OpenSUSE Hardware :: Missing Mouse Image On Screen?

Dec 16, 2009

Sometimes my mouse image on the screen stops showing. The mouse itself does still work and I can highlight an icon and click it. Just the image is missing and it makes it difficult to know where you are.

View 1 Replies


ADVERTISEMENT

OpenSUSE Install :: Frozen Mouse Cursor Image After Screen Power Off?

Sep 15, 2010

I run a HTPC which I recently upgraded 11.2 -> 11.3.Most things work fine but I've got an oddity. After the TV is shut down and restored the mouse cursor is "frozen":The old mouse image stays where it isHowever, the mouse IS active, in that you can (blindly) move the mouse, see it mouse-over widgets, and activate them - there's just no visible cursor where the hotspot is.Hardware is ATI chipset (can't remember which, offhand, but it's only a year or two old), running AMD driver, with a HDMI link to the TV.

View 2 Replies View Related

OpenSUSE :: Mouse Over Image Preview For Movie Files KDE4

Jun 16, 2011

time ago when KDE 3.5 was still "the hype" konqueror file browser used to show a image of a frame of the video files when the mouse was over a selected video file.Is it possible to enable/install this functionality on Dolphin or the neutered Konqueror in KDE4?

View 6 Replies View Related

OpenSUSE Hardware :: Prints Mirror Image Or Top 1/2 Inch Of Page Missing?

Jan 19, 2010

I have two different ways to print to my HPOfficejet Pro 8500. They look like two different printers to the software.

When I attempt to print a PDF file one of these prints a mirror image; the other cuts approximately 1/2 inch from the top of the page.

OpenOffice.org files appear to print without problems.

I have openSUSE 11.2 and HPLIP 3.9.8

View 3 Replies View Related

OpenSUSE Install :: Get Black Screen With Just Mouse Pointer

Dec 9, 2009

I've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.

View 2 Replies View Related

OpenSUSE Install :: Blank Screen & Mouse After Bootup

Jul 18, 2010

I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.

I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.

View 9 Replies View Related

OpenSUSE Install :: 11.3 - Screen Freezes Completely (but Mouse Is Moving)?

Aug 26, 2010

Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.

If I try it again, it crashes at the same point.

View 4 Replies View Related

OpenSUSE Install :: Logging In - Get The Black Screen With Just The Mouse Pointer

May 7, 2011

I have Open Suse 11.3. I normally use GNOME or KDE sessions. Yesterday I was just thought of trying other Desktop Environments. so I logged out to choose a different session. I tried LXDE and logged back out. After that I found "metacity" in the sessions list and tried it. But no desktop appeared. All I got is black screen a with the mouse pointer/cursor. I waited for quite some time but no desktop, panel, etc loaded or was visible.

I could not figure out how to log off so I hit the start button. After reboot the system automatically chose the same session (It always reuses the last used session) and I was in the same sticky situation. I tried starting in Safe mode as well but still I get the same black screen with just the mouse pointer.

View 6 Replies View Related

OpenSUSE Install :: Multiple Login From Screen / Keyboard And Mouse?

Jul 9, 2011

I know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.

View 2 Replies View Related

OpenSUSE :: Desktop Cube Switch With Mouse Cursor On Screen Edge?

Mar 29, 2011

In KDE I'm using KWin as windows manager and somewhere in the configuration I defined that KDE should rotate the desktop cube to the left or the right each time I move my mouse pointer to the far left or right of the screen.If I keep it there for about a second it rotates the desktop cube to the next desktop.I once activated this but find this very frustrating when I'm trying to reach buttons on the same side. So I want to disable this feature but I can't find it anywhere. I can't remember where that option was that activated this feature.

View 3 Replies View Related

Fedora Installation :: When You Reboot The Mouse Works Ok Until The Welcome Screen Apears Then The Mouse Stops Working?

Jun 17, 2009

I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports

View 4 Replies View Related

OpenSUSE Hardware :: My Xbox 360 Controller Controls The Mouse - The Cursor Moves All Around The Screen?

May 27, 2009

I am using a wireless Xbox 360 controller with openSUSE 11.1. I use it for some emulators and all buttons work fine. There is however an annoying problem, the Xbox controller left joystick controls the cursor and digital pad acts as mouse buttons. So while I play, the cursor moves all around the screen and bad things could happen. Why this behavior? In xorg.conf there seems to be only just 1 mouse. And if I go in Joystick via YaST, there is only a menu to select which joystick I have. But my wireless controller has been automatically detected, I didn't setup anything. Is there a config file that I can modify to stop controlling the mouse with my gamepad?

View 6 Replies View Related

OpenSUSE Install :: Boots To Blank Screen - Byobu Launch Missing

Jun 15, 2011

I've just done a clean install of 11.4 from a Net install CD. I left it unattended while it installed, and came back to find a blank screen with just an xterm. I've rebooted it, and tried both the normal and the failsafe modes, but I just get the same result. The terminal contains the following:

[code]...

