I am wondering if it is possible to connect a Playstation 3 controller to OpenSUSE 11.2?
Is there any program or application that can do this, and if so what do I need in order to do this?
I was wondering is it possible to get a game controller like the Playstation or XBOX
for my computer?
I just tried installing OpenSUSE 11.1 onto my Playstation 3. I installed the otheros.bld fine (which I downloaded via a link provided on the OpenSUSE website). I then inserted my 32-bit Gnome CD for installation and restarted my system. Then on startup, a blue/grey screen appears. Here are the links to the screenshot (sorry for poor quality):
[Full Screen]
[url]
[Top Half]
[url]
[Bottom Half]
[url]
As you can see, the only option is for me to select the gameboot, which obviously takes me back to the Playstation XMB. There are keys at the bottom of the screen, but this is only to change the resolution. So I have no option to install the OS.
Does anybody know why this screen appears and have any ideas on how I can get around this problem to install SUSE onto my Playstation?
I have a Fedora Box with chillispot loaded for a captive protal wifi network. I am needing my office lan to connect to a controller on the WIFI network. I have tried many different firewall rules and have only momentarly able to ping something on the other network. here's some configuration info and my firewall rules that I thought should work.
FC 4
ETH0 - WAN (office lan 192.168.24.201/24)
ETH1 - LAN (brought up as 192.168.10.1/24)
tun0 - chilli 192.168.240.1
[Code].....
my setup
P4 3.4GHZ
2GB Ram
Gigabit Ethernet
Drive Configuration
1 x 750GB Sata
Connected To My Raid Controller in ide mode
1 x 120GB IDE HDD
1 x 250GB IDE HDD
my problem, I Am trying to install f12 and the only drive that it sees is the 750GB Sata,it is not seeing the other 2 ide drives The raid controller is an ite 8212 in ide mode The Bios Sees the drives just F12 doesnt
I installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:
Code:
$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
Here is information about the PCI devices available on the system:
Code:
$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
[code].....
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
I am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
[Code]...
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
I am using 9.10 and I am plugged in with my PS3's eye. I get perfect video but I can't manage to get sound. under volume control it shows up but when I speak the volume indicator is blank.
View 9 Replies View RelatedDoes someone have a ISO/image of the Playstation 2 linux cd ?
I can't seem to find it anywhere.
At the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
Sony plans to release a new Playstation 3 firmware update worldwide this week in hopes of combating potential software piracy. System update v3.21 will disable the console's "Install Other OS" feature, which allowed users to install the Linux operating system. The feature is currently only available in PlayStation 3 models released prior to the "slim" redesign that launched in September 2009. The update will go live on April 1. SCEA's corporate communications director Patrick Seybold notes on the PlayStation Blog the feature is being removed due to "security concerns."
"In addition, disabling the "Other OS" feature will help ensure that PS3 owners will continue to have access to the broad range of gaming and entertainment content from SCE and its content partners on a more secure system," Seybold wrote. Those who use Linux can choose not to upgrade, however, Sony lists several features that will no longer be available: Ability to sign in to PlayStation Network and use network features that require signing in to PlayStation Network, such as online features of PS3 games and chat Playback of PS3 software titles or Blu-ray Disc videos that require PS3 system software version 3.21 or later.Playback of copyright-protected videos that are stored on a media server (when DTCP-IP is enabled under Settings) Use of new features and improvements that are available on PS3 system software 3.21 or later."For those PS3 users who are currently using the "Other OS" feature but choose to install the system software update, to avoid data loss they first need to back-up any data stored within the hard drive partition used by the "Other OS," as they will not be able to access that data following the update," Seybold added.
How do I make share internet connection with playstation 3 with Linux Mint? I have put ethernet cable between them.
View 1 Replies View RelatedOkay, when I load epsxe it loads just fine and I got it playing playstation games BUT the audio doesn't work. I have this issue with Basilisk II and it never got solved. When I load the epsxe executable I get
Quote:
I wonder if this is a regression, I have seen info that this bug had been in the SB600 and worked around with 2.6.26:
Here's my lspci:
uname:
This is happening on three out of three SATA disks in the system and, even though I can't explain how, seems to have caused data loss on the mdraid they support.
