OpenSUSE Install :: Raid10 Module Not Loaded In Installation Image?
Feb 13, 2010
I am trying to install 11.2 on a system with RAID-1 /boot partition and RAID-10 /(root) partition. I have done this before with 10.3 but am hitting a wall with 11.2. In particular, the boot image loads and then halts when it tries to load the RAID-10 root partition saying that the personality is not laoded. modprobe shows that the raid10 module does not appear to be part of the boot image. I cannot find anything in the installation that will allow me to specify a module to include in the init image. How do I tell the installer to include an additional module?
View 3 Replies
ADVERTISEMENT
Jul 24, 2010
I have an Acer 1551-4755 notebook with AR5B93 wireless chipset. ath9k is loaded and my card is detected as Atheros AR928X PCI-Express wireless network adapter. However, the ath9k driver is only allowing me to connect at 802.11g speed in spite of the fact that my WRT310N loaded with DD-WRT is in mixed mode. I am able to connect at wireless N speed with my D-Link DWA-130 usb dongle, but this is a rather backward solution. Is there a way to work around this issue, ie an updated ath9k or other madwifi driver? I would hate to resort to ndiswrapper for a natively supported chipset. I am using openSuSE 11.3 for the first time, long time Fedora user.
View 1 Replies
View Related
Jan 18, 2011
After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
View 9 Replies
View Related
Aug 8, 2010
I have installed Virtualbox PUEL in 64-bit 11.3. This is a fresh install. My computer has an onboard nvidia 8300GS graphics card. I do not think this is related to the issue. I added the virtualbox repository and installed the program via yast. when I type "VirtualBox" in the terminal I get the following output:
[code]...
View 4 Replies
View Related
Jun 17, 2010
I am trying to install ubuntu 10.04 to my raid 1+0 array. Install just sees four different hd:s
main-0
main-1
storage-0
storage-1
There is not showing any size or anything. I have set two raid arrays: main and storage, both with 4-hard-driver (raid10). Storage array is partitioned to 1TB and 400GB partitions, 400GB partition is where i want to install ubuntu. Main array has windows already. Where to go next?
root@ubuntu:~/src# dmraid -ay
RAID set "isw_beieefiehj_main" already active
RAID set "isw_beieefiehj_storage" already active
RAID set "isw_beieefiehj_main1" already active
RAID set "isw_beieefiehj_storage1" already active
root@ubuntu:~/src# parted_devices .....
View 2 Replies
View Related
Aug 3, 2010
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
View 1 Replies
View Related
Jun 25, 2010
I get this error message with KINO.
WARNING: raw1394 kernel module not loaded or failure to read/write /dev/raw1394!
View 9 Replies
View Related
Jul 28, 2009
installing Frets On Fire with Fedora 11? I downloaded the binary from the website,tarred, installed everything mentioned in the read me and then ran the Frets On Fire .py file in the terminal, but I get a bad output.
Here it is:
Code:
/home/Reece/Download/Frets on Fire-1.3.110/src/Song.py:31: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
Traceback (most recent call last):
[code]....
View 3 Replies
View Related
Sep 9, 2010
I installed VirtualBox-OSE and VirtualBox-Kernel from the Slackbuilds at slackbuilds.org.When I start VirtualBox I get the following message on the CLI: Code: WARNING: The vboxdrv kernel module is not loaded.Either there is no module available for the current kernel (2.6.33.4-smp) or it failed to load.Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.You will not be able to start VMs until this problem is fixed.I gave /etc/rc.d/rc.vboxdrv executable permissions, and then ran.The only issue is, I have to do this each time that I reboot, should I add 'modprobe vboxdrv' to one of the startup scripts or is something else wrong?
View 7 Replies
View Related
Aug 24, 2010
I am trying to see if a module that i loaded on Redhat succeeds.The module is from intel called vtune_drv-x32_64-2.6.18-194.el5smp.ko.When I run the script during the installation process, it shows that it is successful.Is the "0" at the end of line meaning that the module is not successfully loaded?
View 2 Replies
View Related
Dec 22, 2010
im doing a school assignement and i cant find any info about this anywhere. How do i make sure that a module is loaded into the kernel upon boot?
View 2 Replies
View Related
Mar 30, 2010
I've Ubuntu 9.10 with 2.6.31-20 kernel.Sound kernel module is loaded, but doesn't works ;((. I have not got any errors and all programs (e.g. mplayer) thinks that sound driver is present and works OK but I can't hear a sound...A part from lspci -vvnn
Code:
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be3] (rev a1)
Subsystem: Sony Corporation Device [104d:9067]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-[code]....
View 3 Replies
View Related
May 8, 2011
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
View 5 Replies
View Related
Jan 24, 2010
I am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
[code]....