View 6 Replies View Related

OpenSUSE Hardware :: Screen Moves To The Left, Leaves Black Band... But Mouse Is Working On Absolute Places?

Oct 22, 2010

I have a Dell Vostro 1220, with Intel 4 Series Express Chipset Family graphics card. I work on OpenSuse 11.3 (64bit), on the latest kde.I work on an extended 1680x1050 screen on the left of my laptop screen (1280x800). I set this with Kxrandr and it worked great,a while... Now, it shows a black band on the right side of my laptop screen. I can live with that. But the mouse does not recalculate for this difference, so that I need to click 1 inch to the right of where I want to click.

View 2 Replies View Related

Ubuntu Installation :: 10.10 Image Not Loading - Flash Screen On Blank Screen

Dec 26, 2010

Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.

View 9 Replies View Related

Ubuntu :: Black Screen And Mouse Arrow After Long Screen Saver Shutdown?

Jun 25, 2011

I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?

View 4 Replies View Related

Ubuntu :: Stuck On Black Screen With (mouse) Cursor After Grub And A Purple Screen?

Jul 21, 2011

I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition

10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.

Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.

Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.

This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.

Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.

Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.

View 1 Replies View Related

CentOS 5 :: PATCH Missing ISO 9660 Image

Jan 29, 2011

From last few days i stuck with error in installing CentOS 5.5 ISO using USB stick, I have customized ISO from cent os tree 5.5 and update.(customization with respect to the package removing like openoffice, X-window, Gnome ...)

Here are some details

anaconda : anaconda-11.1.2.209-1.el5.centos
kernel : kernel-2.6.18-194.26.1.el5

View 1 Replies View Related

Ubuntu :: Make An Image Zoom A Little When The Mouse Hovers Over The Picture?

Apr 11, 2010

i was wondering if anyone could tell me how i can make an image zoom a little when the mouse hovers over the picture, i would apreciate any help however i need to do this in either javascript or html.

View 5 Replies View Related

General :: Mouse Cursor Strange Background Image Showing

Jan 5, 2010

My mouse cursor has acquired some strange background image showing what looks to be paragraphs of chinese glyphs (they are too small to make out clearly). This background image is contained in rougly a 1 inch square with the mouse cursor hot spot in the upper left-hand corner. The mouse cursor is visible, but whatever is under those glyphs is covered.

I've tried the mouse configuration gui -- but it says nothing of background images for the mouse. I've also deleted and recreated my xconfig.org file to see if that somehow got mangled. I've been searching the web for a couple of hours, but cant seem to find anything related to my problem.

View 1 Replies View Related

Ubuntu :: Desktop Screen Position - .The Top Bar Of Any Screen Image Is Just Off The Top?

May 20, 2010

I am very happy with Ubuntu 10.04 that I downloaded, burnt to CD and installed (I am a newbie to Linux), but I am finding a little problem on an old Sony lap-top, with a rather old-fashioned almost square screen.The top bar of any screen image is just off the top, and I can only see a quarter of it, which makes using the max/min and cancel buttons a bit hard to use. I know I can resize the screen, but it goes back to the original next time it is used. Is there a permanent fix?

View 1 Replies View Related

Fedora Installation :: F11 Missing Background Image During RHGB

Oct 6, 2009

I just upgraded a F9 to F11 using the network install. After the successful install message, I rebooted to find the boot stuck on a grub prompt. After determining that somehow grub had not been installed properly, I used the rescue mode to re-install grub. When I then rebooted, I saw a blank (black) screen during the rhgb sequence, with just the multicolor progress bar moving from left to right. As the bar reached the right side, the standard F11 login screen appeared. The system is an old Omnibook 8000 laptop. Here is my grub.conf

Code:
# grub.conf generated by anaconda
Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
# initrd /initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.30.8-64.fc11.i586)
root (hd0,0)
kernel /vmlinuz-2.6.30.8-64.fc11.i586 ro root=UUID=9b55f5fd-a5d3-4408-8db7-0c64b0f6a7fa rhgb quiet
initrd /initrd-2.6.30.8-64.fc11.i586.img

View 2 Replies View Related

Fedora Installation :: Missing Exe Or .iso Image Download From Internet?

