I have an HP Printer which prints black horizontal lines after each line or colors an entire blank line black, so a blank page will come out all black. Others who have access to the Printer are able to print well, without any problem.
View 1 Repliesi have an dedll inspiron 8600 laptop. i just installed the new ubuntu, 11.0.4 i think. i installed from a usb. in the installation i wiped the whole drive with no partitions. i booted it while connected to the Internet and it loaded updates as it went. as far i know, everything went just as it was supposed to. the new os seems to be behaving just as it should.
however, (always a catch, right?) now, the right third of my screen appears to have thin black Phoenician blinds from top to bottom.
i can still partially see the icons in the top right corner, but not well enough to use them really, but they are active. i tried rebooting, but it didn't help.
i promised my girlfriend that this would make our dog poo machine run great and we could get more work done faster. i really hope i didn't make a mistake. the dog house gets me claustrophobic.
I configured my printer via YaST (Suse 11.3). YaST finds my printer and offers me the Gutenprint driver: Epson Stylus D120 with driver Epson Stylus D120 - CUPS+Gutenprint v5.2.4 I selected this driver and finished the configuration.
The problem now is, that if I print something, the printer only prints a totally black page. How can I solve this? Should I use another driver?
PS: With Suse 11.2 and Gutenprint driver it worked.
I have a parallel port printer connected using usb->parallel adapter. Sometimes the printer prints sometimes it doesn't.
A job will go the print queue and then sit there for ages. Sometimes if I unplug and then replug the usb->parallel cable the printer will print other times it will print half the document then freeze until the cable was unplugged and replugged again.
The printer never shows up in the list using lsusb (only my usb mouse and scanner do).
The printer is an hp deskjet 690c and worked fine under WinXP through a normal parallel cable. The one thing I haven't tested (but will test tomorrow) is the usb->parallel cable in XP.
I have weird graphical glitches in Gnome 3. They appeared in RC3 and now appear in the final release, but they didn't appear in beta. Here's what they look like, there are horizontal white lines appearing in different places where they shouldn't appear:
[URL[
it can be a result of this bug:[URL] but my glitches look different than the ones in there.
I have a Mobility Radeon HD 5650 video card. Should I just update my system regularly and hope it gets fixed, or is there some way to fix it by tweaking some settings or stuff? Maybe by installing the official ATI drivers? I'm not sure, but I've read somewhere that the official drivers don't work well with Gnome 3, is that true?
I have an e-machines computer model EL1200-05w, I believe my Graphics card is a 6150SE, what happens is that often about 3 or 4 times a day my computer displays horizontal stripes and the computer freezes completely and have to shut down the computer manually, this does not happen on Windows and have tried Fedora and Kubuntu with no avail, I do not know if it's a Kernel Issue or the graphics card. I have searched extensively and have found nothing. I'm using Ubuntu Lucid Linx by the way.
View 6 Replies View RelatedI'm having a problem watching TV on Ubuntu. The video has horizontal lines where there are motions on the video:
Do you know how to get rid of that? I'm using Me TV, and I selected all different deinterlacing types: None | Standard | tvtime but I didn't see any difference.
I on my computer when my monitor had lines on it and my speakers made odd sounds. The computer is 10 years old. It started this 3 months ago.
Compaq deskpro EN
Pentium !!! processor 996mhz
20 GB hard drive
Ubuntu 11.04
Relisys CRT monitor
Intel video and sound cards
It gets worse when I put my phone close to the screen (Motorola Razr V3v).
I'm having video issues with my graphic card while using Ubuntu 10.04 LTS 32 bits. When I'm watching video (Either on ....., or a dvd or whatever) There are horizontal lines cutting the video, like when there's very fast movement it doesn't render the video smoothly and so I get to see like vertical divisions, I don't know how to explain it exactly. I have a driver installed, one that installed automatically when I turned normal effects on, but I don't even know which one it is, I'm very new to this.
View 2 Replies View RelatedI'm experiencing occasional flickering of horizontal lines during DVD playback. Another thread suggested turning off the de-interlacing but it is already turned off and turning it on doesn't change anything.
I have an AMD 64x2 4200+ with 3GB RAM running Ubuntu 9.10 64 with on board nVidia 6150SE video. It doesn't seem to matter which player I use (MPlayer, Movie Player, VLC, etc.), so I'm wondering if it may be some sort of video configuration problem.