View 9 Replies
View Related
Jun 7, 2010
I've setup a dualboot-system. SUSE 11.2 starts automatically and works well all the time.
But when I want to use XP (yeah, sometimes I do that...), in about 40% of all cases it won't be loaded when chosen in GRUB. Just a black screen without anything else.Then I need to restart and in the 2nd trial it works!
View 5 Replies
View Related
Apr 4, 2011
The graphics card on a openSUSE11.4-32-bit system is a ATI RV530LE [Radeon X1650 PRO] It looks as though xorg sets it up with the RV535 or RV560 chipset if the radeonhd driver is selected Is there a way to ensure the RV530 chipset version is loaded when booting.
View 9 Replies
View Related
May 21, 2011
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
View 6 Replies
View Related
Feb 13, 2011
I am trying to set up wireless on my desktop. It has no internet whatsoever, I could hook up ethernet but I would have to transfer the whole computer across the house. I installed ndiswrapper from the installation CD. I also installed NDISGTK which is some GUI with the ndiswrapper. I clicked Install New Driver, I am pretty sure I have all the other necessary files along with the mn710.inf, but I get the error:"Module could not be loaded. Error was:FATAL: Could not read '/lib/modules/2.6.35-22-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or directory"After clicking ok, it shows the driver there, but my card is still not working, no lights or anything. Does anyone know what that error is and how I can get it working?
View 1 Replies
View Related
Dec 1, 2010
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
View 5 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Feb 21, 2010
I m having problems installing OpenSUSE 11.2 on a Intel SS4200 on a Transcend IDE 4GB Flash Module. I�m using a USB stick as install source. The Intel SS4200 device does not come with PS2 ports. Therefor I�m using USB keyboard and mouse. I have to use the vesa graphics option on the boot menu, otherwise the USB keyboard and mouse won�t work. Unfortunately the OpenSUSE installer does not recognise the Transcend 4GB Flash Module. What can I do?
View 1 Replies
View Related
Apr 20, 2010
After installing ncl 2 sp2, I restarted my computer. Now when I try to login I am getting the following error:Module is unknown. I am running openSuse 11.2 64-bit.
View 2 Replies
View Related
Apr 10, 2011
11.4 has been a bit of a pain. The broadcom driver, b44, for the Broadcom 44xx/47xx, freezes my system. I cannot be the only victim of this faulty driver.
The driver is not for the WLAN, but rather for 10/100 ethernet on a Dell Insprion 1720 laptop.
View 2 Replies
View Related
Jan 30, 2011
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
View 3 Replies
View Related
Aug 6, 2010
I have just reinstalled OS 11.2 but this time the 64bit system variant. I installed the real-time kernel and saw that the apparmor module reported an error and wasn't loaded. I have never looked into apparmor and only knows it has something to do with security, and thus I wonder if it is important to do something with this issue? I plan to use the kernel-rt and have more or less always used a variant of this kernel flavour, often self built. Though I can not recall having seen that error before and I have not used a 64bit system before
View 2 Replies
View Related
Nov 30, 2009
I am using openSuSE 11.2 on a VGN-AR41L. I have also erased the preinstalled Home Vista (what a pleasure). Now to my problem. My system boots correctly but if I press the <ESC> key while booting I can see the following messages:
"Doing fast boot
FATAL: mbcache module not found
FATAL: ahci module not found
"
and the boot process continues normally.
Why this happens? Does this mean that I have a problem that I haven't discovered yet? Is it something that I can ignore? I am using SUSE Linux from version SUSE Linux 8 personal and although I am not a power user I have done my two desertions on this system and I am very happy with SUSE. I have bought SUSE Linux 8 Personal and SUSE Linux 10 all the other versions until today have been downloaded.
View 6 Replies
View Related
Jan 23, 2010
I Just loaded 11.2 64 bit, initially the kernel was "default", however, after I installed my Nvidia drivers it changed to desktop, I'm not sure I understand? In GRUB my screen lists it as desktop. Is "default" somewhere? Was it replaced? Things seem to be working alright in most cases although I'm having inordinate problems with "virtual Box" and Vmware server. In Vbox the kernel module won't start.
View 7 Replies
View Related
Nov 10, 2010
I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
View 1 Replies
View Related
Feb 8, 2011
vmtoolsd FATAL: Module vmmemctl not found.
What does this mean and should I activate/deactivate anything in the system or is this no problem.
View 8 Replies
View Related
Mar 15, 2010
I need to install the Perl DBI and DBI::mysql modules at Amazon Web Services. Perl 5.8.8 is installed there as part of the default Fedora linux that comes with an EC2 instance. I am not familiar with Fedora, but have been using Linux for a good while.If anyone could tell/show/direct me to the quickest way to do this.
View 1 Replies
View Related
