Hardware :: Upgrading From NVidia GeForce 9500 GT Video Card
Dec 12, 2010
I am planning on upgrading the video card in my computer, an NVidia GeForce 9500 GT video card, to something that can handle at least 1600x1200 24-bit resolution without noticeable choppiness other "slow-downs" in graphic display. The card in question does have one gigabyte of RAM, but the type of memory it utilizes is DDR2 instead of something, i.e. DDR3 and above, with greater speed. Admittedly, the system in question is used for gaming as well as work. I want to stick with the NVidia brand because it has worked well for me, but I am not sure what would be the correct line of cards to use.
View 4 Replies
ADVERTISEMENT
Jan 1, 2011
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
View 2 Replies
View Related
Jan 5, 2010
I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:
Section"Driver"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section"Monitor"
Identifier "Configured Monitor"
EndSection
[Code]...
I tried changing the driver from "vesa" to "nv" without any effect. Does anyone have any idea what I should do to get this to work?
View 9 Replies
View Related
Apr 15, 2010
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies
View Related
Feb 8, 2010
one of my Evga GeForce 9500 GT's fan started acting up today. It is wobbling, vibrating loudly, and not spinning at full speed. And while I believe the card is still under warranty, I'd rather just buy a new fan and put it inmyself avoiding the hassle of sending it back and waiting for a replacement (and most likely refurbished) one. That being said, does anyone know where I could buy just the fan? Google has turned up nothing so far but the numbers on the fan are A4010-45LB-2UN-C1 and FA7C0412MA-SBNNA but I have no idea what these numbers are; the manufacturer is Cooler Master.
View 1 Replies
View Related
Jan 18, 2011
Built a custom pc using a Gigabyte mobo and amd processor. Mobo has onboard video. Ubuntu Maverick installs fine using on board video but when I put in the Nvidia Geforce GT 240 I get either no video or scrambled video. I've tried disabling the on board video and still no luck. I've also tried to install nvidia drivers first, and will get it to work but video is not crisp and will not show all of the screen.
View 4 Replies
View Related
May 6, 2010
I cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.
If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.
View 3 Replies
View Related
May 21, 2010
I have thrown together a frankenstein of spare parts to stream video onto my TV. The GPU is a NX6800GS (geforce 6800). I have used the restricted driver tool to intsal the recommended driver. The VGA output works fine. My problem is that when using the nvidia tool to set up my TV through S-Video on the graphics card, the TV is not detected. This puts me at a dead end, as every how to guide on this forum assumes the nvidia control panel can detect the TV. Can i force video to play over the S-Video port? Do i need some magical unicorn drivers for the card? Any help is appreciated (even a simple "this setup will never work").
View 9 Replies
View Related
Nov 12, 2010
My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?
View 1 Replies
View Related
Feb 17, 2011
Is there anything special I need to do to use this card in conjunction with Fedora 14? It's been acting a little strange lately. Also I think the card may have some type of 3D support although I'm not entirely sure on that.
View 1 Replies
View Related
Jan 22, 2010
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies
View Related
Mar 11, 2011
anyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.
View 5 Replies
View Related
May 8, 2011
My 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?
View 1 Replies
View Related
Apr 28, 2010
After installing "nvidia-driver" and "nvidia-kernel" through "sbopkg" I ran "glxinfo | grep -i nvidia" as user (not root) Shows: "Xlib: extension "GLX" missing on display ":0.0". GLUT: Fatal Error in glxinfo: OpenGL GLX extension not supported by display: :0.0" I'm really sure that there is a problem with this or error instead. Or is there any other way of installing nvidia..? "uname -a" "Linux purple 2.6.29.6 #2 SMP Mon Aug 17 11:58:18 CDT 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux"
Quote:
Linux is not user-friendly. It _is_ user-friendly. It is not ignorant-friendly and idiot-friendly.
View 27 Replies
View Related
Feb 3, 2010
I changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?
View 1 Replies
View Related
Mar 23, 2011
This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.
Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.
View 5 Replies
View Related
Jan 28, 2010
I have a problem with a new GeForce 8600GT graphics card. I just installed the card into my Dell Optiplex 745. When I boot the PC I have no image until the Ubuntu logon box comes up. No bios info, no boot menu, no grub menu, nothing until the Ubuntu login. Once I get to the logon prompt everything seems fine except when I use CTRL+ALT+F1 to get to a console. Then I get nothing but a blank screen. When I press CTRL+ALT+F7 my desktop loads fine and all is OK again. I had a problem trying to get the nVidia drivers installed because I didn't have a usable console. I had to use SSH to install the drivers. I'm using this card with an HP 1755 flat panel that's about 5 years old and a Dell Optiplex 745 with Intel Dual-Core CPU.
View 8 Replies
View Related
May 6, 2010
I recently upgraded to Lucid from Karmic and shortly before the release upgraded from a geforce 8400gs to my geforce GT240 and noticed no difference on Karmic. I read somewhere that the capability of video cards would be applied further with Lucid. Since installing Lucid I've noticed a severely reduced sharpness and severely increased contrast, changing the contrast in X server has no effect. My hardware driver is activated but not in use and no online fix I've attempted has been successful in resolving the issue. Is it possible to use a gt240 on lucid with no hassle and is there any way I can maximize my video cards capabilities?
View 2 Replies
View Related
Jan 25, 2010
I already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.
The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:
Graphics Card: nVidia G92, GeForce 8800 GT
System: Ubuntu 9.10 Karmic, 2.6.31-17-generic, 4.4.1 (x86_64-linux-gnu)
Processor: AMD Athlon 64 X2 Dual Core 4200+ (3 Gigs RAM)
We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.
[Code]..
View 9 Replies
View Related
Aug 11, 2010
When trying to install Fedora 13 64 bit, I get no X windows but do get text.Video is nVidia Geforce GT 8 360M with 1gb vram. the Live DVD I get a checker board display.
View 7 Replies
View Related
Jun 4, 2011
i am having trouble installing xubuntu 10.04 with my evga geforce 6200 video card. My motherboard has the onboard intel 845g? card. The computer will not read the live cd with the video card installed. it hangs on the splash screen right after choosing " try without installing" i have tried nomodeset but that dose not help. I have no problems installing with the video card removed. My computer i a hp pavilion a647c.
View 2 Replies
View Related
Mar 31, 2010
I have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)
View 3 Replies
View Related
May 5, 2010
I installed Lubuntu 10.04 yesterday (yay, my first serious installation!), and I was trying to install the drivers for my video card (GeForce 6200), when it told me that it couldn't use ld. After oing some research I found out that it was in binutils. So I went over and got it and tried to ./configure it when it told me that there weren't any C compilers in $PATH, so I went over to the gcc homepage with a fine-toothed comb and found gcc 4.5.0. When I tried to./configure it, it also told me that there aren't any C compilers in $PATH.
View 4 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Jun 23, 2011
How to install Nvidia 9500 GT with nvidia driver.
View 5 Replies
View Related
Nov 8, 2010
Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies
View Related
Dec 22, 2010
so I've got a openSuse 11.3 machine with KDE. As graphic card I've got a 9500GT and as display a syncmaster 570b. Now both work fine with other products (9500GT works fine on my other display and my Windows laptop works fine with the syncmaster 570). I beleive it's because of the frequency. here's a list of frequencies supported by the 570: Technische Daten zu Samsung Syncmaster 570B - TFT Monitor bei dooyoo.de
I also installed nvidia drivers via yast2. But how do I change the frequency? I've been trying to solve the problem for hours. Oh yeah when I connect my 570b to my 9500gt, I sometimes get a picture and sometimes don't. However when I get a picture colors are very strange and it flickers hardly.
View 9 Replies
View Related
Feb 25, 2010
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
View 2 Replies
View Related
Apr 8, 2009
Which of these cards is better for linux nvida gforce 2 ultra bladerunner or ati rage128 pro 32mb
View 7 Replies
View Related
