Debian Hardware :: Install Nvidia 9500 GT With Its Driver?

Jun 23, 2011

How to install Nvidia 9500 GT with nvidia driver.

View 5 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Wrong Resolution In Nvidia 9500 GeForce 9500 GT

Jan 1, 2011

After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?

[Code]...

View 2 Replies View Related

Ubuntu Multimedia :: Failed ATI Radeon 9500 Driver Install?

Mar 23, 2010

I (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..

View 1 Replies View Related

Debian :: Can't Install Driver Dowload Driver From Nvidia?

Mar 5, 2011

install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.

View 3 Replies View Related

Hardware :: Upgrading From NVidia GeForce 9500 GT Video Card

Dec 12, 2010

I am planning on upgrading the video card in my computer, an NVidia GeForce 9500 GT video card, to something that can handle at least 1600x1200 24-bit resolution without noticeable choppiness other "slow-downs" in graphic display. The card in question does have one gigabyte of RAM, but the type of memory it utilizes is DDR2 instead of something, i.e. DDR3 and above, with greater speed. Admittedly, the system in question is used for gaming as well as work. I want to stick with the NVidia brand because it has worked well for me, but I am not sure what would be the correct line of cards to use.

View 4 Replies View Related

Debian :: Install Nvidia Graphics Driver?

Apr 8, 2010

I have already installed Debian testing and now looking to install Nvidia drivers version 190.

I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.

View 14 Replies View Related

OpenSUSE Hardware :: Nvidia 9500 GT & Syncmaster 570b - Change The Frequency

Dec 22, 2010

so I've got a openSuse 11.3 machine with KDE. As graphic card I've got a 9500GT and as display a syncmaster 570b. Now both work fine with other products (9500GT works fine on my other display and my Windows laptop works fine with the syncmaster 570). I beleive it's because of the frequency. here's a list of frequencies supported by the 570: Technische Daten zu Samsung Syncmaster 570B - TFT Monitor bei dooyoo.de

I also installed nvidia drivers via yast2. But how do I change the frequency? I've been trying to solve the problem for hours. Oh yeah when I connect my 570b to my 9500gt, I sometimes get a picture and sometimes don't. However when I get a picture colors are very strange and it flickers hardly.

View 9 Replies View Related

Hardware :: Dual Monitors Nvidia 9500 GT - Turn On The 2nd Monitor After Startup ?

Feb 25, 2010

I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.

Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG

Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).

from the lspci | grep VGA:

I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.

Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.

Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.

View 2 Replies View Related

Debian Installation :: How To Install Driver For Non-nVidia Chipset

Sep 19, 2015

I've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.

View 2 Replies View Related

Debian :: Open GL/GLX Not Functioning After 260.19.21 Nvidia Driver Install

Dec 16, 2010

I installed latest nvidia driver with SMXI. I have noticed that anything that uses open GL or GLX does not function. Screensavers, games etc. Output from glxinfo as follows

jon@DebSid:~$ glxinfo | grep "direct rendering"
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 138 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x3800003
Serial number of failed request: 30
Current serial number in output stream: 30
jon@DebSid:~$

System as follows,

Intel P4 2.66, generic descktop PC, Nvidia GeForce 7100 GS, Debian Squeeze/Sid

View 8 Replies View Related

Debian Multimedia :: Desktop Error After Nvidia Driver Install

Nov 8, 2015

Problem summary:

Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."

How to get back to original nouveau driver after failed nvidia driver install?

What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.

I already tried to remove nvidia driver by
# aptitude purge nvidia-kernel-dkms nvidia-glx
It was successful.

Then I reinstalled Xorg Nouveau driver and all its denpendencies by
# aptitude install xserver-xorg-video-nouveau
It was also successful.

But problem still occurs..

View 14 Replies View Related

Debian Hardware :: How To Install Nvidia Driver For Video Card

Feb 18, 2016

I have a video card. But I cannnot install nvidia driver because of some errors.

My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.

[CODE]

View 7 Replies View Related

Debian Hardware :: Install NVidia GeForce Driver For GT220?

Oct 25, 2010

install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.

View 10 Replies View Related

Debian :: Install The Latest NVIDIA Driver For 7800GS Card?

May 4, 2011

I've been trying to install the latest NVIDIA driver for my 7800GS card. dl the driver from NVIDIA. ctrl+alt+F1. stop gdm3, after I hit agree I get an error. The CC version check failed: The compiler used to compile the kernel (gcc4.3) dows not match the current compiler (gcc4.4). The Linux 2.6 kernel module loader rejects kernel module built with a..

View 3 Replies View Related

Debian :: Unable To Install NVIDIA Driver 195.36.24 After Kernel Upgrade?

May 4, 2010

After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.

