Ubuntu Networking :: [10.04] Netgear WPN311 Setup In EVGA-based Machine

Nov 18, 2010

I should preface this by saying I'm pretty much new to ubuntu. I was a nerd back when I used windows, so I'm fairly knowledgeable about it, but I lost interest right before switching to linux, so I haven't learned much past basic navigation.

I bought a WPN311 wireless card for my homebuilt machine a while back and still can't seem to get it to work. One person told me that after upgrading to Lucid it should work out of the box but that's not the case. It seems my computer doesn't even recognize that the card is plugged in. When I open the drop-down menu to choose which network connection to use, any sort of wireless option doesn't even show up.

My machine:

EVGA 112 CK-NF68-T1 motherboard
Intel Core 2 Duo E6750
Two sticks OCZ DDR2 PC2-6400
ATI Radeon X1650 Pro
And the Netgear WPN311 in question

lspci output:

Code:

00:00.0 Host bridge: nVidia Corporation C55 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
00:00.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
00:00.3 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)

[code]...

View 3 Replies


ADVERTISEMENT

Ubuntu Networking :: Netgear WG111 V1 Drivers And Setup?

Jan 23, 2011

I've got a computer with a Netgear WG111 wireless dongle, however I don't have the setup CDs and I don't know how i'd get it working in 10.10 anyway.

View 3 Replies View Related

Ubuntu Networking :: Netgear N600 Wireless Router Setup With 11.04?

May 18, 2011

how to set this baby up with a working Internet connection so I can get on my PS3 across the other room.

View 1 Replies View Related

Ubuntu Networking :: Setup A Ssh Tunnel From Machine A To Machine B?

May 29, 2010

I can set-up an ssh tunnel from machine A to Machine B:-

fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com

I can successfully logon to machine A to Machine B.

what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.

View 5 Replies View Related

Ubuntu :: Setup Workflow To A Terminal-based Setup

Jul 8, 2010

Im trying to set up my workflow to a terminal-based setup, so that accessing my computer through SSH will provide many of the things I need and use right off the bat. I have Mutt working great with my GMail account, so that's good. I do have a question though. Using the application Calcurse (featured on Lifehacker a few days ago, [URL] I am at a loss to figure out how to interface with Google Calendar. Is there a trick that Im missing, or does anyone know of another terminal app that plays better with Google Calendar?

Also, I was looking for a 'Digital Clock', essentially, again, a terminal/text based large print clock; similar to the one in the lower left corner on the attached pic. I was looking for a telnet server from the Atomic Clock, but no such luck so far.....

View 9 Replies View Related

Ubuntu :: Logging Into Netgear Router Setup After Passphrase Change?

Jun 29, 2010

I changed the passphrase in my Netgear WNR3500 router. I got the teenager's win7 netbook back online (wireless) no prob by simply changing the security key in windoze and it didn't effect my connectivity but when I attempt to enter my router setup by entering my local IP nothing happens, no response at all. I've rebooted twice and my connection is still very solid but I cannot access the router setup. The ONLY change I made was in the router's "passphrase".Not a big emergency at this point I suppose but I need to know what I need to change in Linux? Or to rephrase, in windoze7 passphrase=security key. In Linux?I can just reset the silly thing I guess but was kind of hoping I wouldn't have to and besides I anticipate the same trouble when setting the passphrase afterward.

View 1 Replies View Related

Ubuntu Networking :: Setup SSH To Connect To Machine Externally

Mar 21, 2010

I'm using Ubuntu 9.04 x86_64 and trying to setup SSH to connect to my machine externally. The open ssh server is already installed and I can using ssh localhost. Moreover, I also forward port 22 to my machine and check using [URL] Everything seem to be ok, but when I trying to connect using ssh -vvv <ip-address> I receive the following common error:

[Code],,,,

View 4 Replies View Related

Ubuntu Networking :: Setup A Virtual Machine On It Using Vmbuilder?

Jun 8, 2010

I am using Ubuntu 10.04, 64-bit. I am trying to set up a virtual machine on it using vmbuilder. As I understand, I need to set up bridging. If I set up br0, then I cannot get out of the machine. Even a ping to 192.168.1.1 (my gateway) comes back as network unreachable. If I comment out #auto br0, then I can get out (on eth0), but i get an error from libvirt. My /etc/network/interfaces file (eth0 networking works, but libvirt does not):

#auto eth0
#iface eth0 inet dhcp
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.154
netmask 255.255.255.0

[Code]...

View 1 Replies View Related

Networking :: Setup Machine As DNS Cache Server?

Jun 10, 2009

I have set up a gateway machine in debian lenny

internet is shared to the localnetwork by using squid as proxy server Can I improve the performance if I set up this machine as DNS cache server?

What is the result if I set this machine as Primary DNS?

View 3 Replies View Related

Server :: Setup Home - DSL - Netgear Router - DNS - Bind - For Use With Qmail On Cent-OS 5.3

Apr 30, 2010

I would like to setup a qmail server for learning purposes (if you strongly feel Postfix is better, feel free to let me know). When I started setting up qmail (using Life with qmail), it suggested that having a DNS is the best approach. In the spirit of learning, I decided then to create another server for DNS only, and use that for qmail.

My problem is that, as this is a home installation, the internet is behind a Netgear DG834Gv5 router, on a DSL line that has a dynamic IP address. I am using DynDNS, but also don't mind having to update any DNS entries to keep up with the change, this is not exactly a production-grade setup.

In addition, I also have access to another DNS server where I can create authoritive entries for any domain I register. I have done that for a domain, and would like to point part of that to my home DNS so that I can learn.

So essentially, I would like to have a new zone for home.mydomain.org on my home DNS so that I can create new entries for *.home.mydomain.org such as qmail.home.mydomain.org etc. there.

I assume that this would include port forwarding on the router which is not a problem, but I truly have no clue where to start. I have a very basic install of Cent-OS 5.3 (no X and just Base a few admin and dev tools) and just installed the latest RPM of bind (9.3.x).

View 2 Replies View Related

Networking :: Setup Network Printer To Combination Machine

Apr 11, 2010

I have two Linux machines both running Debian (I do not want Windows to be involved at all). One is a desktop and one is a laptop. I desire to connect a not-yet-purchased printer/scanner combination machine only to the internal LAN via my router (Linksys WRT54G) via Ethernet cable, or via wireless if the printer/scanner has that capability. I want to be able to print to that printer (and scan from its scanner) by only having to turn on the printer/scanner and only one of the other computers, and not have to have both Linux machines turned on in order to print and/or scan.

So my questions are:
When I look at specific models of printers, what should I be looking for in their specifications that indicates that this configuration is possible (i.e., should I be looking exclusively for printers that say they are "wireless printers" or "network printers")?The reason I ask this question: In my online searching, I thought "networked printer" or "stand-alone network printer" meant just that, but what I found instead are pages and pages of instructions on how to connect the printer locally to a Linux machine, with the associated setup to allow that Linux machine to serve print requests coming from other machines on the LAN. And that approach is not what I want to do (with the notable exception of temporary setup to validate that the printer is responding to requests for printing and scanning from Linux).

Are there particular brands, makes, or models that I would have better luck in getting to work in this manner (i.e., "better stick with HP or Xerox")? Am I kidding myself that a combination printer/scanner would work in the same fashion and still be relatively easy to set up on both Linux machines without resorting to some Windows-centric approach? Result of my searching so far (I have not worked my way through all of these in detail, but plan to): References to local printer connection which is not what I want:
Setting_Up_a_Network_Printer_using_CUPS
Set up a network printer using cups
Set up a printer

The post inside Setting_Up_a_Network_Printer_using_CUPS that starts with "running an HP Photosmart 8450 as a stand-alone networked printer" (where is the permalink?) is as close as I could get, but I am concerned that the instructions given are specific to the HP Photosmart 8450, or specific to the HP vendor, versus for all printers that can be connected to an Ethernet network (not that being locked into HP is going to be a problem necessarily, but I would like to know why if that is the case). Linux compatible printers says "Have a look at LinuxPrinting for known working drivers for printers data base. Also buy from a linux friendly company, ie HP, Brother, Epsom." Later in that thread, someone said Definitely don't buy canon.

View 2 Replies View Related

Ubuntu Networking :: Setup A Mercurial Code Sharing Server On A Machine

Feb 2, 2011

I'm trying to setup a mercurial code sharing server on an Ubuntu machine but I can't figure out how to get it running. I'm setting up this server on a LAN so I don't want any security. Another thing I should mention is that I'm using Netbeans to code in Java. how use mercurial and tortoise (I've got them installed).

