Fedora :: Upgraded To FC14 From FC12 - System Fan Blows Full Speed Constantly?
Dec 31, 2010
I upgraded from FC12 to FC14 and now the system/case fan blows full speed constantly. I also moved from i386-PAE to am64.
The CPUs are cool, the machine is basically idle, and the fan noise is really annoying (and blowing cool air).
In FC12 the fan would auto-adjust with CPU load. This is not the case now.
I ran sensors-detect and it doesn't seem to find my fans:
[root@pangea modprobe.d]# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0C (crit = +75.0�C)
k8temp-pci-00c3
Adapter: PCI adapter
code....
I don't remember ever having to even run sensors-detect in FC12. I searched the board for a bit and didn't see any solutions. I'll attach the full output from sensors-detect.
View 2 Replies
ADVERTISEMENT
Jan 11, 2010
Does any one have a way to speed up the internet on Fedora 12? I have a dual boot system with Vista x64 on the flip-side, and my wireless connection there is just fine. But when I get on this side, it goes back to the dial-up days (yes I said the DU word). yum updates seem to be just fine, and e-mail seems to be fine. just firefox is slow. And now that I put the x64 Flash in (thanks to leigh123linux), with that working too it seems even a little slower again.
View 3 Replies
View Related
Dec 26, 2010
I tried this kernel released on Dec 21th. It makes my F14 constantly suddenly freeze in GUI with no keyboard/mouse response anymore before restart. Only thing to do in this situation is press power-off button and after restart I found no hint in logs.My laptop is thinkpad t400 and I think it's a very common installation.Now I revert to older kernel 2.6.35.9-64.fc14.i686 and it's works quite well.
View 14 Replies
View Related
Nov 28, 2010
I was recently messing around with the partitions on my tri-boot system and ultimately messed everything up. After a few hours of tinkering I was able to recover but learned something interesting in the process.Something has changed with FDISK, or some underlying component, from FC12 to FC14. I keep partition backups so when I mess things up, I restore using dd. Anyway I think I was restoring partitions at the wrong starting blocks as some partitions worked while others did not. I just happened to notice the start for sda1 on FC14 and said to myself, that's not right.
Anyway take a look as the 'fdisk -l /dev/sda' for FC12 and FC14. What gives? My backups were all made on an FC12 install and when I restored from an FC12 boot CD all is well. Anyone know what the deal is? Should I recreate all my backups again using FC14? Not sure how the boot sector is affected with this FC14 sda1 start at 64.
HTML Code:
*** FC12 x64
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 2 Replies
View Related
Jun 29, 2011
I upgrade from FC12 to FC14 on Monday last. Yesterday, I noticed that CUPS wasn't running, so I looked at services and started it manually. The services appeared to be set to start CUPS automatically, but today again it wasn't running. Looking at messages, I now have the following 'errors' that appear to be disabling CUPS due to some form of load dependency.
Message log extract:
[code]....
View 6 Replies
View Related
Dec 29, 2010
From at leat FC12 to FC14, I notice that the form we have to fill in to write a filename (for example) don't give anymore the choice of the file which already exist in the current directory.I explain :Use gimp or geditCreate a simple file : example.txt or xample.jpgnd save this fileclose this filecreate now a new filetry to save it under the name: exand in FC9, the system added one line to propose you example.txt because example match with ex you just typedin FC14, this proposal doesn't exist anymore.How to setup it again ?I am working with gnome but the problem is the same with kde
View 2 Replies
View Related
Oct 20, 2009
I am trying to install Fedora 11 from a DVD. Not the live DVD, the full DVD and it hangs constantly. I had to wait 10 minutes for it to Find Storage Devices, 10 minutes to input a root password and now I am waiting for the drive shares to be setup. It's already been 10 minutes. I verified the disk and everything was fine. Why is this taking so long?
View 4 Replies
View Related
Apr 4, 2011
Trying the various settings (and noticing ubuntu gnome users recently had the same exact OPPOSITE problem -- they can't SHOW hidden files in dolphin) to hide my hidden files in dolphin is not working. The settings are saved OK, but those damn (ending in tilde, ie "~") files do NOT ever hide! I even see the correct little green recycling symbol on them, indicating they're identified as such, but no actual hiding goes on..
