Hardware :: Evga GeForce 9500 GT Replacement Fan Not Spinning At Full Speed
Feb 8, 2010
one of my Evga GeForce 9500 GT's fan started acting up today. It is wobbling, vibrating loudly, and not spinning at full speed. And while I believe the card is still under warranty, I'd rather just buy a new fan and put it inmyself avoiding the hassle of sending it back and waiting for a replacement (and most likely refurbished) one. That being said, does anyone know where I could buy just the fan? Google has turned up nothing so far but the numbers on the fan are A4010-45LB-2UN-C1 and FA7C0412MA-SBNNA but I have no idea what these numbers are; the manufacturer is Cooler Master.
View 1 Replies
ADVERTISEMENT
Jan 1, 2011
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
View 2 Replies
View Related
Jun 4, 2011
i am having trouble installing xubuntu 10.04 with my evga geforce 6200 video card. My motherboard has the onboard intel 845g? card. The computer will not read the live cd with the video card installed. it hangs on the splash screen right after choosing " try without installing" i have tried nomodeset but that dose not help. I have no problems installing with the video card removed. My computer i a hp pavilion a647c.
View 2 Replies
View Related
Dec 12, 2010
I am planning on upgrading the video card in my computer, an NVidia GeForce 9500 GT video card, to something that can handle at least 1600x1200 24-bit resolution without noticeable choppiness other "slow-downs" in graphic display. The card in question does have one gigabyte of RAM, but the type of memory it utilizes is DDR2 instead of something, i.e. DDR3 and above, with greater speed. Admittedly, the system in question is used for gaming as well as work. I want to stick with the NVidia brand because it has worked well for me, but I am not sure what would be the correct line of cards to use.
View 4 Replies
View Related
Jun 19, 2010
I am having trouble with my graphics card fan speed when I boot into runlevel 3 on my Fedora 12 machine. Normally, when I boot into runlevel 5, my fan speed goes down to a tolerable level.
However, the fan speed does not go down when I boot into runlevel 3 - rather, it is very loud! I suspect that the nvidia driver is tied somehow to my X session. I have a GeForce GT 220 Nvidia graphics card coupled with the 190.36.24 nvidia driver.
Is there any way I can reduce the fan speed when I boot into runlevel 3?
By the way, I have tried nvclock v0.8 Beta 4, but upon trying to adjust the fan speed to an arbitrary value (within limits 1-100), I get the following:
Code:
I am currently running in the 2.6.32.12-115.fc12.x86_64 kernel.
View 3 Replies
View Related
May 6, 2011
I am using a toshiba sattelite L300 laptop, and i am facing severe overheating issues as a result of the cooling fan Barely even spinning / not spinning at all.
Temps have been as high as 110 degrees, It's extremely frustrating.
View 1 Replies
View Related
Jan 12, 2011
I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...
View 2 Replies
View Related
Dec 2, 2009
I recently installed F12 on my main notebook and ever since the fan has been running at full speed (or near full speed). According to the 'sensors' command I usually have temperatures between 50-70. I didn't have this problem before the installation.
View 2 Replies
View Related
Jun 8, 2010
DG31PR Intel Corporation with Lucid 32 bit. how to get the CPU fan to normal speed. I googled a bit around but so far no success.
View 3 Replies
View Related
Mar 11, 2010
No error message given and system still works. Same result on Ubuntu, Chrunchbang and Fedora 12. Maximum speed 533 but size is recognised. Tried on another machine all is well.Errant hardware is ASRock N68-S with AMD AthlonX2 5050e. Stated as compatible on the asrock ref.
View 4 Replies
View Related
Aug 29, 2015
I have a Compaq 8710w and after upgrading to the latest Debian/testing (Linux version 4.1.0-1-amd64)the fan runs at full speed all the time. There seems to be something strange with the temperatures reported by temp4, it is stuck at 100 degrees.:
Code: Select allroot@...:~# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:    +16.0°C (crit = +105.0°C)
temp2:    +38.0°C (crit = +105.0°C)
temp3:    +22.6°C (crit = +110.0°C)
temp4:    +100.0°C (crit = +110.0°C)
temp5:    +37.0°C (crit = +110.0°C)
[code]...