View 2 Replies View Related

Networking :: Setup A PXE Kickstart Installation - File (ks.cfg) Not Picked The Machine

Aug 4, 2010

I am in a VMware environment, and using RHEL 5.4. I am trying to setup a PXE Kickstart installation. For this I have configured DHCP and TFTP, made a kickstart file and shared it in the network through HTTP. My problem is that somehow kickstart file (ks.cfg) is not picked by the machine in which I am installing the OS. Although, the contents of my kickstart file can be viewed over HTTP. Please see KS_Error.jpg.

[Code]....

However, I believe DHCP and TFTP is working fine as I am getting the correct IP 192.168.1.115 which I have set in /etc/dhcpd.conf. Also, my label 1 which I have set in /tftpboot/linux-install/pxelinux.cfg/default is working fine as I able to locate initrd and vmlinuz. Please see attached Image_1.jpg how to troubleshoot this. I need to paste any of my configuration files?.

View 14 Replies View Related

Networking :: Samba Setup - Windows 7 Host - CentOS Machine Using VirtualBox?

Jun 23, 2010

I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines? Please note: I am very inexperienced in the IT field. [URL]...

View 2 Replies View Related

Fedora Networking :: Setup A LAN With An FC14 Laptop - FC15 PC And A Windows Machine Running XP?

Jun 27, 2011

Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.

When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.

Firewalls and SELinux on both machines are disabled. Here are some configuration details:

rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64

[Code]...

View 3 Replies View Related

General :: Setup A Machine Running Drupal CMS On A Debian Machine?

Aug 13, 2010

I'm know very little about Linux but decided to set up a machine running Drupal CMS on a Debian machine and it won't go. The folks at Drupal have tried to help but it seems the Debian OS won't do it's PHP thing for Drupal.

That means i'll have to start at the START I guess.

how to become a master of Linux if one is starting from ABC (I can add and subtract, that's what it feels like)

View 2 Replies View Related

Ubuntu Installation :: 10.10 To Old 1GHhz Athlon Based Desktop Machine?

Jan 14, 2011

I'm trying to install 10.10 to my very old 1GHhz Athlon based desktop machine, but when I boot with the CD in the drive, the machine just hangs at the 1st screen. Pressing Esc during boot to see what is going on, I find that the boot always gets as far as:"Checking battery status..."

As a desktop machine, it doesn't even have a battery. Is there anything I can do about this? Can I disable this check? The CD worked fine in a work machine (and quite nice it looked too btw!)

View 8 Replies View Related

Fedora :: Moving An LVM Based Virtual Machine

Jul 28, 2010

I'm hoping this is the right sub-forum, if not please move this post. My question is, how would I go about moving an LVM based virtual machine to a different host? Can I just use dd to copy the entire logical volume to a file, move the file to the other host, then again use dd to copy the file onto a newly created logical volume? I'm using KVM by the way.

View 2 Replies View Related

Ubuntu :: Web Based Virtual Machine Manager For Server - Open Source

Feb 20, 2011

Are there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.

View 9 Replies View Related

Red Hat / Fedora :: Implementation Of Kernel-based Virtual Machine

Jun 9, 2011

I'm Redhat 5 user, and I want to implement Kernel-based Virtual Machine. I tried too much search in google but I cant find the perfect instruction regarding it.

View 3 Replies View Related

General :: Unable To Launch GUI Based Installer On Machine

Dec 8, 2010

When i tried to launch 2012 installer using GUI based command , it gives the following error message :-

Error:-

It is Observerd that ( but not sure ):-

It is looking for = > ./u01/app/oracle/product/11.2.0/dbhome_1/lib/stubs/libXm.so.4.

I tried soft linking libXm.so.3 with libXm.so.4 but it doesn't help. Also tried downloading Openmotif and installing, its asking for many dependency packages.

The following packages are also reported to be missing:-

When i try to download and run rpm on these, it gives dependency problem. And these dependencies seem to be deadlocked. I don not understand how i can go about it..

View 9 Replies View Related

Ubuntu Servers :: Setup SFTP To Use Key-based Authentication?

Nov 18, 2010

I want to connect to the same machine that that I have OpenSSH server on which uses keys and I have disabled password-based logins (for ssh). Apparently, this also affects SFTP which makes sense. How do I setup SFTP to use key-based authentication?

View 5 Replies View Related

Ubuntu Servers :: Setup On Non Web Mostly Data Based Via Sockets

Jan 24, 2011

What ubuntu server setup will work the best on a non web mostly data based via sockets (mysql php phpadmin) will be the easiest to use and what sockets to use? Lamp?

View 1 Replies View Related

Ubuntu :: Nvidia 570 GTX Evga Won't Play Audio Over HDMI?

Jan 14, 2011

I recently built a new computer and got an evga 570GTX (Nvidia)I was using windows 7 pro that I got for free from school (MSDN or something) but it was crashing every 5 minutes. I could get on a play a game for 4 hours, but cuz cursing around or surfing the web was crashing all the time. Complete freeze. Couldn't start the task manager, number lock and caps lock jammed ect...

I was starting to think it was my MOBO failing because of the reviews until I installed ubuntu and everything was fine, no crashing no bull$#!7 no evil sauce.

Only problem was I installed 10.04 and fought it for a day with no luck installing the graphic card drivers but today I installed 10.10 and it picked up the nvidia drives right away.

Now the only problem I am having is audio.

In Windows I could play audio over the HDMI cable but in ubuntu I cannot.

I've tried using a headphone cable and that doesn't work either, and I know it's not the cable or the green sound port on my MOBO because other speakers work in the port, headphones work, all the cables work ive tested them on other computers and speakers and in cars, so the only thing left is the OS. I want to be able to play audio from the computer over the hdmi cable to the TV.

I've played around in the sound settings for hours... NOTHING.

I dont get how something as simple as audio over HDMI or a headphone jack/cable can be done by windows and not UBUNTU!

View 9 Replies View Related

General :: Difference Between I386 And I686 Architecture Based Machine?

Jan 9, 2011

what exact difference between i386 and i686 architecture based machine. Both suppose to be using 32 bit OS ?

View 4 Replies View Related

Ubuntu Servers :: How To Setup Based Cluster Configuration For Each Node

Jun 27, 2010

I need to setup an linux cluster ..so i prefer ubuntu because of support and i personally i use ubuntu.. and can any one explain in breif ..what all the things needed to setup an ubuntu based cluster my configuration for each node will be (totally 6 nodes) core2 duo with 4 gb ram i need 4 nodes and 2 for load balancing..

View 1 Replies View Related

Debian :: Setup A Web-based Secure Ftp Client?

Jan 29, 2010

I am trying to setup a web-based secure ftp client that can handle not only file transfers to and from one of my company's servers, but also allow new clients of ours to visit our site, create an account of their own and use it to log in and begin transferring files. This way, the users can manage their own accounts.

I don't know a lot about exactly what is running on our server, though I am almost positive it is debian based. I really only have access via ssh and ftp. I may be able to do more in the server room, but haven't tried. I thought about using net2ftp, but that doesn't seem to work with sftp, and also doesn't allow the creation of new users on the server.

Is there anything out there for me??You will undoubtedly require more information from me, so please let me know what it is and where I can find it and I'll get back to you as quickly as I can.

View 3 Replies View Related

Server :: Have A OS Based On Debian Configured And Installed On A Machine That Controls All The Network?

Feb 23, 2011

I want to know something: i have a OS based on Debian configured and installed on a machine that controls all the network. Then, I can access it via another machine (with Windows for example) (connected by crossover cable or using a switch) by a web browser where I can do everything, including adding hosts, adding users, configure mail servers, voip, configure domains, etc etc etc..I would like to install Nagios on my server but I would like to monitor the hosts, routers that I have on the network using the Windows machine. How can I do that? Isn't it supposed to access the nagios information only in the machine where it is installed?

View 3 Replies View Related

Networking :: Using Netgear WPN111 With Ubuntu 10.04

Jul 24, 2010

Using Netgear WPN111 with Ubuntu 10.04 getting the above up and running.

View 2 Replies View Related

Ubuntu Installation :: Evga Sr2 - 64bt Recognise The 48gb On The Of Memory Available On That Motherboard

Jun 5, 2010

Would ubuntu 64bt recognise the 48gb on the of memory available on that motherboard,,, and would it recognise the the 2 CPU's that are installed on that motherboard.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved