Hardware :: HP Deskjet 940c On Linksys Printserver Prints Alternating Good Page And Bad Page
Mar 9, 2011
I have a problem printing to my HP printer.
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
View 2 Replies
ADVERTISEMENT
May 19, 2014
I'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...
KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).
Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).
It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.
So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...
Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...
View 0 Replies
View Related
Oct 18, 2010
I've installed Ubuntu 10.10 on an old box to use as an office print/fax and file server. I tried the server edition but I had no chance with command line programming so I've just used normal Ubuntu.
Ubuntu itself is working fine and I've installed my HP Officejet printer and it's fully working on the Ubuntu box. SAMBA and CUPS are installed.
I've then added the printer onto my Vista machine and here's where the fun starts. The Vista box sees the printer on Ubuntu, adds it with no problem and happily prints test pages, but I can't get it printing anything else.
I can't for the life of me find any reason why it would print a test page, but not print from Word, adobe or even a browser.
View 3 Replies
View Related
Jul 22, 2009
I have 2 pc connected to a HP officejet j6480 1 pc connect by usb the other is eth via a router. The eth pc will not print anything but a test page. It it open a print box but won't give a option to print. The other pc is also on the same router. USB print fine.
View 1 Replies
View Related
Jan 19, 2010
I have two different ways to print to my HPOfficejet Pro 8500. They look like two different printers to the software.
When I attempt to print a PDF file one of these prints a mirror image; the other cuts approximately 1/2 inch from the top of the page.
OpenOffice.org files appear to print without problems.
I have openSUSE 11.2 and HPLIP 3.9.8
View 3 Replies
View Related
May 15, 2010
I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. Does anyone know if this is normal or if there is a fix. I have the printer connected with a USB cable.
View 2 Replies
View Related
Apr 19, 2011
[i use Ubuntu linux 10.04 LTS - the Lucid Lynx] i tried to print a document and i got the following message from the "document print status (my jobs)": "There was a problem processing document 'take it easy' (job 400)" i tried to print other things but i got the same error. after any print request i sent the printer asked me to release the paper it took, and when i release it, it printed this:"Unable to open the initial device, quitting." i have "HP Device Manager" installed on my computer, and lately i tried to install a wireless printer (officejet 4500 g510n-z) through it, and it failed because the connection between the printer and my computer disconnected before the terminal finished the installation. i didn't try to print with the deskjet right after it but now when i try- it doesn't work, so it might have something to do with my current problem... also when i looked at the HP Device Manager i saw the deskjet printer icon marked with X so i used this program's option "Setup Device" and the X mark disappeared.. and it still doesn't work.
View 2 Replies
View Related
Nov 23, 2009
On FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies
View Related
Oct 12, 2010
i am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
View 4 Replies
View Related
May 10, 2010
How can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies
View Related
Jun 8, 2009
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies
View Related
Jul 11, 2010
10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864
My settings are:
Proportional: serif 14
Serif: Times New Roman
Sans serif: Arial
Monospace: Courier New 14
View 1 Replies
View Related
Jul 26, 2010
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
View 2 Replies
View Related
May 8, 2009
wanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !
View 8 Replies
View Related
Mar 26, 2011
Can anyone tell me how to name Page up & Page down buttons in global-keybindings to use the custom commands with these buttons?
View 1 Replies
View Related
Jul 6, 2011
I want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
View 3 Replies
View Related
Aug 11, 2011
Vim: substitute for Page Up and Page Down keys?
View 4 Replies
View Related
Aug 14, 2010
When I boot slackware, I have all the boot process that run but too fast. I don't have time to read what's running. Is there a way to to go page by page. I didn't find any key in my keyboard to stop and go.
View 16 Replies
View Related
Jun 9, 2011
I want to write a script that keeps "grepping" strings from the Main page of the Linksys PAP2T every 30 seconds.It seems to be simple:1- lynx -auth=user:password URL2- grep the strings3- process themthe problem is that the page is writed in PHP and Lynx does not clear the authentication credentials with a 401 server response!w3m works.. but I don't know how to set the autologin and how to export the page to a text.With firefox.. I can set the home page as but it ask if it can continue before sending the data.. how can I force it and how can I obtain a text from it?I don't know.
View 1 Replies
View Related
Mar 14, 2011
I'm running a standard 13.1 32 bit install with an HP deskjet 990C, run off of USB. Until today everything has printed properly. Now nothing prints. Nothing has been installed unless it came through slackpkg, and yes it is still on the correct setting for arch and revision. CUPS shows printer as installed, accepting jobs an idle. No error messages are appearing but nothing is reaching the printer. The info I can glean is from the error logs in CUPS:
[Code]....
View 4 Replies
View Related
Aug 8, 2010
I was trying to print my resume and a job application with my printer and it was coming out red (I now know how to fix that) but I decided to install the hp linux printer driver and it picked up my printer installed everything for it (its a hp deskjet f2100 series) and now it wont print ! I've got a troubleshoot.txt file for any technical info if you need it. (I had to compress it but its a 80 kb text file).
View 8 Replies
View Related
Jun 5, 2010
I have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
View 5 Replies
View Related
Feb 1, 2010
I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies
View Related
Aug 22, 2010
Just got back to attempting to play with 10.04 using its Live CD. It consistently goes to the "Log In" page and not the Live CD page on running. I saw a Post specifying a F key to be pressed on boot-up to get to the desired starting point some time ago, but did not write it down. Some advice did say press Any Key but this does not seem to do the job. Tried to use the search function here but no joy. Can anyone remember which F key? Note that as a check, I tried to use 9.10 Live CD and this worked fine, so it is not a machine problem.
View 2 Replies
View Related
Sep 24, 2009
I was able to set up my printer using a guide i found on this site. However when i print a page from my e-mail account, for example. It will either print the whole page with advertisements and all when i select print from the file menu up top or it will only print what is showing on the screen and cut off the rest of the words in the e-mail that are not showing on the screen, when i select print icon within the e-mail.
View 3 Replies
View Related
Dec 18, 2009
This is a new box. Just finished installing the OS. I was now fiddling around to setup the box and found following problem;Minimizing the webpage won't sink it to the bottom bar, just closing it. (including the text editor)Immediately after installation I don't have this problem. Now on clinking the "min" tab of the webpage/text editor I can't find them on the bottom bar as tab. Please advise how to fix this problem.
View 1 Replies
View Related
Oct 19, 2010
i have install php and make proper confgiuration as said in various books and forums.but |all what i gotis just blankpage which means it knows that thereis the file at given folder but it cannotexecute.
View 1 Replies
View Related
Aug 1, 2011
I have a question about Open Suse and Mysql. Why is there no page on the MySQL 5.5 or an rpm for somewhere to open suse.
View 6 Replies
View Related
Mar 13, 2010
Something happened with my Ubuntu installation - when it reaches to the "login" "password" screen it gives the message in the upper corner that the power management has not been installed properly. So, when I try to login, it throws me back to the login screen. This happens with every prevous installation available from GRUB menu: "! Install Problem.The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact administrator."
The Recovery mode seems to work perfectly well, however it puts me in a dos prompt screen, from which I do not know how to operate.I believe one possible reason for this to happen is that my Hard Disk where Ubuntu is installed, altogether with the SWAP disc which ubuntu uses, are completely full. I tried to free some space through my installation of Vista, but the program Ext2fsd does not enable me to see the content on my ext3 drives, only shows first level directory structure (the foldrs appear "empty" under Vista.
Could someone help me with a "magical" command line that I can type in recovery mode please...so that I free some space from my /user/videos directory (I dont mind it wiped out completely) and also all "wine" installations, that I can also wipe out. If the reason of Ubuntu not continuing beyond login screen is space, I do not mind anything that can free some space somehow and enable it to start.
View 9 Replies
View Related
Mar 29, 2010
Does anyone know of any (GNU) software that can scan in letters that have been typed, and encode the text to unicode/ASCII/etc. I've looked for "Handrwriting recognition" (figuring if some software can interpret handwriting it could interpret typewriter text) in the Ubuntu software center and on an internet search, but all the hits are for tablet and stylus type programs.
View 1 Replies
View Related