I found this related problem: URL... . Note that here the problem is that the fan does not spin and that temp4 reports 0 degrees.
View 5 Replies
View Related
Aug 19, 2011
I'm fairly new to fedora. I used Fedora 14 on a virtual machine just to mess around with it a little while back but thats about it. As far as linux goes, I just test a bunch but can never seem to pull myself away from windows. I am hoping this is the time but these issues are the weirdest I've seen on any linux distro ever. My GPU (Radeon 5750) is running at 69C idle and the fan is at full speed. I am not overclocking it at all and I'm using the default drivers that came with fedora. It works just fine in windows and a lot cooler. How can I fix this?
I'm running the Gnome 3 desktop version, which I am also getting some graphics artifacts. In the bottom bar I get a dashed white line that comes up every time I boot and goes away when I make the bar expand. Also in the applications window I get the same dashed line at the top of the window and sometimes the top of the scroll bar. So far I really like Gnome 3 (Idk why everyone is whining about it) and I'd like to stick with Fedora, and linux for that matter
View 9 Replies
View Related
Dec 31, 2010
I upgraded from FC12 to FC14 and now the system/case fan blows full speed constantly. I also moved from i386-PAE to am64.
The CPUs are cool, the machine is basically idle, and the fan noise is really annoying (and blowing cool air).
In FC12 the fan would auto-adjust with CPU load. This is not the case now.
I ran sensors-detect and it doesn't seem to find my fans:
[root@pangea modprobe.d]# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0C (crit = +75.0�C)
k8temp-pci-00c3
Adapter: PCI adapter
code....
I don't remember ever having to even run sensors-detect in FC12. I searched the board for a bit and didn't see any solutions. I'll attach the full output from sensors-detect.
View 2 Replies
View Related
Jan 3, 2011
I installed on this laptop two OS : Windows XP SP3 with drivers for M11 from Toshiba download site Fedora 14 64 bits I have no problem running Windows but sometimes when I run Fedora I hear fan starting to run at full speed then computer hangs. When this occurs, I must power off it using switch then reboot and I lost my work. I try to run Memtest86 during a full night and I did not get any error or hang.
Is there somebody who already installed Fedora 14 on Toshiba Tecra M11? kernel is 2.6.35.10-74.fc14.x86_64 and my graphic card worked fine with hardware acceleration out of the box.
[Code]...
View 4 Replies
View Related
Aug 28, 2010
Today I received as a gift a 5 years old Gateway 500X CPU which is apparently dead due to a faulty motherboard (I still have to troubleshoot it, of course).
Even in the cause I can fix it, odds are I'll prefer to make the aforementioned CPU a donor for my other machines, instead of resurrecting an old Pentium 4 (no HT) system.
Being this the case I checked the parts for possible transplants:
512MB DDR PC2700 memory module (useful right off the shelf for my main desktop system).
120GB Maxtor IDE hard drive (also useful, assuming it is in working order).
128MB AGP8X NVIDIA GeForce4 MX440 graphics card.
On this last part (the graphics card) I have my doubts as of where to use it. My main desktop system already has an NVIDIA card: FX5200, 128MB, which is newer. The thing is that I've been doing some homework comparing both the MX440 and the FX5200 and get mixed opinions: for one thing the FX5200 is the latest of the two with some advantages like support for a later DirectX (which for Linux is pointless) and other things, but the FX5200 is also reported to be technically inferior to the MX440.
In your opinion/experience which card is a better performer? Should I expect a performance gain if I were to replace the FX5200 with the MX440?
View 4 Replies
View Related
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
View Related
Nov 5, 2010
have a " Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)" NIC.I was unable to set it 1000bit and full duplexThe output lspci -v as below.Quote:
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 8432
[code]...
View 3 Replies
View Related
Feb 28, 2011
My wireless connection work just fine but it gives me wrong connection status, like 10% even when I'm seating near the wireless router or disconnect status while I steal manege to use the internet at full speed.
View 1 Replies
View Related
Jan 14, 2011
I recently built a new computer and got an evga 570GTX (Nvidia)I was using windows 7 pro that I got for free from school (MSDN or something) but it was crashing every 5 minutes. I could get on a play a game for 4 hours, but cuz cursing around or surfing the web was crashing all the time. Complete freeze. Couldn't start the task manager, number lock and caps lock jammed ect...
I was starting to think it was my MOBO failing because of the reviews until I installed ubuntu and everything was fine, no crashing no bull$#!7 no evil sauce.
Only problem was I installed 10.04 and fought it for a day with no luck installing the graphic card drivers but today I installed 10.10 and it picked up the nvidia drives right away.
Now the only problem I am having is audio.
In Windows I could play audio over the HDMI cable but in ubuntu I cannot.
I've tried using a headphone cable and that doesn't work either, and I know it's not the cable or the green sound port on my MOBO because other speakers work in the port, headphones work, all the cables work ive tested them on other computers and speakers and in cars, so the only thing left is the OS. I want to be able to play audio from the computer over the hdmi cable to the TV.
I've played around in the sound settings for hours... NOTHING.
I dont get how something as simple as audio over HDMI or a headphone jack/cable can be done by windows and not UBUNTU!
View 9 Replies
View Related
Jun 5, 2010
Would ubuntu 64bt recognise the 48gb on the of memory available on that motherboard,,, and would it recognise the the 2 CPU's that are installed on that motherboard.
View 1 Replies
View Related
Nov 18, 2010
I should preface this by saying I'm pretty much new to ubuntu. I was a nerd back when I used windows, so I'm fairly knowledgeable about it, but I lost interest right before switching to linux, so I haven't learned much past basic navigation.
I bought a WPN311 wireless card for my homebuilt machine a while back and still can't seem to get it to work. One person told me that after upgrading to Lucid it should work out of the box but that's not the case. It seems my computer doesn't even recognize that the card is plugged in. When I open the drop-down menu to choose which network connection to use, any sort of wireless option doesn't even show up.
My machine:
EVGA 112 CK-NF68-T1 motherboard
Intel Core 2 Duo E6750
Two sticks OCZ DDR2 PC2-6400
ATI Radeon X1650 Pro
And the Netgear WPN311 in question
lspci output:
Code:
00:00.0 Host bridge: nVidia Corporation C55 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
00:00.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
00:00.3 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
[code]...
View 3 Replies
View Related
Aug 17, 2011
I want to install ubuntu on my Blackberry 9500 Storm1 how do i do this? Also can i do dual boot?and before anyone ask i want to do this because i like ubuntu alot and prefer it to the BB software
View 2 Replies
View Related
Jun 23, 2011
How to install Nvidia 9500 GT with nvidia driver.
View 5 Replies
View Related
Mar 23, 2010
I (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..
View 1 Replies
View Related
Dec 22, 2010
so I've got a openSuse 11.3 machine with KDE. As graphic card I've got a 9500GT and as display a syncmaster 570b. Now both work fine with other products (9500GT works fine on my other display and my Windows laptop works fine with the syncmaster 570). I beleive it's because of the frequency. here's a list of frequencies supported by the 570: Technische Daten zu Samsung Syncmaster 570B - TFT Monitor bei dooyoo.de
I also installed nvidia drivers via yast2. But how do I change the frequency? I've been trying to solve the problem for hours. Oh yeah when I connect my 570b to my 9500gt, I sometimes get a picture and sometimes don't. However when I get a picture colors are very strange and it flickers hardly.
View 9 Replies
View Related
Feb 25, 2010
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
View 2 Replies
View Related
Jul 3, 2011
I think I have found the problem to my Ubuntu laptop locking up, and it is most likely overheating. Is there any way to keep the CPU fan spinning at 100% constantly? I tried setting it up in the BIOS but it is an old laptop and I can't control it from there.
View 4 Replies
View Related
Aug 11, 2011
I have a PC which I built ~3 years ago which had been running smoothly and silently until recently. Now, the CPU fan likes to spin up to 1200-1500 RPM even when it's idle, which is rather annoying. I have not made any recent changes (software-wise or hardware-wise) to it.