I just got the new kernel update (2.6.32-24-generic, according to "uname -r"), and I went to restart my computer as the system requested. When I selected the new kernel from the boot menu, the Ubuntu splash screen came up, and then it did this subtle alternating shades of purple horizontal line thing. Then a vertical line appeared towards the right of the screen, and then everything faded into this cloudy, bright white splotchy...thing.
The keyboard was still responsive, and hitting ctrl+alt+delete restarted the machine, at which point I tried to replicate the problem, but everything loaded normally this time. My questions are: What the heck happened? Why? Is it dangerous? Why or why not? My machine is a Dell Inspiron 1501, 2 GB RAM, 120 GB hard drive, ATI integrated graphics, AMD 64 Anthlon X2 processor. I'm dual booting with Windows 7 as I learn Linux.
I've just done a clean install of 10.04.01 (64bit) and am having a few issues with the Nouveau driver.
1. I'm getting a series of horizontal lines across the screen ( image).
2. I'm getting, what appear to be, GPU lockups. This appears to happen after an amount of browsing and rendering images.
My system setup is:
10.04.01 LTS
grep 'Monitor name' /var/log/Xorg.0.log
(II) NOUVEAU(0): Monitor name: EA231WMi
VGA compatible controller: nVidia Corporation G71 [GeForce 7300 GS] (rev a1)
I have a HP Compaq nx9010 laptop with 1 gig of memory and 128mb being dedicated to video memory. The graphics chip is ATI Radeon IGP 345M.
I can only set my resolution to 1024 X768. If I try to change it to any other size or try to play any games, the video has millions of jerky horizontal lines going through it. If I hookup an external monitor the video works just fine. Being new to linux and even newer to installing on it laptops, can anyone tell me what if any thing can be done to correct this. I am running Ubuntu 10.4 LTS.
I have my Epson C46 working on my Ubuntu 9.10 machine, my XP machines are showing the printer as ready and will send a test page to the Ubuntu printer but it doesn't arrive at Ubuntu - doesn't show in the print job list on Ubuntu but does in XP??
File sharing is now working in both directions.
I have an HP J4680 all in one that, for some reason, does not process the print job immediately when I send it. When I open my printer's properties it will list the printer's state as idle and when I go into the print que it tells me the job is scheduled for . . . (some time) which is, I think, about 5 min later by the clock on the task bar. I've been all over the settings and don't see anything that looks like it applies to that. Usually I've been restarting the printer and computer and then it will print when I send the job. Tonight I waited until the time and it did print according to the scheduled time. I need to find a way to always have it print right when I send the job.
View 2 Replies View RelatedWe have an HP F4135 printer which has worked fine for at least 2 years, now, but it has started acting up since installing Ubuntu on our computers.
We had been running Windows XP on the computer to which the printer was connected, but ever since we "upgraded" to Ubuntu the printer has been printing green in place of black whenever using it to print any sort of document from Firefox. This isn't black mixed with green; it's a bright, lime green.
For some reason, it works fine when it's printing something directly from the computer's hard drive, like a document, .pdf file, etc. It's only when printing from Firefox that it starts messing up, whether it be a file opened temporarily from a website or the direct contents of a web page.
We've tried adjusting the printer settings and the only thing that makes a difference is changing the Printout Mode from Normal (Color Cartridge) to Normal Grayscale (Black Cartridge). This seems to be the only thing to stop it from printing in green, but that really isn't a good fix, since it makes all the other colors turn to black, which isn't really fixing the problem.
I'm running a standard 13.1 32 bit install with an HP deskjet 990C, run off of USB. Until today everything has printed properly. Now nothing prints. Nothing has been installed unless it came through slackpkg, and yes it is still on the correct setting for arch and revision. CUPS shows printer as installed, accepting jobs an idle. No error messages are appearing but nothing is reaching the printer. The info I can glean is from the error logs in CUPS:
[Code]....
All seems well in Ubuntu printer setup and drivers. Cups, hpijs hplip etc., system finds printer and sets it up and from system/administration/printing the printer shows up with the right description Hp deskjet d2600 on local host. when I try to print I get message "started job" and another message "finished job" but nothing prints. The log Var/log/cups/error_log shows only one thing that I think is wrong "cupsd authorize:no authentication data provided". my user name john and one other Andy (I installed) show up in lp group. I could attach the whole error_log file if it would help. I am new to Linux but love it. I used Windows NT for years. I am the administrator on the box. Don't know what to try next.
View 11 Replies View RelatedI have successfully gotten my Canon MX300 Printer to work with CUPS. The printer works great, but for some reason it prints out white lines incredibly slow. The printer acts as if it is printing out actual text, e.g. if I have half a page of empty space, it prints it line by line for some reason... Anyone know what may cause this? I know that CUPS is not ideal with all printers, but it did not do this at first actually.
View 2 Replies View RelatedJust recently got a few printers connected to the network at my shop and I've managed to get them connected in with samba for the linux clients. Whenever I try to print from one of the clients, the printer will click on and whiz away, but only prints on the first page stuff that looks like this:
Code:
%!PS-Adobe-3.0
%%BoundingBox: 38 24 574 768
%%Title: Enscript Outpu
%%For: User N
It seems to me that the printer isn't processing the postscript data properly (or I'm just not sending it in the right format) but I'm at a loss as to how to go about fixing it.
I decided I wanted to give ubuntu a go by installing it on a 4GB USB drive.
I installed it using this guide url.
I booted up and it hung on the 'mounting file system', I left it for ages and eventually it goes to a black screen and prints out an error message, I can't type anything on my keyboard.
I've got an older graphics card I'm trying to use. It actually runs fine through the bios and even works when fedora is loading. But once fedora finishes loading half the screen turns into thousands of multicolored horizontal lines.
View 4 Replies View RelatedI've encountered some problem in setting my printer HP D1560; the printer pulls in paper but prints no image. how to set it running under WinXP?
View 5 Replies View RelatedI have 2 pc connected to a HP officejet j6480 1 pc connect by usb the other is eth via a router. The eth pc will not print anything but a test page. It it open a print box but won't give a option to print. The other pc is also on the same router. USB print fine.
View 1 Replies View RelatedI'm using Ubuntu 10.04, and I have an HP D1660 printer. The printer has already been added, and HPLIP is installed. I can't get anything to actually come out of the printer, even though I can send a job to the printer. Does this have anything to do with CUPS?
Here are some of the last error log messages after using the printer troubleshooter (I only included some because it's a long list):
I am doing a new install of i86_64 on a system with a wide 22" monitor. The initial screen displays fine but after selecting "new install" the monitor becomes alternating black and white horizontal bands. the cursor is visible and tracks the mouse. The monitor is an Acer with fixed 37kHz horiz x 60 Hz vert. I assume that the gui is using a fixed (and different ) set of frequencies and is not plug-n-play. I just finished an i386 32 bit installation on another machine which went without a hitch.
View 4 Replies View RelatedOnce I select Ubuntu 9.10 from Grub, it shows the logo, the logo disappears, a jet black screen shows with 2 horizontal white dashes appear at the top.
I recently uninstalled Firefox 3.6 pre using synaptic to go with the stable Firefox 3.6 installed with the PPA repository that was given in the Ubuntu wiki. It installed and ran fine but when I rebooted, ubuntu wouldn't start.
I went into recovery mode a few times, tried to fix any broken packages and when it said it was fixed, I tried rebooting and the same error occurred. I also tried to use dpkg-reconfigure for the xserver-xorg and then ran startx but x didn't load properly. Some more debugging and a few driver errors came up involving intel so I installed a package which fixed that.
Ran the dpkg-reconfigure again and ran startx. This time x loaded but it was a jet black screen and I had to hold ctrl + alt and hit a few F keys to get back to the prompt.
I understand this could be a xulrunner error so I tried reinstalling xulrunner-1.9.1. I also rolled back my repositories to get the Firefox 3.5 branch and I installed the original Firefox 3.5, ran firefox --version to make sure and I finally have that back installed.
I tried rebooting and running the OS normally, but again it failed at the same point. What exactly should I do next? Yes, I could reinstall but it's such a small problem with maybe 1 or 2 broken packages, is there anyway I can save my current ubuntu system (as I have made countless configuration changes months ago and I do not want to do it again)?
I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. Does anyone know if this is normal or if there is a fix. I have the printer connected with a USB cable.
View 2 Replies View RelatedI'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...
KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).
Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).
It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.
So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...
Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...
I have been experiencing a problem where the screen loads and after initial first few lines breaks up into multiple repetitions of lines. Reloading helps but has to be repeated when pageing down. Mail is no problem; it is supplied by my network provider. OS is openSUSE 11.2 which I update when advised. Below is a sample from the error console:
[Code]...