Fedora Hardware :: Full Speed USB MSC Device Detected As Input Device?
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
ADVERTISEMENT
Sep 6, 2010
i am having dell inspiron 1540 laptop installed with ubuntu 10.04 (updated). i wanted to install LAMP(Linux,Apache,MySQL,PHP) for software development purpose.
but after restarting the system, following things occured:-Message box appears saying "Ubuntu is running in low-graphics mode" Your screen, graphics card and input device setting could not be detected... OK
Then i get prompt saying what would you like to do ?Run ubuntu in low-graphics mode for just one session.
i get a message starting display in one minute.....nothing happens ... i switch to text mode by pressing
escape. There is a brown color star before: Speech dispacher configured for user sessions.on battery state there is a infinte loop i.e. no response and system just hangs there...startx at text mode makes the screen blank...
Please tell which part of '/var/log/Xorg.0.log' sholud be scanned to find required information.
i am a new to ubuntu How to solve this problem i donot have internet connection and its important that i get it repaired as soon as possible....essential to get it running else i will be forced to goto Windows...
View 3 Replies
View Related
Feb 16, 2010
I have a Kore Controller from Native Instruments [URL] using it as a sound card on Fedora 12. Its input knobs are supported by Linux, too, but they are pretty useless for me.It came out that these input knobs send mouse movements from time to time, letting my mouse pointer jumping to the upper left corner of the screen.
So I want to disable the knobs, i.e. I want X to not interpret these "knob actions" as mouse movements. What is the best way to achive this? Can I disable it somewhere in HAL configuration or do I have to modify xorg.conf? And how do I do this?Simply plugging out the Kore Controller is not an option for me because I use it as sound card.
View 8 Replies
View Related
Apr 11, 2010
I need to set the default input device to be the microphone on my webcam for when I skype, but it seems to keep resetting itself, so I keep going in and changing it.
I am right clicking the volume icon and going into Sound Prefs -> Input, and selecting the camera.
How do I stop it from forgetting this and resetting it?
View 4 Replies
View Related
Dec 27, 2010
I am trying to record a video clip, using my webcam, but sound synchronisation is always poor. I have used Cheese, UCView and VLC. One possible cause is explained in the reply to this question, but I am not an expert. In desperation, I now want to try ffmpeg. The ffmpeg documentation gives the following example
Code:
ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg
My system has no /dev/dsp, but does have /dev/snd with these files
Code:
$ ls /dev/snd
[Code]...
View 11 Replies
View Related
Jan 21, 2010
I have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.
dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice
[code]...
View 4 Replies
View Related
Jul 5, 2011
I have recently installed fedora 15, I'm trying to connect my mobile phone to my laptop through bluetooth, when I did setup new device it is just showing device address and (instead of name), and the forward button is not enabled..FYI - I have started and enabled the bluetooth services using systemctl
View 9 Replies
View Related
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
View Related
Jul 18, 2010
I just bought an M-Audio Keystation 49e off of craigslist and I'm at a bit of a loss on where to start to use it as an input device for muse or rosegarden.
Distro: Debian Lenny
Kernel: 2.6.26-2-686
Laptop: Compaq V5305WM
Everything seems setup, but I'm at a loss on how to use it in the applications. It doesn't have any sound synthesis abilities on the keyboard, it's just an input device. Without the keyboard I usually go this route:
jackd -R -d alsa &
timidity -Oj -iA &
rosegarden
And midi events output sounds and all that jazz. I'm wanting to input notes / record from the keyboard. But still output all sounds in the aforementioned manner. If I could get those to happen while I record that would help a bunch. Maybe it's just too late in the day for me to wrap my brain around it at the moment.
[Code]...
View 7 Replies
View Related
Jun 2, 2011
I bought a x-kim gptl-00c gamepad and when I plug it in it is not recognized.
The dmesg read out is
[ 2173.516017] usb 5-2: new low speed USB device using uhci_hcd and address 63
[ 2173.928012] usb 5-2: device not accepting address 63, error -71
it is not detected from lsusb
[Code]...
View 1 Replies
View Related
Mar 19, 2009
Long story short - on my laptop, touch pad is recognised as PS/2 mouse. Everything works (moving, clicking, dragging, vertical scroll). But I often accidental click the pad while typing.Synaptic driver recognises it as ALPS glide point it seems (synclient -m 1 gives me back only x,y difference for the gestures, but X,Y coordinates are always 0,0) - so then I get everything right including disabling mouse on keyboard input - but scrolling doesn't work So I came up with 2 possible ideas - which I don't know how to do/test:1. Perhaps there is a way to disable mouse input while typing without synaptics drivers?2. Create a dummy input device (mouse), and tie synaptics driver to it. Add another input device in xorg.conf to point to the real touch pad as PS/2. And make the synaptics disable "real mouse" by enabling GuestMouseOff option.
View 1 Replies
View Related
May 2, 2011
I delete input device. How to fox it? All the sound is working only microphone problem.
View 2 Replies
View Related
Jun 7, 2011
My touchscreen "LG Display LGD-MultiTouch" will be recognized sometimes as /dev/input/event0 and sometimes as /dev/input/event3. How to hardcode /dev/input/event0 using udev and xorg.conf?
Code:
# cat /proc/bus/input/devices
I: Bus=0003 Vendor=1fd2 Product=0064 Version=0100
N: Name="LG Display LGD-MultiTouch"
P: Phys=usb-0000:00:1d.7-4.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=1b
B: KEY=403 0 30000 0 0 0 0 0 0 0 0
B: ABS=700 3f
B: MSC=10
# udevadm info --query=all --path=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
E: PRODUCT=3/1fd2/64/100
E: NAME="LG Display LGD-MultiTouch"
E: PHYS="usb-0000:00:1d.7-4.1/input0"
E: UNIQ=""
E: EV==1b
E: KEY==403 0 30000 0 0 0 0 0 0 0 0
E: ABS==700 3f
E: MSC==10
E: MODALIAS=input:b0003v1FD2p0064e0100-e0,1,3,4,k110,111,140,141,14A,ra0,1,2,3,4,5,28,29,2A,m4,lsfw
E: SUBSYSTEM=input
View 3 Replies
View Related
Dec 27, 2010
I am trying to record a video clip, using my webcam, but sound synchronisation is always poor. I have used Cheese, UCView and VLC. One possible cause is explained in the reply to this question, but I am not an expert. In desperation, I now want to try ffmpeg. The ffmpeg documentation gives the following example
Code:
ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg
I want to use alsa, not oss, but need to know the alsa input device name (/dev/dsp is created by loading the oss modules). By running alsamixer, I have nutted out that /dev/snd/controlC0 refers to the HDA Intel sound card, ~controlC1 is my USB webcam and ~controlC29 is the microphone built in to my notebook, but these are control devices, not inputs.
[Code]...
However, that does not explain which device is the mic built in to the laptop: by my calculation, it should be pcmC0D1c, but there is no such device. In /proc/asound/card0/pcm0c/ I have directories for sub0 and sub1, which I am guessing relate to the mic jack and inbuilt mic respectively. Do two physical mics share one logical device somehow? I am starting to really confuse myself, if you haven't guessed that already.
I think my question boils down to "How do I record a video clip on Fedora 14 using ffmpeg?", but I am specifically interested in knowing how to specify each of the alsa sound input devices for my system.
View 8 Replies
View Related
Jul 8, 2010
I have installed ubuntu 9.04 version. But now its too slow to copy files to any devices or even to other drives.
View 3 Replies
View Related
Jan 9, 2010
I have freshly installed ubuntu 9.10 and moreover i am completely a newbie to Linux. The problem now i am facing is, i am not able to configure my wireless router. I tried finding drivers for it in System->administration->hardware drivers. But it showed me none. Then i checked out one of the threads in this forum and came across the 'lspci -nn' cmd. This gave me the info abt my wireless network controller and it was : 'Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)'.
View 1 Replies
View Related
May 8, 2010
some days ago I upgraded to Ubuntu 10.04 and now I have a problem with my webcam. I like to use chatroulette and mebeam, therefore I have to use programs like webcamstudio/flashcam... (Flash does not accept the normal cam device v4l2 and webcamstudio puts it to v4l loopback). The problem is that Ubuntu is detecting only v4l2 and not v4l, so that I don't have an output device in webcamstudio.
When I type:
ls -l /dev/video*
the answer is only:
crw-rw----+ 1 root video 81, 0 2010-05-08 17:59 /dev/video0
and nothing more
how I can create a second video device for flash.
View 7 Replies
View Related
Aug 9, 2011
I have tried connecting an LG GD330 mobile in both "Mass Storage" & "Data Service" but in either cases it does not appear in bansheee nor even in rhythmbox.
View 6 Replies
View Related
Aug 18, 2011
I'm trying to install 11.04 onto a custom build pc.I have burned an install CD of the desktop edition and have inserted it into the drive, started up, and tried to run the live version. IT pops up, everything works, Hooray! I go to install it to disk and I follow all the prompts and it needs me to reboot to start. YAY! I click to reboot, remove the CD as requested, and then I get the "No Boot Device Detected!" error message.
I then tried installing straight from the CD and not booting into the live version. I follow all the steps and get a congratulations on installing it and all I need to do it reboot. I remove the CD, reboot, and BANG! the same message. I'm not sure what's up or even where I can get information from because there is no BIOS splash screen or anything to naviagate through.
System Specs:
Intel Atom Mobo/Proc (1.66Hz)
8GB Corsair RAM
1 slim optical drive (SATA)
1 2TB Seagate HD (SATA)
1 Case/PSU combination
EDIT1: Currently I am checking the live CD for defects (though it has an internet connection so I'm unsure whether the CD matters).
View 2 Replies
View Related
Jul 31, 2011
my thinkpad Edge 11 has some problems with the touchpad and the trackpoint, so i want to permanently disable the touchpad, but not the TrackPoint. Both are PS2 devices.
/dev/input/mouse0 --> TouchPad
/dev/input/mouse1 --> TrackPoint
How can i disable the device? In X it does not work with gpointing-device-settings
View 2 Replies
View Related
May 14, 2010
When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again.
Xorg.0.log:
...
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(--) Synaptics Touchpad: touchpad found
# { rmmod psmouse && echo mem > /sys/power/state && modprobe psmouse; }
(WW) : No Device specified, looking for one...
(II) : Setting Device option to "/dev/input/mice"
...
How to tell X.org to try it's InputDevice again (without restarting X server)? rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.
View 1 Replies
View Related
Jun 10, 2010
I have installed Lynx and want to use two X servers at the same time. Each server has its own ServerLayout section in xorg.cong. The first ServerLayout Section has AutoAddDevices enabled, so that new input devices are added automatically. The second ServerLayout has AutoAddDevices disabled, and one InputDecice pointing to /dev/input/mouse3. That way, this mouse is the only input decive affecting the second X instance.
Unfortunately, this mouse is also controlling the first server (due to AutoAddDecives). Can anyone tell me how to disable this? I want every input device to be added to the first server, except this mouse. In earlier versions of ubuntu, I used a hal rule to make hal ignore this mouse. So it was not added to the first server. Now that hal is not used by lynx anymore, I don't know how to do this. I have already read some things about udev and the xorg.conf.d folder.
View 1 Replies
View Related
Jul 6, 2010
I use a USB webcam with a built in microphone. It works fine, but every time I plug it in I have to go to sound properties and select it as the input device. There are no other input devices present on my system. Since it's the only one there, is there any way to get it to automatically select when I plug it in? If not, I think that would be good functionality to add. Does anyone know who or what team to contact about that?
View 3 Replies
View Related
Feb 8, 2011
No audio input device can be found in sound preference>input but in sound preference>hardware>it shows the input webcam recorder device.
When I use
Code:
alsamixer
onto terminal it shows this
and also i checked cable device and everything. And it was working till I last hour. I rebooted computer then there's some problem, I haven't change anything before or after rebooting.
View 3 Replies
View Related
Jun 11, 2011
I'm using FFADO on JACK in order to use my firewire device (M-Audio Profire 610) and I seem to have the opposite issue as others who have similar problems. Everything starts up fine, and I can record audio into Ardour using my inputs, but I can't get any output from any of my 8 line outs.
I've checked the connections using QjackCtl, and I tried to route audio from another program (Audacious) but I can't seem to pull audio out of the device (or the computer won't send my device audio?).
View 1 Replies
View Related
Jul 11, 2011
I can't use my line-in/microphone jack. In system-management-sound input tab there is no input device listed, and the input controls are grayed-out. sudo lshw -C sound produced:
description: Audio device
product: N10/ICH 7 Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
[Code]....
View 1 Replies
View Related
Aug 14, 2009
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies
View Related
Jun 28, 2010
Running Fedora 13, I cannot add my HP J4680 through the HP Device Manager. I get an error message saying that the print queue cannot be started and it asks me to restart CUPS. I tried restarting CUPS and adding the device. It did not work. The printer is on my home network wirelessly. I can add it through the CUPS web interface and print, but then I cannot access the scanner. I tried adding the device after it was already added through CUPS, but that did not work. I would like to use the scanner; I don't really care about the fax.
View 8 Replies
View Related
Nov 29, 2010
I have vonage phone service and two computers - currently using the vonage device which is essentially acts as a router with 2 phone ports. The trouble is, the vonage device splits the download speed among the two computers and the phone even when the second computer and the phone are plugged in but not actually being used. Is there such a thing as a router with phone ports that does Not do this?
View 4 Replies
View Related
Jul 12, 2011
is this normal to see in dmesg multiple times after booting (screenshot)
Code:
lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 2 Replies
View Related
