I have had an external monitor connected to my Sony Vaio VGN-TZ398U and working properly for months. This morning I connected it and the fonts throughout my desktop distorted (see attached screeshot). I am running 11.04 desktop 64-bit
I have this weird problem; When I change the monitor preferences in the 'System > Preferences > Monitors' dialog, the colors and fonts of much of the text on the screen get messed up. The issue is best seen in the attached figure. All applications seems to run as normal, and there is no other trouble than the visual.
It happens in the moment i hit apply. It happens every single time. The desired changes is applied as they should. To turn my PC back to normal I have to restart it, and then it will start again with the new settings without any problems at all.
The problem occurred for the first time yesterday. I think it may have to do with some updates (advised updates through Update Manager) I have done lately (I tend to mindlessly install most updates). Other than that I have no idea what is causing the problem.
Have anybody experienced a similar problem? Does anybody have a clue of what is causing it, and what I can do to solve the problem? PS: I am running Ubuntu 10.10 32bit on a 5 year old Dell Inspiron 630m.
i know this sounds stupid but on my xubuntu i cant connect my laptop to a monitor it connects on bootup so i can see the startup but i cant change after. ive tried a lot of things and i googled it and searched but no answer i have xubuntu 8.04
Is there any way, how to make connecting monitor to my laptop as easy as it is e.g. in Windows? Just plug-n-play? I've just installed last version of Ubuntu and then connect monitor. After connecting monitor nothing happened (my laptop LCD doesn't get blinked and it doesn't try to use the monitor as a second one). So I went to Monitors configuration, where I saw "Mirror screens". I've unchecked "Same image in all monitors" and applied, also nothing happened. The monitor is still just black. Is there any application which would make this stuff easier for me? I have HP ProBook 5320m with some Intel HD graphic card inside and 21.5" LG W2240T-PN monitor.
I'm using kubuntu 11.04 sometimes when I watch ..... or other videos, the screen distorts (kinda like a detuned tv) and the machine freezes. the only way to get out is to do a hard reset. I *think* its my video drivers.How can I get the most up to date drivers?below is my video card details:Quote:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)or maybe its my Flash plug-in (i'm using the adobe plug in and FF)
I'm using a netbook, and I thought I'd connect a monitor I had in the closet and see how things went. I can get a decent multi-desktop setup working, but it comes with an unusual side effect. I don't know if it's of any significance, but these weird shadows appear on all windows, menus and panels. I deativated any Compiz effects I thought might be arcing up, but that didn't seem to do anything.
For what it's worth, I tried this monitor in KDE and it seems to work fine. Netbook Edition promptly soiled itself and went into deep shock with the monitor plugged in, however -- both screens flickering, Docky spasming out of control. But I digress! The netbook is a HP Mini 210 and I believe this monitor is a Mitsubishi Diamond View DV173.
Just installed Ubuntu 10.04 LTS netbook edition and everything goes well except for one thing.
When I connect my lcd monitor to the vga port the system lags. If I listen to music and browse web pages at the same time, the sound skip and when the page stop loading, music is ok. Also, the mouse skip. If I do circle with it on the desktop without doing anything else, it will skip.
The strange thing if I remove the external monitor and reboot the system everything comes back to normal.
I had Intrepid Ibex for 2 years without any problems. I remember a post saying that powernowd should be disable, but can't find the process from the startup list anymore.
I boot into gnome just fine, but as soon as I switch to console 1 or 2 or N (insert number here) it distorts my video across all of them. It seems like it's changing the refresh rate either horizontal or vertical and I just don't know how to solve the problem. If it distorts I can't get it back to decent readable graphics without a reboot. Was doing the same thing in ubuntu, and that's part of the reason I installed suse. I am running 1600X1200 with 50 refresh rate in gnome and have swapped the console resolution around, trying different options but still have the same problem.
My laptop is a Dell Inspiron 510m with onboard Intel 855 sound (STAC 9750 AC97). The sound was perfect with WinXP, but with Ubuntu it's tinny and lacks richness and vibrates and distorts at higher volumes. I've played around with Alsamixer and changed the driver from ALSA to OSS4 and it has improved slightly, but still not perfect. Is it just not gonna get any better, should I not be expecting it to be as good as WinXP?
