Ubuntu Multimedia :: Failed ATI Radeon 9500 Driver Install?
Mar 23, 2010
I (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..
View 1 Replies
ADVERTISEMENT
Jan 1, 2011
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
View 2 Replies
View Related
Jun 23, 2011
How to install Nvidia 9500 GT with nvidia driver.
View 5 Replies
View Related
May 2, 2011
I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
View 5 Replies
View Related
May 28, 2011
Upgraded to 11.04 - radeon driver gives error above in log below - screen works (software rasterizer) for a while and then eventually freezes.
fbdev driver works.
Installed very latest software updates available on net.
[ 20.483]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 20.483] X Protocol Version 11, Revision 0
[Code].....
View 4 Replies
View Related
Oct 10, 2010
I am attempting to install the Linuxant ALSA driver to make my sound work properly (speakers muting when headphones plugged in). This worked on Lucid, but on Maverick the installation fails at the "building modules" stage. It directs me to a logfile, which I have reproduced here:
Code:
rm -f .depend *.o snd.map*
rm -f modules/*.o modules/*.ko
rm -f *~ out.txt *.orig *.rej .#* .gdb_history
rm -f doc/*~
rm -f config.cache config.log config.status Makefile.conf
rm -f utils/alsa-driver.spec .....
make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic'
make: *** [compile] Error 2
The package partially installed I have no sound at all. I have kernel headers and every related -dev package I can think of installed. I'm running 64-bit; could that be an issue?
View 3 Replies
View Related
Oct 13, 2010
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies
View Related
May 13, 2010
I installed Lucid when I had my Nvidia board in the computer. Yesterday I pulled out the nvidia board and installed my new Radeon 5750. Hearing that the Open Source driver is the way to go, I first decided to try that. I edited xorg.conf replacing "nvidia" with "radeon", since this is the module name (right?) but it still doesn't seem to load. Does anyone have an example of what a properly configured xorg.conf is supposed to look like using the ATI Open Source driver? I get X up and running in "low graphics mode", but can never get beyond that.
Trying to turn on window effects causes a "searching for drivers" dialogue to appear and then disappear without success. A quick "glxinfo |grep -i render" indicates that it is indeed in the software mode. I even tried to manually modprobe the radeon module and restart GDM, but still nothing. At first I thought this was a limitation of the Open Source drivers on 5xxx series boards, but this page suggests that it should work in "gold" status. I have since installed FGLX and it is just terribly buggy, so I am hoping to use the Open Source driver.
View 5 Replies
View Related
Feb 19, 2011
is it possible for me to get this driver for Ubuntu v 10.10? This is the only thing stopping me coming over fully from Win7 right now...
View 1 Replies
View Related
Jan 6, 2010
I have a problem with my graphic card. My desktop effects and compiz work fine, but I cant find xorg.conf file (it seems I dont have a driver installed??). I want to play games, but I cant (warsow, and other via wine).. my computer cant start a game.
View 9 Replies
View Related
Oct 30, 2010
I know it's an old video card, but it worked just fine on Lucid after going through the following process:
HTML Code:
http://ubuntuforums.org/showthread.php?t=1578070
Unfortunately, after installing 10.10, I hadn't been able to enable desktop effects. I've been backwards and forwards through
HTML Code:
https://help.ubuntu.com/community/RadeonDriver
[Code].....
View 1 Replies
View Related
Feb 23, 2010
I'm having some graphics driver trouble on my Lenovo Thinkpad T500. I tried getting the ATI Proprietary driver to work (fglrx) but everytime I boot my X just crashes. Now I'm trying to use the open source driver, but i dont think its working becaues a) It doesn't detect that an external monitor is plugged in (for dual-view) and b) when i run glxinfo i get a "Error of failed request: BadRequest" message.
View 3 Replies
View Related
Mar 2, 2011
I just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.
View 2 Replies
View Related
May 4, 2015
I have an older computer and I did a fresh install of Jessie
Procesor AMD, Graphic card ATI Radeon 9200 PRO / RV280
After instalation my computer boot into black screen. I have no problems with wheezy.
I installed manually firmware-linux-nonfree (in case) module R200_cp is loading correctly.
When I configure Xorg, my log file says something like that:
-----------------------------------------------------------------------------------
(EE) Segmentation fault at address 0x0
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
--------------------------------------------------------------------------
View 14 Replies
View Related
Aug 23, 2011
I have ATI Radeon HD 5650 (code name Redwood) on Ubuntu 11.04. And I have been experimenting with open-source and proprietary driver.
The problem with proprietary driver is bad 2D rendering when watching movies in VLC (and any other), because if vsync is off, video is tearing and when its on, the video seems to stutter (the background moves in steps, not smooth). I have tried open-source radeon driver and its far better, but that driver doesn't have 3D acceleration for playing games. I was trying to play Hive Rise, and with proprietary driver works great, but with open-source the game starts, but i don't see the interface (start game, options, etc.).
It seems that Mesa 7.10 (in Natty) doesn't have 3D support for this card, but Mesa 7.11 (in Oneiric) will have that. Is that correct? I just want to have good 2D performance with ability to play games.