Sep 28, 2010

my hardware configure is 1gb ram,partition of hdd is c:25gb,d:80gb,e:80gb,windows xp 32 bit ,p4 2.70ghz processorI have download fedora 13 two times from the Internet. First ----Fedora-13-i686-live in winrar (675mb) when I extract winrar Fedora-13-i686-liveAfter Then in the new folder of Fedora-13-i686-live (675mb) some new file & folder are display.This file and folder are- (EFI , isolinux , liveos) Folder & files are GPL.Second --- using the bit torrent--- I have download Fedora-13-i386-DVD winrar (3.05GB) & a file Fedora-13-i386-DVD-CHECKSUM In the winrar to be extract there is a new Fedora-13-i386-DVD(3.07GB) folder is display. In this folder some file & folder are display.

the folder are (EFI,IMAGES,ISOLINUX,PACKAGES,REPODATA) & files are(.discinfo 1kb,.treeinfo 2kb,gpl 18kb,media.repo 1kb,RPM-GPG-KEY-fedora 0kb,RPM-GPG-KEY-fedora-13-primary 2kb,RPM-GPG-KEY-fedora-13-SPARC 4kb,RPM-GPG-KEY-fedora-i386 0kb,RPM-GPG-KEY-fedora-sparc 0kb,RPM-GPG-KEY-fedora-sparc64 0kb ,RPM-GPG-KEY-fedora-x86_64 0kb,TRANS.TBL 4kb)So my simple question is to you that where is the .exe of the fedora-13 or the fedora-i386-dvd.ISO image file in both the Internet download files

View 5 Replies View Related

Software :: Missing ISO 9660 Image Error Upgrading From USB

Jul 2, 2011

I have an Intel Core2 Duo system that is currently running the 32-bit version of Fedora 12. I want to upgrade the system to Fedora 14.I downloaded the DVD installation ISO for Fedora 14, and I used unetbootin on an 8 Gigabytes USB flash drive to created a bootable disk from the installation ISO.

When I boot off the USB drive, the installation process will run. I get to a screen concerning the boot loader. I use GRUB to dual boot the system between a Fedora and Windows 7.What is needed to resolve this issue so the installer can proceed properly and perform the upgrade?

View 2 Replies View Related

Ubuntu :: Mouse Pointer Animation Missing / Won't Activate

Jan 30, 2011

I recently downloaded the Vienna3 mouse cursor theme and there is an animation where it turns into some cool looking thing when I drag a window. but early this morning I noticed that it has stopped working. I also installed the "slick black" theme that I got from gnome-look.org the night before but I customized it to run the Vienna cursor theme. but that drag animation was still working. Additional info: I'm using Ubuntu 10.10 and compiz fusion and I have gtk 2 set as my decorator

View 1 Replies View Related

Server :: Content Of Desktop Is Missing And Menu Of RC Mouse Also?

Jul 4, 2011

in morning when i login into root..in desktop a window box seen. "Network Authentication" box.it prompt me to enter PASSWORD FOR Administrator@<WINDOW DOMAIN SERVER> and in red color a warning message is written as " your credential has been expired. in tab written "Renew Ticket" "cancel"... i entered password and clicked on Renew Ticket.. after that iam not getting mycomputer and other content of desktop...i cant go inside file server...in gnome cgi..

now how could i get into mycomputer..through gnome

View 4 Replies View Related

CentOS 5 Server :: Missing Desktop Icons And Right Click Of Mouse Not Working

Aug 29, 2011

iam using centos 5.4 and configured samba server and nfs server for fileserver.my problem is that when i login into root and saw desktop doesnot show any icon like computer ,trash , root home, and many others file which i saved in desktop.And also right click of mouse does not pop up menu.At the panel in side places there is "desktop" menu.but when i clicked on it , it gives error , files not found in its path. how to recover gnome desktop.or how can i get my desktop icon back...

View 1 Replies View Related

Fedora :: How To Change GDM And Lock Screen Image

Apr 20, 2009

To change the GDM image all you really have to do is right click on the desktop and hit "Change Desktop Background" and select the picture you want and then hit the "Make Default" button and both will change naturally. (The lock screen and GDM Login background)Then just switch it back to your usual desktop wallpaper and go on about your day.

View 5 Replies View Related

Debian :: TTY Screen Keeps Showing Some Msg About The USB Mouse?

Jan 27, 2011

When working in the TTY console, it keeps printing some message about my USB mouse. Those message are added to whatever I am doing. If I am writing a command line, it messes the line, but the command still gets interpreted correctly. Same thing if I am editing a file in vi: the display shows the message, but the file is not corrupted. Can I fix it? Should I file a bug report? Against which package? What info should I provide?

View 3 Replies View Related

Fedora :: Black Screen With Mouse Only

Mar 15, 2011

I have done three times clean install for this and still i can't find what causes it.
When i do my clean install and configure my installation, after reboot i can login.
I see the login splash and then, i see a black screen and the only thing i can do is open applications with ALT+F2 command and change TTYS to login as root and i can move my mouse pointer. When i startx with root everything works awesome... Probably i changed something i musn't... Can the option "start everytime with new session" cause it, if yes how can i fix it and if not what can i do?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved