I have two different ways to print to my HPOfficejet Pro 8500. They look like two different printers to the software.
When I attempt to print a PDF file one of these prints a mirror image; the other cuts approximately 1/2 inch from the top of the page.
OpenOffice.org files appear to print without problems.
I have openSUSE 11.2 and HPLIP 3.9.8
I'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...
KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).
Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).
It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.
So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...
Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...
I have a problem printing to my HP printer.
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
I've installed Ubuntu 10.10 on an old box to use as an office print/fax and file server. I tried the server edition but I had no chance with command line programming so I've just used normal Ubuntu.
Ubuntu itself is working fine and I've installed my HP Officejet printer and it's fully working on the Ubuntu box. SAMBA and CUPS are installed.
I've then added the printer onto my Vista machine and here's where the fun starts. The Vista box sees the printer on Ubuntu, adds it with no problem and happily prints test pages, but I can't get it printing anything else.
I can't for the life of me find any reason why it would print a test page, but not print from Word, adobe or even a browser.
I have 2 pc connected to a HP officejet j6480 1 pc connect by usb the other is eth via a router. The eth pc will not print anything but a test page. It it open a print box but won't give a option to print. The other pc is also on the same router. USB print fine.
View 1 Replies View RelatedI just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. Does anyone know if this is normal or if there is a fix. I have the printer connected with a USB cable.
View 2 Replies View Related15.4 inch laptops tend to be slightly cheaper than 14-inch laptops? Supply and demand? and if you do not mind answering another question, what's your perspective on uncle Larry eating Sun?
View 3 Replies View RelatedI've encountered some problem in setting my printer HP D1560; the printer pulls in paper but prints no image. how to set it running under WinXP?
View 5 Replies View RelatedI have just exported 3 png files out of gimp for a html document I'm working on right now, and they are all almost the same, except I need each to load when the user does something. So the first image will display on the page, and when a user puts their cursor over it, then it will load image 2. When they press it, it loads image 3.
View 1 Replies View RelatedSometimes my mouse image on the screen stops showing. The mouse itself does still work and I can highlight an icon and click it. Just the image is missing and it makes it difficult to know where you are.
View 1 Replies View RelatedI copied and pasted this from someones signature.d/__How did they write that horizontally mirrored 'd' at the end? How do I do that in Linux?
View 5 Replies View RelatedCan I download a Linux iso image from a Windows mirror? I don't see any problems, but my IT guy tells me that it just can't happen because a Linux download server uses a different protocol. But, I could be wrong...
View 7 Replies View RelatedIn the end, with much gnashing of my teeth, I just started over and created a new 4gb flash. And, as one helper told me, it was truly easier a second go around. Not quick, mind you, but easier Now that I've got my flash somewhat stable, I'd like to know how to make a mirror image 'clone' of this flash to another, just like it. Between my Broadcom drivers, nVidea drivers, updates and flash/java, I've gotten pretty protective of this little flash drive! I've head 'dd' will do it, but, as a newb, is their an application or tool that might make the job easier.
View 2 Replies View RelatedAt the Get Slackware page at the Slackware website it gives a list of addresses which when I click one of the addresses it redirects to another page with a list of mirror images. Which address and which mirror image do I need to work with Kubuntu 11.04 on my netbook so I can create a USB startup disk? With my connection speed these mirror image downloads take about an hour and a half and I cannot just be guessing which mirror image to download.
View 8 Replies View RelatedI was just wondering why my Dual-core Processor shows basically a mirror image where CPU core loads cross. On something like a file transfer, shouldn't they both be at the same level?
View 1 Replies View RelatedI'm using an Intel chipset GMA4500 and Ubuntu 10.04 Gnome. The monitor configuration tool does not seem to have an option to make the secondary screen a mirror image of the primary screen. It works fine when I connect my TV using HDMI as a second screen, but I want it to be a mirror of the primary, because some apps like Skype will only go "full screen" on the primary display.
View 2 Replies View RelatedopenSUSE 11.2 i586, ASUS P3-P5G43 Rev. R1.04G Intel Core2 Duo CPU E8400@3.00GHz, Intel G45/G43 Chipset The Problem: The screen is for the WSXGA+ (1680x1050) standard. This resolution was detected, at the initial install and later with sax2. It shows the desktop with a 1 inch wide black area along the right border of the screen and that is exactly what is missing at the left border (i.e. invisible). It is like the desktop is shifted to the left of the screen. As far as it is visible the image is crisp and clean. Lowering the resolution to 1280x960 works ok, but the aspect ratio is no longer correct. I have checked the archives and found Intel integrated graphics - openSUSE Forums but trying different hints from the thread did not help.
[Code]...
I have a rather large image that I want to print onto several pages. How would you recommend doing this? I've been copying sections and printing like that using GIMP, and I have had limited success using presentation type software, but is there a faster way of doing this?
edit #1: Being able to Print this to PDF or PS would be great.
(Office computer runs slightly modified version of ubuntu 10.04-LTS 32bit)
I did a perl/cgi script for uploading image. The script works, image is iploaded in upload directory, but the problem is: How can I to load and show image in web page?
View 12 Replies View RelatedRunning Centos 5.5. Man page for X ( General information: X(7) ) is missing. Others like Xorg(1) and Xserver(1x) are present.
View 9 Replies View RelatedWhere can I find the wallpaper that is similar to the image in the Debian home page. Not the one in the smaller windows (in the image), but the part of the image which has "The universal operating system" written.
View 6 Replies View RelatedI can get a dynamic image to display in my webpage<td><img src="<? echo image.php" ;?>"where image.php is some ones example that outputs some characters to screen.All works fineBut the site is ssl,and It wont load the "foreign" object for security reasons.I was wondering I cURL could trick the browser into thinking that the image source is still on the same serverlike
<?php
$remote = 'https://example.com/image.php';
curl_setopt($ch, CURL_SSL_VERIFYPEER,0); // for testing
[code]....
One of my favorite features of fire fox is the page zoom ( ctrl + / ctrl - ) that zooms the entire page retaining the layout how ever when I installed 10.04 on my main desktop firefox started scaling the images very poorly ( ie no smoothing, leaving the image looking extremely pixelated ).All threads I've found on the subject seems to related to ubuntu 8, and suggest that a bug fix was underway... hopefully this means there is an easy fix - but what?info;Same computer it worked fine on ubuntu 9.xx and windows 7 - when doing desktop zoom (meta + mouse scroll ) the images also scales as expected.
View 7 Replies View RelatedI configured my printer via YaST (Suse 11.3). YaST finds my printer and offers me the Gutenprint driver: Epson Stylus D120 with driver Epson Stylus D120 - CUPS+Gutenprint v5.2.4 I selected this driver and finished the configuration.
The problem now is, that if I print something, the printer only prints a totally black page. How can I solve this? Should I use another driver?
PS: With Suse 11.2 and Gutenprint driver it worked.
I installed the 64-bit version of OpenSUSE 11.4 last week and tried to print from it today. I couldn't get anything to come out. I've tried both USB and network printing, and nothing ever works. Any attempt to print anything results in the HPLIP Status Service app telling me the job is "completed" immediately, with nothing printed, but the CUPS web interface reports "/usr/lib/cups/filter/hpcups failed".
It's connected to the network router and hp-setup discovers it when I use manual discovery and give it the IP address, but it still won't print even a test page, whether as root or as a user. I've also used the CUPS web interface to add my user to the list of users allowed to print, and added my user to the lp group. But I still get the same error and nothing ever prints.
I have an HP Printer which prints black horizontal lines after each line or colors an entire blank line black, so a blank page will come out all black. Others who have access to the Printer are able to print well, without any problem.
View 1 Replies View RelatedI have openSUSE 11.2 and printer Brother HL-2040 connected to my openSUSE laptop. It was correctly recognized by manufacturer and model and was "automagically" installed by downloading the appropriate driver. Whenever I click "print" its name correctly appears on the page on which you choose where to send the print jobs to. And when I click "print" it prints... empty pages. When I chose to print the test page, 10 empty pages came out.
This printer worked just fine under Ubuntu 9.04 and winXP. I read the topic here about HL-2040 in openSUSE 11.2 using the driver of 2060 but upon checking both the printer config page and CUPS web admin page it was confirmed that the driver is actually the correct required one, HL-2060 Foomatic/Postscript.
I made a BIG mistake and tried to print a PDF document from Evince 2.28.2. Evince sends a garbage filled print job to the queue that results in nothing but garbage being printed. I noted the problem an tried to kill the print job but could not because it does not show up in the print queue. It appears that the printer sent an error back to the print system and the print system now continues to print the job forever - that is, anytime openSUSE is running, even after reboots.
Note that printing the test page works and that the printer also works fine with gedit and OpenOffice.
If I go to Control Center -> Printing then right click on the icon for the printer and click View Print Queue, the print queue is empty.
In YaST Control Center -> Printer -> Policies the "Specify error policy" is set to "abort and delete the job and proceed with the next job." The "Apply this error policy to all local printer configurations" checkbox was checked when this policy was set. If this is what should have ultimately killed the job it did not work.
how to stop the print system from trying to print this garbaged print job. It has been trying to print the same garbaged print job for the last five days!
When I shutdown the PC there is a page of data itemising actions taken, but it is there and gone before I get the chance to read it. Is there any way to preserve this to a txt file to read at the next power up?
View 2 Replies View RelatedWhen I print a form in PDF format the top 5 or so inches of the page is missing, when I view the page in Print preview the top of the page is not showing either. I need to print and send away this form asap. I just seen the bottom 5 inches of the page is missing as well
View 1 Replies View Related