I want to install ubuntu on my Blackberry 9500 Storm1 how do i do this? Also can i do dual boot?and before anyone ask i want to do this because i like ubuntu alot and prefer it to the BB software
View 2 RepliesAfter closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
I (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..
View 1 Replies View RelatedHow to install Nvidia 9500 GT with nvidia driver.
View 5 Replies View RelatedHow do i install my blackberry bold software onto Linux?
View 1 Replies View RelatedI am planning on upgrading the video card in my computer, an NVidia GeForce 9500 GT video card, to something that can handle at least 1600x1200 24-bit resolution without noticeable choppiness other "slow-downs" in graphic display. The card in question does have one gigabyte of RAM, but the type of memory it utilizes is DDR2 instead of something, i.e. DDR3 and above, with greater speed. Admittedly, the system in question is used for gaming as well as work. I want to stick with the NVidia brand because it has worked well for me, but I am not sure what would be the correct line of cards to use.
View 4 Replies View Relatedso I've got a openSuse 11.3 machine with KDE. As graphic card I've got a 9500GT and as display a syncmaster 570b. Now both work fine with other products (9500GT works fine on my other display and my Windows laptop works fine with the syncmaster 570). I beleive it's because of the frequency. here's a list of frequencies supported by the 570: Technische Daten zu Samsung Syncmaster 570B - TFT Monitor bei dooyoo.de
I also installed nvidia drivers via yast2. But how do I change the frequency? I've been trying to solve the problem for hours. Oh yeah when I connect my 570b to my 9500gt, I sometimes get a picture and sometimes don't. However when I get a picture colors are very strange and it flickers hardly.
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
one of my Evga GeForce 9500 GT's fan started acting up today. It is wobbling, vibrating loudly, and not spinning at full speed. And while I believe the card is still under warranty, I'd rather just buy a new fan and put it inmyself avoiding the hassle of sending it back and waiting for a replacement (and most likely refurbished) one. That being said, does anyone know where I could buy just the fan? Google has turned up nothing so far but the numbers on the fan are A4010-45LB-2UN-C1 and FA7C0412MA-SBNNA but I have no idea what these numbers are; the manufacturer is Cooler Master.
View 1 Replies View RelatedWhen I first got my BlackBerry, USCellular said I couldn't tether with Linux. That's not so, all you need is BlueTooth (USB adapter, built in, whatever)
You just install Blueman
Code:
sudo apt-get install blueman
Search for your BlackBerry, Pair it to your computer, then go to Devices > Serial ports > Dial Up Networking.
Your wireless connection should be in Network Manager. NOTE: You may have to right-click on NM and setup Numbers, Passwords, Usernames. I did.
how do i access the files on my blackberry's memory card? also is there a way to see ALL the files (like the system files and everything) on the phone?
View 3 Replies View RelatedIf anyone knows how to use the blackberry pearl as a modem on ubuntu desktop latest version.
View 3 Replies View RelatedI was just curious to see if anyone could help me setting up my bb curve to be used as a modem for my laptop. Laptop is an acer aspire, the phone is bb curve 8330 n I'm running ubuntu 8.10
View 1 Replies View Relatedi just recently got a new blackberry pearl 8230 smartphone thingy and iv been trying to find out how to load music onto it and i cant seem to do it, the disk it came with is for windows and i tried running the program through wine and it wouldn't work, so i was wondering how would i go about obtaining the programs to do this if there are any out there?
View 2 Replies View RelatedI was just wondering if Ubuntu developers were thinking now or in the future of introducing support for RIM BlackBerry devices?(I have previously read comments from Apple device users (iPods etc.) questioning why their devices were not supported so I suppose I am just evening things up a little for us BlackBerry users out there!
View 2 Replies View RelatedI have two MP3 Player device and 1 old Blackberry phone(they could be connect to PC with USB cable). All of them works fine with Windows 7. Now I want to connect them to my Ubuntu 10.04.
When connected,There is absolutely no information about my devices either by dmesg, lsusb,mount or fdisk -l, gvfs-mount -l,cat /var/log/messages.
I have tried following but not work:
1.logout and re-plug my device then login again; plugin my device and reboot;
2.modprobe uhci_hcd ehci_hcd usb-storage and re-plug my device
3.add uhci_hcd ehci_hcd usb-storage lines to /etc/modules .
4.install mtpfs mtp-tools packages and use it in rhythmbox.
5.remove any other USB devices and re-plug my device.
The strange thing is, my kindle reader is worked fine with 10.04, but either my MP3 players or my old Blackberry phone is not identified by 10.04. Maybe All of the un-identified devices is USB1.X, but I'm not sure, or if there is some problem with old USB support.
My MP3 player identified as two device with Windows 7, one is USB CDROM, another is USB Mass storage.
I have a USB hub with one usb mouse and one USB key board, both works well with 10.04.
If you want to put your dvd to another portable device,what do you often need? I want to put my dvd to my blackberry.
View 2 Replies View Relatedhow to use my blackberry curve as a modem for my laptop. My laptop is an acer aspire 5670 n I'm running 8.04 on it. Its a blackberry curve 8330 I want to use as a modem.
View 1 Replies View RelatedI bought a micro sd card for my BB 9000 and having a lot of trouble with it. windows as it just doesn't work or maybe it is that the card i bought is faulty? Probably too late to get my money back from paypal now :0(. I did this
$ lsusb
Bus 002 Device 006: ID 0e8f:0021 GreenAsia Inc.
Bus 002 Device 005: ID 17a0:0001
Bus 002 Device 004: ID 04a9:2207 Canon, Inc. CanoScan 1220U
[Code]....
while the BB was connected. And you will see byt the attached pic that the sd card is not mounting. I can't see where the card is now. The file manager did list it but can't remember where. With all the other drives(i have 2 hard drives) but now i can't see it. There is some confusion as to wether the music that the BB software i used via windows put the music on the BB device or the card. Different things say different things. The filemanager on the BB suggests the files are on the card but when i go to add more files i get an error saying the device is full. The device can only hold 1gb of files including installed apps. I probably haven't mentioned everything here as this is doing my head in. I have been battling for weeks with it and i wish i had of known earlier that the card might be faulty so i could have got my money back.
syncing their blackberry with Fedora 11. I followed the how to but haven't had any luck.
View 8 Replies View RelatedI have a blackberry bold and I am running squeeze with gnome. I want to be able to pull files off the bb via usb. When I connect the bb to my computer, the bb asks me to key in my password. Also, Under Places -> Computer, I can see an icon for the blackberry.
However, when I double click on the blackberry icon it does not open. Running "mount /dev/sda1" from the shell, I get "mount: mount point /media/sda1 does not exist".
HOWTO: Sync Contacts between BlackBerry and Evolution on Fedora 10
1. Overview
Open source tools are available to sync a BlackBerry with Evolution but it appears these tools are not supported by Fedora 10. The main thing that seems to be missing is the Barry plugin for OpenSync. Maybe the reason that this package has not been created is that Barry requires OpenSync version 0.22, whereas F10 ships OpenSync version 0.36. This HOWTO explains how to build all of the required components from source code. If the required package becomes available, this HOWTO would then be redundant.
This entire build and installation is performed in the home directory of a non-root user to ensure that no system files are broken. Some of the commands in this HOWTO must be run as root, when this is the case it is stated explicitly and otherwise the commands in this document should be run under a non-root account. The username for the examples below is erik.
2. Be a Developer
When you install F10 you are prompted to specify the uses to which your computer will be put. Hopefully you selected software development, if not your machine will probably be missing many of the utilities required for this HOWTO.
3. Initialize Evolution
Open Evolution and click on all of the buttons at the left to ensure that the necessary databases are created.
4. Prepare The Environment
[Code]...
I've got a Blackberry Bold and I'm trying to find a program to sync it with kontact, does one exist?
View 5 Replies View RelatedI have a Blackberry Bold 9000 that I would like to be able to sync with Kmail. Once I do this, I can be rid of the last bit of Windows I own (Windows Vista) on my laptop. Also, will I still be able to perform Blackberry software updates as required from my Linux sync? Once I have this solved I can get rid of Windows, and put OpenSuse on my laptop too.
View 2 Replies View RelatedI just connected my BlackBerry to Linux via USB cable. How do I know which device in /dev it actually is?
View 2 Replies View RelatedIt seems that I can see my BlackBerry Curve (Verizon) on Rhythm Box...but I can't (for the life of me) figure out how to sync the music on Rhythmbox to my BlackBerry...(see screenshot)
I have a .is_audio_player file in the root of the BlackBerry device as well...
Code:
[christian@fedora-laptop 7713-989E]$ pwd
/media/7713-989E
[christian@fedora-laptop 7713-989E]$ ll -a
total 160K
[Code]....
I want to connect my blackberry mobile phone to connect with my Sendmail / Dovecot service... Is it require some extra settings??
View 3 Replies View RelatedI upgraded from OpenSuSE 11.1 to 11.2 and now the software bbtether/berry4all is unable to gain a hold on the blackberry. I get connection timed out errors with no hope in sight as to what is holding this BB hostage.
Berry_charge is not the culprit as it has been de-registered. I did notice one difference between 11.1 and 11.2--it appears usbcore.ko has been compiled in with 11.2 and doing an lsmod on 11.1 yields usbcore as a module where 11.2 does not--not sure if this is by design.
I am not sure what is going on here but I suspect their is something/some_module not allowing me to get a connection to this device.
Bare install of 11.1 and 11.2 on the same piece of hardware (Dell Latitude D600) too by the way--nothing has changed but the release! This all worked great on 11.1--I don't understand it...?
i was wondering if it is possible too use the DD command to make an image file of my blackberry 8330?i need it of the onboard memory and not the external memory card.
View 1 Replies View RelatedI managed to get my hylafax server nice and going, I also setup up AvantFax and Faxy to reach it from the web..What I still want to do it to send a mail from my blackberry device with a JPEG attachment, and have it forwarded as a FAX to the recipient fax machine...
I read and saw a few documentation here and there, but it is very confusing for me...
courier-faxmail seemed nice, but it conflicts with Hylafax..
Hylafax help support is unclear to me...
I'm not sure jpg attachments from blackberry are "standard" jpg, and, I have no idea how to forward this as a fax...
For what I understood, I need to have a running mail agent on my server, and a script to forward this to hylafax..