General :: Ubuntu - Connecting Monitor To Laptop
Jun 24, 2011
Is there any way, how to make connecting monitor to my laptop as easy as it is e.g. in Windows? Just plug-n-play? I've just installed last version of Ubuntu and then connect monitor. After connecting monitor nothing happened (my laptop LCD doesn't get blinked and it doesn't try to use the monitor as a second one). So I went to Monitors configuration, where I saw "Mirror screens". I've unchecked "Same image in all monitors" and applied, also nothing happened. The monitor is still just black. Is there any application which would make this stuff easier for me? I have HP ProBook 5320m with some Intel HD graphic card inside and 21.5" LG W2240T-PN monitor.
View 3 Replies
ADVERTISEMENT
Apr 19, 2015
I have a laptop and an external monitor connected via displayport. I can configure both displays via settings with correct resolution and arrangement. However, this configuration is not sticking, and every time I shut down the laptop or close the lid I will need to fight with black screens and more to bring the same configuration again. Basically, it seems that the monitor is "stealing" the primary role to the laptop's native screen (I have it configured as secondary, but also being primary the configuration gets messed).
After many trial & errors, this is the routine I have found to make things work every time I boot / awake the system:
1. Boot. Laptop's display shows the booting sequence.
2. When the login screen should appear, laptop's display goes black, monitor shows background.
3. If I press F9 to increase brightness, the brightness icon appears in the monitor, but it is stuck at the minimum.
4. The only way to leave this point is by pressing F7 (project screen) and then F9 again to increase brightness. Then the laptop's screen does light up.
This is when I'm lucky. Sometimes the configuration goes mad and I get mirrored displays and different resolutions, without touching the settings myself. Also, if I unplug the displayport I run the risk of getting stuck with a black screen in the laptop, without any way of recovering the GUI other than rebooting (Ctrl Alt F2 will still show the command line screen).
My system is Debian 8 testing up to date, running in a Lenovo T430 with Intel components. I'm not sure the monitor is relevant here, but in any case it is an Eizo CS240.
View 3 Replies
View Related
Mar 30, 2011
ive installed ubuntu for netbook on my laptop, everything went fine, it installed ok, and it was all good, until i tried clicking on the icon im supposed to click on to get conncected to wifi. where it's supposed to have various wireless networks it says "device not ready (firmware missing)" and ive tried everything i can think of to get it working, but it wont work. the same thing happens with my desktop computer, but with ubuntu desktop 10.10 and linux mint... but with the desktop, its probably just a case of finding drivers for my specific wireless adapter, in which case can anyone tell me where i can find the driver for a belkin F6D4050ea for linux?
View 1 Replies
View Related
May 21, 2010
Possible Duplicate:
Can I use my laptop as a second monitor for my desk computer?
My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux.
View 3 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Sep 22, 2010
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
View 2 Replies
View Related
Apr 7, 2011
I am using DELL Latitude E5510 laptop with docking station. The problem I am facing is I am not able to switch screen b/w monitor and laptop screen, I tried with fn+F8 key. Actually I have installed open SuSE11.3(Linux) operating system.
View 1 Replies
View Related
Feb 6, 2011
I'm newbie linux user and I want to ask a question about my laptop display is too big i think its because of my screen resolution, how can I change my monitor resolution?
View 1 Replies
View Related
May 10, 2011
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies
View Related
Jun 11, 2010
I've got a laptop running Backtrack4 and an external tv/monitor. Is there a program/command/configuration file that I can use to allow my laptop and monitor to connect with one another via HDMI?
View 1 Replies
View Related
Aug 25, 2010
I have an HP EliteBook 8540p laptop with associated docking station. It is running Ubuntu 10.04. Until now I have been successfully running TwinView with the nvidia-195.36.24 drivers - using the built-in LCD screen and an external LCD monitor, connected via an analog VGA cable.I've changed the screen over to a larger resolution Philips LCD, and it works fine over VGA.
However the image is not as sharp as I'm used to with other monitors, so I'm trying to get it working over the DVI port on the laptop docking station.However I have been quite unsuccessful in getting a picture to appear on the external monitor - Xorg is able to read the EDID information from the monitor, and according to Xorg.0.log has absolutely no problems with finding a valid mode and choosing this monitor as "DFP-1", alongside "DFP-0" (laptop display). But no matter what I do I can't get a picture. Xorg.0.log has no errors.
I have unsuccessfully tried: various combinations of xorg.conf options to set "ConnectedMonitor", "CustomEDID" with a EDID .bin downloaded over VGA, etc.a colleague has the exact same laptop and monitor, and has it running fine. However using his xorg.conf still produces no picture.nvidia-settings - tried lots of things a different DVI-connected monitorIt's as if the DVI port is fully functional in every way but its output is somehow disabled. I've also tried other monitors, they don't work either, yet do with a VGA cable.
EDIT: I have checked the DVI cable anything else in terms of enabling a DVI port.
View 1 Replies
View Related
Jan 24, 2011
I have an Acer Aspire 5742Z with an Intel HD Graphics card and if I connect an external monitor I have no troubles using RHELS 5, but nothing on my main laptop monitor.
View 2 Replies
View Related
Sep 13, 2010
i know this sounds stupid but on my xubuntu i cant connect my laptop to a monitor it connects on bootup so i can see the startup but i cant change after. ive tried a lot of things and i googled it and searched but no answer i have xubuntu 8.04
View 5 Replies
View Related
Jan 26, 2011
I have had an external monitor connected to my Sony Vaio VGN-TZ398U and working properly for months. This morning I connected it and the fonts throughout my desktop distorted (see attached screeshot). I am running 11.04 desktop 64-bit
Below is my output from lspci.
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
View 1 Replies
View Related
Nov 27, 2010
I'm using a netbook, and I thought I'd connect a monitor I had in the closet and see how things went. I can get a decent multi-desktop setup working, but it comes with an unusual side effect. I don't know if it's of any significance, but these weird shadows appear on all windows, menus and panels. I deativated any Compiz effects I thought might be arcing up, but that didn't seem to do anything.
For what it's worth, I tried this monitor in KDE and it seems to work fine. Netbook Edition promptly soiled itself and went into deep shock with the monitor plugged in, however -- both screens flickering, Docky spasming out of control. But I digress! The netbook is a HP Mini 210 and I believe this monitor is a Mitsubishi Diamond View DV173.
View 1 Replies
View Related
Dec 31, 2010
Just installed Ubuntu 10.04 LTS netbook edition and everything goes well except for one thing.
When I connect my lcd monitor to the vga port the system lags. If I listen to music and browse web pages at the same time, the sound skip and when the page stop loading, music is ok. Also, the mouse skip. If I do circle with it on the desktop without doing anything else, it will skip.
The strange thing if I remove the external monitor and reboot the system everything comes back to normal.
I had Intrepid Ibex for 2 years without any problems. I remember a post saying that powernowd should be disable, but can't find the process from the startup list anymore.
View 3 Replies
View Related
May 5, 2010
just upgraded my laptop to 10.04, but I can't get the laptop's internal wireless to connect to my netgear router.the laptop doesn't even show all of the neighbor's routers.
View 2 Replies
View Related
Jul 10, 2010
im tryin to connect my computer to my tv.. im using S-Video Cables.. I have an Hp DV6000 pavilion and it has those S-video pins output on the side, so i bought s-video to AV cord.. although, it won't connect. I even tried fiddling with the system>preferences>monitor option and still nothing...
View 1 Replies
View Related
Sep 4, 2010
After many hours of searching forums, help files, turning on/off firewalls, etc, I need someone far smarter than myself to help me connect to the above machine. I also looked into Samba and do not understand how to use it. It is installed on my Linux laptop, but I have no idea how to access it. I'm hoping that connecting to my Windows laptop is a fairly simple process.
View 9 Replies
View Related
Sep 18, 2010
Running Lenovo T410 and wireless won't connect at all, wired works fine but wireless can't even see any neighbored network, after lshw -c network I get this result:
*-network DISABLED
description: Wireless interface
product: WiFi Link 6000 Series
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 35
serial: 00:24:d7:0a:a6:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn
resources: irq:35 memory:f2000000-f2001fff
The funny thing is I have check marked as enable networking and wireless and I have installed hardware and activated as well.
View 2 Replies
View Related
Feb 1, 2011
I can see the connections in the above network, but if i click on that, it does not connect, but keeps on trying? My system configration of wireless is as follows,
Code:
abhilash@abhilash-G62:~/Documents$ sudo lshw -C network
*-network
description: Wireless interface
[code]...
But my laptop connects to Wired auto eth0 and usb internet(Tata photon+).
View 6 Replies
View Related
Feb 4, 2011
I installed Ubuntu on MSI laptop. Works great. I am trying to connect the laptop to external screen through the VGA output. When the laptop's lid is open - it works just fine When the laptop's lid is closed - the VGA output content is gone. i didn't find tin the monitors' menu nor in the power menu, an entry where I can ask or set the VGA output to be active all the time.
View 9 Replies
View Related
Jan 2, 2010
I have tried to connect my GMA500 based Acer 751 to an external dsiplay via VGA connection. I couldn't get the right resolution on the external screen (1920/1080) so I disconnected it and rebooted. Now there is only an "unknown" screen in the display menu. I have rewritten the xorg conf file per instructions for enabling GMA500 but to no avail - conf file looks right but screen is "unknown", low resolution and 4:3 aspect ratio, instead of 16:9. How to restore to laptop monitor - I think I can take from there to enable the right resolution.
View 4 Replies
View Related
May 27, 2010
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies
View Related
Oct 6, 2010
I would share my long awaited success with connecting my ubuntu laptop up to my universities (University of Western Sydney) wireless network. The rumors appeared true and they have finally implemented 802.11x authentication instead of that horrible java app netdirect. I am sure you've been cursing at its erratic stability. There is no linux documentation for airUWS-Lite nor anything more imformative than there windows/mac point and click steps found at [URL]. However with a few simple clicks you can have stable working connection.
When connecting make sure you have theses settings.
Security: WPA & WPA2 Enterprise
Authentication: Protected EAP (PEAP)
#This is the settings that does not present itself correctly
Anonymous Identity: leave blank
PEAP Version: Automatic
Inner Authentication: MSCHAPv2
Username: <YOUR 8 DIGIT STUDENT NUMBER>
Password: your regular password
View 1 Replies
View Related
Mar 26, 2010
I have a laptop with win7 and I would like to connect to the internet through my desktop pc's connection. I have Karmic on the desktop and use a cable modem and I'm thinking about buying a router to solve this problem but I wouldn't know how to set it up in Ubuntu nor which router would be the best or easiest to set up. I saw this site [URL] and I'm torn between the TP-Link TL-WR741ND Wireless Lite N Router and the D-Link Wireless N Router DIR-615, because these are the cheapest ones and I can't afford much more than that.
View 6 Replies
View Related
Jun 3, 2010
im having problems connecting mybook 2 with my laptop. Everything was ok and running perfectly and there was no changes in my laptop or upgrades and it stop working. I was not able to see the computers in my network then I fixed it I can see them but when I try to browse the files the OS tells me that is unable to mount location and failed to retrieve share list from server. The funny part is that if I go to Places>Connect to server and type my mybook ip address, my laptop can connect and I can browse the files. I really dont know what is the problem. My firewall is down so I dont think that is the problem. If anyone can help me with these because I know im able to connect to my mybook but i am unable to connect to any other laptop or my WD-Tv live.
View 1 Replies
View Related
Jan 11, 2011
I have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
View 1 Replies
View Related
Jan 18, 2011
I am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies
View Related