The specs:
Motherboard: Gigabyte MA78GM-S2HP
CPU: AMD Athlon(tm) Dual Core Processor 4850e
Case: Antec Minuet 350 MicroATX
OS: Ubuntu 10.04, Linux 2.6.38-10-generic
I installed the lm-sensors and hddtemp packages (via apt-get) and configured them. Here's a typical output at steady-state, where the computer's been idle for a while and the fans have been spinning for the same while:
$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +29.0°C
Core0 Temp: +32.0°C
Core1 Temp: +27.0°C
Core1 Temp: +22.0°C
it8718-isa-0228
Adapter: ISA adapter .....
$ sudo hddtemp /dev/sda
/dev/sda: WDC WD5000AACS-00ZUB0: 35°C
These all seem fairly normal to me, so I'm perplexed as to why the fan continues to run at such a high RPM. What does the ALARM that's reported for in6 mean? Is it important? I've been playing around with the fancontrol daemon, trying to see if I could get better results than with the default fan management. Using the pwmconfig utility, I generated the following /etc/fancontrol file:
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon0=devices/pci0000:00/0000:00:18.3 hwmon1=devices/platform/it87.552
DEVNAME=hwmon0=k8temp hwmon1=it8718
FCTEMPS= hwmon1/device/pwm1=hwmon0/device/temp1_input
FCFANS= hwmon1/device/pwm1=hwmon1/device/fan1_input
MINTEMP= hwmon1/device/pwm1=35
MAXTEMP= hwmon1/device/pwm1=60
MINSTART= hwmon1/device/pwm1=180
MINSTOP= hwmon1/device/pwm1=100
This only sort of works—as soon as I enable the fancontrol daemon, the fan shuts off at first (good), but the temperatures of the 7 different sensors slowly rise, even when everything is idle. Eventually, when the Core0 Temp sensors goes past 35°, the fan comes back on, and then it alternates from being on and off at around 500-700 RPM, as the temperature goes back and forth across the boundary. It's certainly much more pleasant than 1200-1500 RPM, but it's still far from desirable.
Here's an example of the sensors output in that situation:
$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +36.0°C
Core0 Temp: +38.0°C
Core1 Temp: +34.0°C
Core1 Temp: +30.0°C
it8718-isa-0228
Adapter: ISA adapter .....
cpu0_vid: +1.100 V
I opened up the case, and the CPU heat sink felt warm but not excessively hot. I tried taking off the heat sink, cleaning off the thermal paste, putting on new thermal paste, and putting the heat sink back on, but that didn't seem to have much of an effect, if any. The two other heat sinks—one on the built-in AMD 780G graphics chipset and the other on the AMD SB700 southbridge—felt noticeably hotter than the CPU heat sink. So, my question is this: What should I do to get this computer back to the state where the fan is off when it's idle? Can I solve this with a smarter fancontrol configuration?
I cleaned out the heat sink and fan as best I could with compressed air (there wasn't a whole lot of dust, but I got rid of what I could), but still no dice. Rebooting into the BIOS configuration gives me the same results—the fan still runs at 1100-1200 RPM, and the system and CPU temperatures are reported as 40-44°C. Should I add another fan? The integrated GPU and the SB heatsinks felt significantly warmer to the tough than the CPU heatsink. The BIOS reports a system fan speed and NB fan speed of 0 rpm (since I don't have more than one fan).
View 2 Replies
View Related
May 1, 2010
I updated from 9.10 karmic to 10.04 LTS. Everything worked fine until, I restarted. Upon logout there are no splash screen like I had before in the 9.10, and my fan on my gfx are going crazy, spining at 100%. Well then I got to the grub loader, and discovered my boot splash was gone to. The only thing which is displayed on the screen are: mount dev /dev failed device71 Starting up. Then 10 seconds later alot of texts shows up and I get the login screen. I've looked around on the forum and other sites for a solution, but with no luck.
View 9 Replies
View Related
Jun 8, 2011
it gets the hdd very warm and keeps the fan on constantly as well generally heating the whole system . was so bad i ended up having to go back to windows anything i can do to get the hdd to go in standy by when in active like windows ???? cause i hate windows and love ubuntu but i dont wanna burn up my machine to keep ubuntu
View 7 Replies
View Related
