installed Ubuntu, but now when I turn on my notebook Ubuntu starts automatically, there is no option to choose Ubuntu or Windows 7. Why ? What should I do ? there is still that partition with Windows 7 I did not delete it.
View 9 Replies
View Related
Oct 21, 2010
I have a problem installing ubuntu 10.10 (64 bit) with dualboot together with windows 7.
The situation is a follows: on the pc is windows 7 (home premium) installed, the windows bootloader is in the MBR and THIS CANNOT BE CHANGED (it's not a private pc).
I wanted to do this the way I have done with the previous ubuntu realeaes I used (8.04 and 9.04): install everything normaly and only tell the installer to install GRUB into /dev/sda5 (root-partition of the ubuntu-System). Then I used
Code:
To copy the bootsector in a file and integrate this file into the Windows Bootloader. The problem is: this file has only zeros inside (00hex), so it seems, that there is no GRUB written into the bootsector of the linux-partition.
The whole procudure works without any problems using Windows 7 and ubuntu 9.04, but I want to have the new release of ubuntu!
View 5 Replies
View Related
Aug 17, 2011
I am currently using Ubuntu 10.10 on my laptop. I saw Fedora had the new Gnome3, so I decided I might like to try that, My hard drive is about 230GB. Ubuntu currently has all of it, and I would like to make a small partition for Fedora. I know that during the Fedora install you can resize the current Ubuntu partition manually, very simple, gives you the size in MB, and you just shrink it, and Fedora takes up the remaining amount of space.
My actual question here, is how would I, if I should like Fedora 15 more than I thought I would, proceed to shrink the Ubuntu partition more, and increase the one for Fedora?
Ubuntu would have 200GB. Fedora would have 30GB. How do I go from this point, to having Ubuntu use 180GB, and Fedora having 60GB?
I realize there are lots and lots of guides already on the Ubuntu website for help with partitioning etc, but they all seem to be about first time install, or for doing so with windows. All I would like to do is use something like gparted to resize the Ubuntu partitions and expand the Fedora one.
View 1 Replies
View Related
Mar 10, 2010
Im currently a Windows Vista user, and would like to get test some linux distributions - Ubuntu is one of them, Ubuntu Studio is another. Iinstalling muliple OS's becomes overly complicated on my old vista machine. Therefore:
Can I simply turn a regular dualboot into a "fake" triple boot by adding wubi to Vista? Should wubi be installed before the dual boot distro or vice versa? Does it make any difference what the "real" dual boot distribution is? I would like to test Ubuntu Studio (not included in wubi) and OpenSUSE. Is either of them better to test first, because they do a better job in easily replacing an old distribution in a dualboot etc.?
View 2 Replies
View Related
Dec 5, 2010
I want to dualboot my HP laptop with Windows 7 and Ubuntu. The problem is that the harddrive had 4 primary partitions. So i had to delete the Recovery and HP TOOLS partions. I did that after creating my system recovry CDS. The "install alongside another operating system" option showed up. And i was really happy for about 1 minute until i discovered that it said Windows Vista loader! So now i have this:
sda 640GB harddrive
sda1 Windows 7 loader
sda2 Windows Vista loader
And when im trying to install a dualboot the Windows 7 loader dosent show up! It wants to install Vista loader but i dont have that operating system. I have read that 7 and Vista sometimes gets mixed up in GRUB can this be the case here? Is it safe for me to install Vista loader with Ubuntu 10.10?
View 9 Replies
View Related
Jun 17, 2010
I have winxp and ubuntu 10.04 dualboot. They were working ok. Today I removed old *21 kernel image and headers so grub updated the confs. That's all I did that could cause the win no longer boot. It starts booting, the screen goes black and the PC reboots. I tried safe mode, it started to load some dlls as it usually shows in safe mode but then still reboot.
Code:
$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
View 3 Replies
View Related
Nov 3, 2010
I have a Samsung N130 with XP and Ubuntu 10.04. One day I entered the Vista Loader in the GRUB 1.98 and it took me into the Samsung Recovery Partition! Now my BIOS reboots in a loop and no GRUB is shown anywhere! F9 does work (Long Beep is heard) and F2 (Recovery). I tried the UBUNTU install CD and I get a STd error and my drive slows down.
View 7 Replies
View Related
Aug 9, 2011
I have 2 HDD's on my computer. On HDD 1 i have a Windows Vista installed, on HDD 2 my fedora is installed. I am so pleased woith the fedora system that i dont even use the windows system anymore.
Now i want to uninstall the windows. How can i do this the best way that the result is that the existing Fedora stays and boots on computerstart and that i can use the HDD where windows was on the fedora system to store stuff (now the fedora system cant see the windows hdd becouse its NTFS)
View 7 Replies
View Related
Jul 31, 2011
I locked the screen, came back, typed the password, screen remained black, though cursor was visible and moving. Nothing I could do to rejuvenate the screen. Had to switch to tty6, sudo shutdown -r now. Then, on reboot obtained kernel selection, it proceeded to displaying kernel messages, but froze on sdb, after 3 secs. I figured it was the usb, so turned off, removed usb cables to external hard drives, but again it froze saying something about firewire mouse, the mouse is also usb. I tried several times, but no matter what kernel I chose, I couldn't get it to boot. So I loaded puppy live cd, but now it can't access some parts of the disk. I was running utorrent and the folder with partially downloaded files can be accessed but there's nothing there (there was), and some folders can't be accessed at all.
View 2 Replies
View Related
Jun 30, 2010
So I have a single hard drive with two partitions, and I am trying to install a dual boot of Windows XP and Ubuntu. However, I am having an issue installing the Windows XP component.
I keep getting an error along the lines of a missing/corrupt hal.dll after the first restart in the install. This has happened every time I tried to install windows XP, from several different discs, all of which I have confirmed to work on another computer.
I have tried several things for fixing this, from repairing the MBR and boot.ini to replacing hal.dll from hal.dl_, and nothing works. However, Ubuntu 10.04 installs and boots properly.
What I can do to get Windows to install properly?
View 9 Replies
View Related
Mar 12, 2011
I have a Tecra A7 with Intel 945GM. /boot is in a Ext4 partition and the rest is LVM2 splitten in 3 (/: Ext4, /home: Ext4 and swap). There is also a windows partition in the disk: I have installed openSUSE 11.4 (clean but keeping my /home directory untouched why is there since my openSUSE 11.2 installation). I have the following questions:
1.- During the installation I tried to shrink the windows partition and grow the LVM2 . The installer said that the partition was in use and could not be modified. I thought that during the installation the parititions where not mounted. Why is this? How can I grow now the physical volume (not the logical ones)?
2.- Solving this problem I realized that there a lot of duplicate files in .kde and .kde4. Can some of these be deleted?
3.- At boot, the computer frequently freezes after GRUB. Is right after selecting an option in GRUB, so it might be at mounting. In the failsafe configuration, it happens less frequently. How can I diagnose what is really going on?
4.- Every time I navigate into a webpage which contains a login form, Chrome ask me to unlock kdewallet. It is extremely annoying because this happens with all webpages, not just the ones in which I am registered.
View 1 Replies
View Related
Feb 23, 2011
I just bought a Intel D525MW ITX board, a PicoPSU and a stick of 2GB ram.
I burned the new stable debian netinst to a disk and booted it up from a usb cdburner. At this point I had a usb keyboard and a usb kingston pen drive (temporary / ) connected. The computer would freeze whenever I chose a menu item. I rebooted a couple of times, same thing. I disconnected the usb pen and were finally able to start a graphical install. I quickly reconnected the pen and the install went fine as far as I could see.
Now. When I boot from the pen it just freezes showing "GRUB lading. Welcome to GRUB!" and a blinking underscore.
I were able to boot the usb pen on my Alienware laptop just fine - although it wanted a reboot after it ran a fsck.
View 2 Replies
View Related
Jan 11, 2010
I had a total freeze during a kernel upgrade, and reinstalled my system(kubuntu karmic) but still cannot boot.
when I try, I get this sequence of text on my screen:
Code:
GRUB loading stage 1.5
GRUB loading, please wait...
Error 15
I know that error 15 means "file not found", but not how to figure out which file it is or how to point correctly to it.
I have tried to install the system on partitions on two separate disks, with the same end result. on the original disk I had some trouble getting through grub install, but on the other disk there were no indications of trouble during setup. can this a problem with the MBR on the first drive?
I have one drive connected by PATA, the rest by SATA, will SATA1 be (hd0)[grub] and /dev/sda [linux], is it the PATA drive, or some other means to determine this without examining the make and model of each drive?
View 1 Replies
View Related
Dec 17, 2009
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
View 8 Replies
View Related
Mar 4, 2010
after fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
View 10 Replies
View Related
Dec 13, 2010
I am planning to buy a new system. I am planning to use fedora and windows vista (I have a legal copy with me and I dont want to buy a new one. That's why no windows 7 here).
How shoudl I proceed? Which OS to install first? I believe (from reading the threads) that I should install windows vista first and Fedora second.
The main question I have is this. I heard that HDD makers will no longer ship the current HDD's in Jan. Heard that 512 byte hard drive format is to be replaced by 4KB. I read somewhere that this can cause issues when we go for dual boot. Is this true? In that case, what steps can I take to ensure no problems occur?
I really want to use Vista only for running certain applications which do not run on linux. I have heard WINE can simulate a WIN environment. But is this really true? I mean, can it simulate WIN environments perfectly?
My next question is regarding dual HDD. I am planning to go for 2*500GB HDD instead of 1*1TB HDD... So will it be better if I dedicate one HDD to Vista and 1 HDD to Fedora? (I know it will be a waste of space since I will be using Fedora mainly and hardly aropund 10-20 GB for Vista. But I can access the Vista partitions)
Does fedora play all media formats? I know out of the box it might not.. But does having VLC help?
I dont see any firewall protection in Linux. I have heard of using IPTables, but then how efefctive are those? I will be doing many online transactions and I want my system to be secure. I know Linux is pretty secure. So should I harden the security with a hardware firewall?
I will be watching a lot of DVD movies, AVI movies and some HD movies as well. Does linux have issues rendering HD movies properly? I have read somewhere that fedora has issues while Win is good and Debian/CentOS (Not sure which one was mentioned) is even better. I had a pretty powerful config in teh past and yet I have seen that my Vista machine had trouble rendering a HD movie properly.
I will be buying AMD configuration along with an ATI graphic card (sometimes). Does Fedora have any driver issues?
View 14 Replies
View Related
Aug 31, 2010
I am attempting to boot both OSX 10.6 and Enterprise Linux 5. This is what I did: sudo yum install grub.x86_64
[Code].....
Now, however, when I restart and choose to boot from the Linux partition, I receive the "loading GRUB stage 2" message, and then I receive the standard GRUB menu where I should be able to just press enter and proceed. However, instead of letting me choose a boot option, it just freezes. It is hard frozen. Nothing works. I have two keyboards hooked up, and neither the arrow keys, nor any other keys will cause anything to happen. Even after waiting several minutes, it remains frozen, even though the timeout is set to 10. What on earth is causing this freeze? I am using the exact same instructions in my grub.conf that work on the grub command line. If I delete grub.conf, then it goes back to the GRUB command prompt where I can manually type everything in, and it always works.
View 10 Replies
View Related
Jun 4, 2010
I have a Ubuntu 10.04 fresh installation on my HP laptop. Installation successful and boot OK. But the desktop randomly freeze. During freeze(about 15s each time), all programs are not responsive. Sometimes I can switch program by click, but program seems locked. How can I know which module cause the freeze?
View 4 Replies
View Related
May 31, 2010
I have a Vista/Kubuntu dualboot, with grub2 as my loader. Because i have read that Windows likes to ignore something else present on the system and overwrite everything with itself. So i installed Vista, then Kubuntu.Now i want to upgrade my Vista to Win7. My question is - what should i do in order to keep my current dualboot intact (Grub2 as a loader, and kubuntu fully functional). I fear Win7 might even never ask me about keeping my kubuntu dualboot, just overwrite everything. PS: My bootinfoscript output
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 5 Replies
View Related
Aug 24, 2010
Here's some drive info:
partition labels & uuid
Code:
Windows /dev/sdb3 (hd0,3) 5450F91950F90312
/ /dev/sdb1 (hd0,1) 72c730c7-1aa5-46cb-8957-d309de430502
/boot /dev/sdc1 (hd1,1) 3fe937cb-aa77-4516-a911-3da514d21aae
There's other partitions, but I don't think they're referenced in any of the boot files and my grub.cfg menu entries:
Code:
Ubuntu:
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
[Code].....
This problem originated when I moved XP from sdc to sdb using clonezilla. I installed Ubuntu after that, however, and I have since run update-grub, so the menu entries should reflect that move. Also, all drives are set to IDE in BIOS.
However, I can mount the windows partition in Ubuntu and read all the files fine.
View 1 Replies
View Related
Jan 3, 2011
So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies
View Related
Jul 12, 2010
I use ubuntu but i want to install fedora.How to make dualboot with ubuntu and fedora?
View 4 Replies
View Related
Feb 28, 2010
I have been reading the other posts that are similar but not the same as mine when determining the cause of grub not 'seeing' Win7. I have done all the usual things like 'update-grub' but it doesn't see it. I ran the script that has been suggested but can't identify what the issue is.
View 3 Replies
View Related
Feb 26, 2011
I have a problem in red Hat installation, I have windows 7 installed in my PC,I want to dualboot it with linux. whenever I try to boot linux from DVD, I have the following message after some time "waiting for hardware to initialize" and the installation stops.What would be the problem for this? I have the following system configuration ASUS P5B WIFI AP motherboard. core 2 duo E4500 processor 2Gigs of RAM Nvidia geforce 9400GT GFX card.
View 3 Replies
View Related
Jun 14, 2010
After screwing up my current UNR install, I have decided to get a fresh installation of regular Lucid without all the BS that comes with the netbook remix, BUT when I boot from usb and start the process I can't get past the keyboard selection phase... it just hangs there forever. I tried making a usb with the alternate text based version too but it halts at the same spot, namely detecting hdd's. Now, I've installed the UNR previously from usb without any problems so something is wrong here, I just haven't got any wiser from reading whats online either. I checked the forums etc but didn't find any answers... I'm on an Asus Eee 1005PE by the way.
View 2 Replies
View Related