View 3 Replies
View Related
Feb 20, 2010
I just downloaded ATI Radeon x700 driver from Quote:[URL]..the file name is
Quote:
ati-driver-installer-9-3-x86.x86_64.run I gave permission as Executing file as program. I run as sudo from terminal but I get this error Quote: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.31-20-generic; make sure that the version is being correctly set by --iscurrentdistro
View 1 Replies
View Related
Sep 14, 2010
I've always had and used Ubuntu. When I installed and did not like the stability of a certain version, I just reformatted the partition and used LiveCD. OK, on a virgin SATA, 300-gig partition, I installed 10.04 and that took the ATI Radeon 3rd-party graphics driver. No problem. Then, the family wanted 2 languages on the machine. The German keyboard screwed me in terminal and I wiped out Home and all their data. I used Scalpel to image-carve 300-gig onto a 400-gig partition and tried to re-install Ubuntu 10.10.
The ATI's fglrx will not install, that's the error. That same file prevents upgrades of Ubuntu to current status.
is this thread current for my problem with 10.10?
http://ubuntuforums.org/showthread.php?t=651566
Or, do I have that 400-gig with the backup cross-pollinating?
View 2 Replies
View Related
May 7, 2010
I got given an old (non brand name) laptop and have installed XP and kubuntu 10.04 on it. The graphics card is Radeon Mobility X1600. Kubuntu gets a very strange problem which does not happen in XP:
Although the installation graphics are OK (sort of, there are some strange font irregularities), when it tries to reboot and fire up the graphics all hell breaks loose, the display is broken in two parts and shifted up with the overflowing region coming up from below. I 'm guessing something in the X server is trying to start and failing because when I try to drop to a text terminal (Ctrl-Alt-F<something or other>) I get pages filling up with error messages.
Unfortunately I can't remember what the messages say and I don't want to try to recreate it in a hurry because after this happens, subsequent reboots start the computer in this split screen mode (weirdly omitting the BIOS POST message) and I 'm not sure how to get it fixed, so far removing the battery, reseting the BIOS to default and letting it cool down seem to work, eventually.
Anyway, I figured since XP seems to be fine, it must be a software problem, although I 'm mystified how it persists and jumps between reboots (the split screen persists even all the way to the BIOS menu). I tried getting the driver from the ATI site code...
Removing temporary directory: fglrx-install.i3fXeb
So, if I can't run the ATI driver, my other option is to run whatever it is that the "Hardware Drivers" KDE menu item runs to get it to sniff out the driver I need. But I can't start an X server so I need to either run whatever it is that runs behind it or get the package I need through apt-get?
View 1 Replies
View Related
Dec 25, 2010
I am new to Ubuntu for the most part, but have done a lot of research on this OS. I just freshly installed version 10.10 32 bit, and the first thing I did was follow this tutorial on installing the drivers for my HIS Radeon HD 6850. I really want to get this drivers working so I can use the 3D effects on this OS.
When I type fglrxinfo I receive:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 14
Current serial number in output stream: 14
When I type aticonfig I get:
aticonfig: No supported adapters detected. The proprietary driver was never installed so I know that driver is not interfering. Originally the aticonfig was not found at all but with a little troubleshooting from the link above It seems to work, but obviously not recognize the card. The card works great on my windows 7 setup. If I can't get this working I may just remove Ubuntu all together, but any help would be amazing!
View 1 Replies
View Related
Feb 25, 2011
Card is the Radeon x300 and in the past in a wubi install I installed the propreitary ATI driver. I'd like to do that with this installation too. I've located the proper driver and tried to run in the terminal.
I get this error:
I've read were I have to uninstall the xorg drivers and make a .deb package but idk how to do that.
View 2 Replies
View Related
Mar 20, 2010
I just installed OpenSUSE 11.2 x86_64 on a new computer with ATI Radeon HD 5770 graphics card. I have included ati in the update repositories. I saw that x11-video-fglrxG02 and ati-fglrxG02-kmp-desktop are NOT checked, so, I selected both in YAST2, then, OpenSUSE started to download the required files. but, in the middle of downloading, I got a "wrong digest", said that ati-fglrxG02-kmp-desktop has wrong checksum.
View 4 Replies
View Related
Feb 16, 2011
who has installed these drivers on ubuntu will help me to install ? Because I can not coped...
ati mobility radeon x1400 driver
need me 32bit driver... I found only 64 ...
View 2 Replies
View Related
Jul 30, 2011
I was trying to install this driver of ATI Radeon HD 6370M but i can't do that it works. I googled and visited a lot of pages and I think that I saw a post on this forum talking about a problem like mine. I follow this guide too: [URL] I only want the driver to run gnome3.
/usr/share/ati/fglrx-install.log
Creating symlink /var/lib/dkms/fglrx/8.872/source ->
/usr/src/fglrx-8.872
DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping...
[Code]....
View 2 Replies
View Related
Jul 27, 2010
recently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:
which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN
I have installed kernel sources,xorg x11 headers and gcc.
View 9 Replies
View Related
Jun 14, 2010
I'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies
View Related
Oct 15, 2010
I don't understand how i should install the driver for my code...
View 2 Replies
View Related
Aug 17, 2011
I want to install ubuntu on my Blackberry 9500 Storm1 how do i do this? Also can i do dual boot?and before anyone ask i want to do this because i like ubuntu alot and prefer it to the BB software
View 2 Replies
View Related
Apr 25, 2011
I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.
View 7 Replies
View Related
Mar 13, 2010
I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.
View 9 Replies
View Related
Jun 14, 2011
The display card of my notebook is ATI rd 6370m ,the OS is fedora14. After I installed the driver download from ATI web site, it says that my computer can only run 2D can't run 3D. I want to know if some one used the same card with me in fedora14 has run 3D sussesfully? After the installlation I run "#aticonfig" it says "can't find the adaper".
View 2 Replies
View Related