It would be great if someone has a good idea on this one.
adding smartctl -a, just in case
After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
How would i go about getting my PS2 controller working in 11.3? It's connected via a PSX to USB adapter.
View 1 Replies View RelatedI have the following problem: I can't authorize with my central WinNT 4.0 domain controller. I set up all parameters in YaST, but still can't see any shares or get inet access.I am using gnome and it shows several windows workgroups. While I am trying to open it, gnome shows a window to request my login credentials. I am setting up all thing right and then it shows it again. I tried smbclient utility to login, but still can't login.What can I do about it?Also I have some problems with my http proxy: suse doesn't sent it my login/password while I can easily work with proxy, that doesn't request it
View 1 Replies View RelatedI downloaded the appropriate iso for the ps3 from here:[url]
(specifically: ubuntu-10.04-desktop-powerpc+ps3.iso via torrent)
Installation runs smoothly up until 100% and then i am prompted to reboot.
When i click reboot, i get info on some daemons(?) shutting down(i think) and then the cd is automatically ejected and i am prompted to press enter.
So far, so good. After i hit enter though, i get a large amount of various read errors and finally a segmentation fault. The system just hangs there :/.
I forcibly reboot the PS3, and then i am greeted with the pack of errors that are shown in the screenshot.
I need to set up a domain controller that can communicate with windows machines as well as be accessable by the domain name and allow me to log in to the domain from my windows machines. i do have the novells guide to compTIA linux+ book but i cant figure out what i need to do to set up this server in the way i described above.
View 4 Replies View RelatedI have an issue with my Sound on OS 11.2.It is correctly recognized under hardware and the driver seems to start properly as well when I do rcalsasound start.But under Control Center / Sound Preference there is no audio hardware listed (and hene no sound playing)
View 3 Replies View RelatedI am testing Suse 11.3 and have run into a problem with Intel's integrated graphics and resolution. Here is a dump of the hardware information I pulled from yast.
[Code]....
I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.
Code:
hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42
[code].....
I am using a wireless Xbox 360 controller with openSUSE 11.1. I use it for some emulators and all buttons work fine. There is however an annoying problem, the Xbox controller left joystick controls the cursor and digital pad acts as mouse buttons. So while I play, the cursor moves all around the screen and bad things could happen. Why this behavior? In xorg.conf there seems to be only just 1 mouse. And if I go in Joystick via YaST, there is only a menu to select which joystick I have. But my wireless controller has been automatically detected, I didn't setup anything. Is there a config file that I can modify to stop controlling the mouse with my gamepad?
View 6 Replies View RelatedI'm not able to configure my microfone. Audio works very well. HW it's OK, mic works well on windows. Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
[code]...
I want to stop using Windows because it sucks so i have downloaded all kind of distibutions from Linux. They give all the same error because it seems Linux has problems with Fakeraid. Now i have running OpenSuse in VmWare 7.0.1 but i want it as the only OS.
The installation goes fine but in the end it gives a Grub error because it cannot create the bootloader. It seems to be a common problem and i have done all the steps that i could find on Google.
I have two raid controllers. One is integrated in the mainboard from Asrock ALiveNF7G-HD720p R5.0 and OpenSuse sees it as a Jmicron controller.I have bought also a EM2001 2 Poorts PCI Controller SATA card with two harddisks in Raid 0 because Linux failed to install on the JMicron. On the EM2001 2 Poorts PCI Controller SATA it also fails with the same error.
I want OpenSuse 11.2 working on Raid 0. I know it must be some simple commands in the terminal through a live cd to correct the bootloader and do it manualy by Linux users but i'm a Windows user.
Can somewhone please tell me the exact steps and commands to install Linux on Raid 0 Fakeraid?
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
i've made a video tutorial showing how to install playstation 3 media server on ubuntu and uploaded it to videos.
enjoy! [url]
Im trying to form a gaming comumunity on facebook around the issue of PlayStations new 3.21 firmware, if we can get enough members and we are able show a large enough fan base for the retaining of the OtherOS while also being able to access the PSN were hoping Sony will reinstate the feature. Its a long shot but if you at LinuxQuestions could join the group and also pass the link around hopefully we can at least do something.
Gamers Against the PlayStation? v3.21 "Other OS" Firmware Update [URL]