Nautilus, which I've used before (but have grown tired of, and was looking forward to dolphin), also has a weird issue that seems to have appeared with FC13 (I'd been using FC12 'til now mostly because of this) - there's no way (AFAIK) to tell it to show the location; to see it, you have to click Go->Location each time. Previously I could set it to print out the whole file or server path and it would stay that way when I opened new windows.. This is on fresh install & update.. kernel is 2.6.35.11-83.fc14.x86_64.
View 1 Replies
View Related
Dec 2, 2009
I recently installed F12 on my main notebook and ever since the fan has been running at full speed (or near full speed). According to the 'sensors' command I usually have temperatures between 50-70. I didn't have this problem before the installation.
View 2 Replies
View Related
Jan 6, 2010
New Compaq 610. All good so far but the fan seems to be on continually. Checked load cycle count and seems to be okay so far.
Any ideas? It wasn't doing this before and don't remember doing anything to make it happen but I have been tweaking a bit while setting up the machine.
Hardy 8.04.3 LTS (rocks!)
View 1 Replies
View Related
Aug 19, 2011
I'm fairly new to fedora. I used Fedora 14 on a virtual machine just to mess around with it a little while back but thats about it. As far as linux goes, I just test a bunch but can never seem to pull myself away from windows. I am hoping this is the time but these issues are the weirdest I've seen on any linux distro ever. My GPU (Radeon 5750) is running at 69C idle and the fan is at full speed. I am not overclocking it at all and I'm using the default drivers that came with fedora. It works just fine in windows and a lot cooler. How can I fix this?
I'm running the Gnome 3 desktop version, which I am also getting some graphics artifacts. In the bottom bar I get a dashed white line that comes up every time I boot and goes away when I make the bar expand. Also in the applications window I get the same dashed line at the top of the window and sometimes the top of the scroll bar. So far I really like Gnome 3 (Idk why everyone is whining about it) and I'd like to stick with Fedora, and linux for that matter
View 9 Replies
View Related
Apr 6, 2011
I am using FC 14 on my laptop (Dell insprion 1525). When I installed vlc it worked nice, but about 2 weeks ago after updates, each time when I run vlc, after short time running (about 10 - 20 seconds). All system suspends (actually computer responds very lately).
View 14 Replies
View Related
Jan 3, 2011
I installed on this laptop two OS : Windows XP SP3 with drivers for M11 from Toshiba download site Fedora 14 64 bits I have no problem running Windows but sometimes when I run Fedora I hear fan starting to run at full speed then computer hangs. When this occurs, I must power off it using switch then reboot and I lost my work. I try to run Memtest86 during a full night and I did not get any error or hang.
Is there somebody who already installed Fedora 14 on Toshiba Tecra M11? kernel is 2.6.35.10-74.fc14.x86_64 and my graphic card worked fine with hardware acceleration out of the box.
[Code]...
View 4 Replies
View Related
Feb 19, 2010
I'd like to see all messages given out by my fc12 system. So no graphical interface shows up when I shall type the bootloader-password or log-in with my user.
View 1 Replies
View Related
Jun 11, 2010
Can't use Internet all of a sudden. Same IP address, Gateway, etc... as Windows.
Linux --> Can't use Internet
Windows --> Internet OK?!
The Gateway disappears on its own.
The IP address and everything else automatically resets to a blank and doesn't save my settings even though I clicked it to save. Restarting the computer doesn't help either.
View 14 Replies
View Related
May 26, 2010
I've upgraded to 13.1 from 13.0 but can't startx. I get this error;
'call to lnusertemp failed (temporary directories full?)'
When I ctl-alt-backspace there are numerous messages including these two;
'/usr/bin/kde4-config: symbol lookup error:/user/lib/libkdecore.so.5:
undefined symbol: _zn9qlistdatadetach3ev.
and
startkde: error: could not locate lnusertemp in /usr/bin/startkde: line
302::command not found.
Linux 13.0 worked OK right out of the "box" so I don't understand why this version has this problem. Was something changed from 13.0 to 13.1?
View 6 Replies
View Related
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
View Related
Dec 30, 2009
I have installed Fedora Core 12 and all seems fine. I have also set up the main repositories as was suggested on the following fedora set up guide website: [URL]. I have since tried to update my Fedora release with all the updates available, alas I get the following error message:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
View 4 Replies
View Related
Mar 9, 2010
I just install FC12 after all settings are done I install nvidia driver for PAE kernel whit the command # sudo yum install kmod-nvidia-PAE after reboot the system is not able to boot again.What I can do to uninstall the driver?
View 1 Replies
View Related
Nov 5, 2010
have a " Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)" NIC.I was unable to set it 1000bit and full duplexThe output lspci -v as below.Quote:
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 8432
[code]...
View 3 Replies
View Related
Jun 8, 2010
DG31PR Intel Corporation with Lucid 32 bit. how to get the CPU fan to normal speed. I googled a bit around but so far no success.
View 3 Replies
View Related
Jun 24, 2009
I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.
Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).
View 14 Replies
View Related
Jan 10, 2010
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies
View Related
Mar 11, 2010
No error message given and system still works. Same result on Ubuntu, Chrunchbang and Fedora 12. Maximum speed 533 but size is recognised. Tried on another machine all is well.Errant hardware is ASRock N68-S with AMD AthlonX2 5050e. Stated as compatible on the asrock ref.
View 4 Replies
View Related
Sep 8, 2010
I gots pci expansion fan yesterday, thinking it would suck air from the card out of the computer. instead, it blows onto the card sucking in "fresh" air from outside. Is this effective?
View 2 Replies
View Related
Apr 18, 2010
I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
View 2 Replies
View Related
Aug 29, 2015
I have a Compaq 8710w and after upgrading to the latest Debian/testing (Linux version 4.1.0-1-amd64)the fan runs at full speed all the time. There seems to be something strange with the temperatures reported by temp4, it is stuck at 100 degrees.:
Code: Select allroot@...:~# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +16.0°C (crit = +105.0°C)
temp2: +38.0°C (crit = +105.0°C)
temp3: +22.6°C (crit = +110.0°C)
temp4: +100.0°C (crit = +110.0°C)
temp5: +37.0°C (crit = +110.0°C)
[code]...
I found this related problem: URL... . Note that here the problem is that the fan does not spin and that temp4 reports 0 degrees.
View 5 Replies
View Related
Feb 8, 2010
one of my Evga GeForce 9500 GT's fan started acting up today. It is wobbling, vibrating loudly, and not spinning at full speed. And while I believe the card is still under warranty, I'd rather just buy a new fan and put it inmyself avoiding the hassle of sending it back and waiting for a replacement (and most likely refurbished) one. That being said, does anyone know where I could buy just the fan? Google has turned up nothing so far but the numbers on the fan are A4010-45LB-2UN-C1 and FA7C0412MA-SBNNA but I have no idea what these numbers are; the manufacturer is Cooler Master.
View 1 Replies
View Related
Dec 8, 2010
I'm having an issue my suse 11.3 just freezes out of no where several times during the day. this is the out put of /var/log/messages right before it freezes I have many of this:
Dec 8 21:48:03 linux-md1h kernel: [ 30.889715] [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 1
Dec 8 21:48:03 linux-md1h kernel: [ 30.889716] [drm:drm_edid_is_valid] *ERROR* Raw
[code]...
View 9 Replies
View Related
Apr 6, 2010
I have installed Ubuntu from scratch several times since this problem started in Ubuntu 9*. It happens over and over again, and nothing seems to help.
My grasphic card is Nvidia 8500 GT. No matter what I try, to use no hardware drivers or use the recommended driver for Ubuntu my system shuts down without warning. I have used Ubuntu since 2004 and this is the worst bug I have ever experienced!
Is there a way to get rid of this thermal awareness program? Everything functioned fine until this stupid heat problem occurred. I want to turn it off but not to leave Ubuntu.
Lasdt night I was busy installing WinXP when my computer suddenly turned off, and Ubuntu could not be started again. Only show a screen with black and white parts and no desktop. Thats why I had to install Ubuntu again, and it turned off today while I use Firefox. Its the worst bug I have ever experienced.
View 3 Replies
View Related