I've seen on the Intel site a Linux driver for my controller, it's a tarball but it won't compile after extracting it (read on this forum that someone had the exact same problem with that driver). Will the Intel driver not help, does the problem go deeper than just the driver? It would be perfect it you could just wrap the Dell/Intel driver and use that (just like with wireless ndiswrapper).
I have a laptop and an external monitor connected via displayport. I can configure both displays via settings with correct resolution and arrangement. However, this configuration is not sticking, and every time I shut down the laptop or close the lid I will need to fight with black screens and more to bring the same configuration again. Basically, it seems that the monitor is "stealing" the primary role to the laptop's native screen (I have it configured as secondary, but also being primary the configuration gets messed).
After many trial & errors, this is the routine I have found to make things work every time I boot / awake the system:
1. Boot. Laptop's display shows the booting sequence. 2. When the login screen should appear, laptop's display goes black, monitor shows background. 3. If I press F9 to increase brightness, the brightness icon appears in the monitor, but it is stuck at the minimum. 4. The only way to leave this point is by pressing F7 (project screen) and then F9 again to increase brightness. Then the laptop's screen does light up.
This is when I'm lucky. Sometimes the configuration goes mad and I get mirrored displays and different resolutions, without touching the settings myself. Also, if I unplug the displayport I run the risk of getting stuck with a black screen in the laptop, without any way of recovering the GUI other than rebooting (Ctrl Alt F2 will still show the command line screen).
My system is Debian 8 testing up to date, running in a Lenovo T430 with Intel components. I'm not sure the monitor is relevant here, but in any case it is an Eizo CS240.
I would like to use the Adobe Garamond Pro in my text doccument in open office writer. I got a text document where from a friend where it is used so I know that it can. But when I want to edit I cant find it in the fonts dropdown menu.
I have a folder with over 1500 fonts, I would like to move them to my /usr/share/fonts folder so that they can be used. Some are from Windows, some are just random extras. I've installed the msttcorefonts, but there are quite a few missing that make some wen pages look different.
How can I go about putting the fonts from my folder, into the appropriate /usr/share/fonts folder to be used? And how can I move them all? I can't drag and drop them, and mv FONT_NAME /usr/share/fonts for all of them will take a month or two. Is there a way to elevate my self to be able to just drag and drop them all? And which folder would they need to go into for them to be used in Chrome and Firefox?
I have an external audio interface that is supported by alsa and works really well with ubuntu 10.04. The only problem is that on my studio monitors I can clearly hear that the sound from ubuntu is distorted, like there is too much gain somwhere. Since my audio interface (Lexicon Omega) has an output level knob on the interface, ALSA does not have a level slider (software) through any mixer (eg GNOME ALSA mixer).
In order to stop the distorting sound problem, ie the signal input to my external audio interface is too "hot" first install PulseAudio Volume Control (referred to as pavucontrol in repos) in PulseAudio Volume Control configuration tab, set "profile" of your external sound interface to "off" log out, and when you log in again your problem should be solved.
I have just installed openSUSE 11.2 X86_64 on my laptop, I then used KDE to install lots of type 1 fonts for my printer. These get loaded to /usr/local/share/fonts/...These installed fonts are visible to KDE (KWRITE) and GIMP so I assume that the installation was O.K. When I start openOFFICE writer I do not see these fonts. The font selection appears to be the fonts located under /usr/share/fonts. I have not tried other ooo3 components. I assume that they are not going to see the fonts either.
I have searched google and it appears that /usr/local/share/fonts is the correct location for non-packaged fonts. Has anybody any idea what is wrong? I think I could move all the fonts to /usr/share/fonts and ooo3 would work but this seems to break the installation directory structure. I have considered symlinks but I don't like the idea of defining a font twice to Linux and creating the syslinks is more work than reinstalling the fonts if they are lost
1. What do I need to set all the fonts to in 11.04 to make them look more like W7 fonts?2. Is there a way I can improve the graphics in WINE? Some very simple games run slow. Is there a way I can change the cursors in wine.
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:
If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again. When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