Here is /var/log/nvidia-installer.log:

nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue May 4 11:49:38 2010
installer version: 1.0.7

[code].....

View 12 Replies View Related

Debian Configuration :: New Kernel And Headers Not Allowing NVidia Driver To Install

May 19, 2010

I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?

View 14 Replies View Related

Debian Configuration :: Install A Proprietary Driver For NVidia To Ensure That 3D Was Supported

Dec 17, 2010

I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).

Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?

View 14 Replies View Related

Debian Hardware :: How To Install Nvidia 7300 Gt Video Card Driver

Sep 7, 2014

I use a debian testing, I can't drive graphics card,open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?

View 5 Replies View Related

Debian :: NVidia Driver Install - GCC Kernel Not Matching Current Compiler

Aug 4, 2010

I am fairly new to Linux. My machine is running Debian 5.0.5 with gcc version 4.3. When I try to install the Nvidia QuadroFX 3450 driver I got from the Nvidia web site I get an error saying:
"The compiler used to compile the kernel (gcc 4.1) does not exactly match the current compiler (gcc 4.3)....."
Does this mean my gcc version is too new for the driver? if so, how do I roll back to a older version?

View 8 Replies View Related

Debian Installation :: Black / Blank Screen - Nvidia Driver Wouldn't Install

Apr 29, 2011

After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.

View 1 Replies View Related

Ubuntu :: Uninstall The Nouveau Driver And Install NVIDIA-x86-71.86.14-pkg1.run For Old Nvidia TNT2 Card?

Nov 30, 2010

Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:

Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.

View 3 Replies View Related

Debian Multimedia :: Updating Nvidia Driver To The Current 275.09.07 Driver Version Break Setup?

Jul 7, 2011

Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?

View 3 Replies View Related

Ubuntu :: Nvidia Driver Install Killed Display / Remove This Driver When I See Nothing?

Aug 8, 2010

Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?

View 2 Replies View Related

Ubuntu Installation :: How To Install On BlackBerry 9500

Aug 17, 2011

I want to install ubuntu on my Blackberry 9500 Storm1 how do i do this? Also can i do dual boot?and before anyone ask i want to do this because i like ubuntu alot and prefer it to the BB software

View 2 Replies View Related

Debian :: Installing Latest Nvidia Driver On Debian Squeeze ?

Nov 9, 2010

I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]

Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run

Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.

Did as folows:

Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.

Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.

View 14 Replies View Related

Debian :: How To Switch To Nvidia Driver

Mar 19, 2011

Using Debian Squeeze

I installed the Nvidia installer: NVIDIA-Linux-x8~.86.14-pkg1.run I configured the xorg.conf file and changed the driver from nv to nvidia. I also removed "load dri"

When I use startx I get this error and it won't give me a desktop:

(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available

This is all I remember doing with Lenny. Apparently there is something else I need to do with Squeeze?

View 4 Replies View Related

OpenSUSE Install :: Nvidia Geforce 8200 Driver Install Error - Version.h Not Found

Jan 11, 2011

After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.

Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h

PATH:

Using: nvidia-installer ncurses user interface

ERROR:

View 9 Replies View Related

Debian :: Jessie 8 - Installing NVIDIA Driver

May 15, 2015

I have installed before with ease following the Debian how to. On jessie 8 I have an issue with black screen, probably miss configuration but can't figure what?

View 8 Replies View Related

Debian :: NVidia Driver Installation With Some Quirks

May 15, 2010

I am trying to install the non-free NVIDIA drivers. I have read the guide here [URL] but what they didn't mention is what to do when you have a graphics card that isn't supported in Debian Lenny's repo driver version. I have the GeForce GTS 250, which isn't listed under the 173.14.09 (the stable repo version) supported VGA cards list. The version I need can be found in Sid and Squeeze (195.36.24 currently). If I add the Sid repository, it seems to work but it returns a whole lot of other unrelated package updates and its really annoying since I don't want to change to Sid yet. So how do I keep the rest of my packages under Debian lenny with only the minimal amount of packages to be under Sid.

I tried APT pinning once but the standard '*' won't work unless if it's alone in the 'Package' line. To clarify, a line like:
Package: nvidia-*
would get ignored.
I would also need a list of required packages and dependencies that must be installed from Debian sid to get this to work. The documentation for APT didn't help much. I can usually get around this problem by using the NVIDIA way but then I can't boot into Gnome GUI at all under other kernel versions except the one I compiled it for, unless I use the terminal to restore the Xorg stock drivers.

View 2 Replies View Related

Debian :: Run Nvidia-xconfig - Say Driver Not Found

Jun 4, 2010

If i run nvidia-xconfig, it will say driver not found, and the next time i boot, it will end up in a terminal. why is it so? (by the way i recovered from that using backup of xorg.conf). And i dont think now the nvidia-driver is present.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved