I installed Ubuntu on MSI laptop. Works great. I am trying to connect the laptop to external screen through the VGA output. When the laptop's lid is open - it works just fine When the laptop's lid is closed - the VGA output content is gone. i didn't find tin the monitors' menu nor in the power menu, an entry where I can ask or set the VGA output to be active all the time.
View 9 Replies
I have tried to connect my GMA500 based Acer 751 to an external dsiplay via VGA connection. I couldn't get the right resolution on the external screen (1920/1080) so I disconnected it and rebooted. Now there is only an "unknown" screen in the display menu. I have rewritten the xorg conf file per instructions for enabling GMA500 but to no avail - conf file looks right but screen is "unknown", low resolution and 4:3 aspect ratio, instead of 16:9. How to restore to laptop monitor - I think I can take from there to enable the right resolution.
View 4 Replies View Relatedim having problems connecting mybook 2 with my laptop. Everything was ok and running perfectly and there was no changes in my laptop or upgrades and it stop working. I was not able to see the computers in my network then I fixed it I can see them but when I try to browse the files the OS tells me that is unable to mount location and failed to retrieve share list from server. The funny part is that if I go to Places>Connect to server and type my mybook ip address, my laptop can connect and I can browse the files. I really dont know what is the problem. My firewall is down so I dont think that is the problem. If anyone can help me with these because I know im able to connect to my mybook but i am unable to connect to any other laptop or my WD-Tv live.
View 1 Replies View RelatedI have a laptop and an external monitor connected via displayport. I can configure both displays via settings with correct resolution and arrangement. However, this configuration is not sticking, and every time I shut down the laptop or close the lid I will need to fight with black screens and more to bring the same configuration again. Basically, it seems that the monitor is "stealing" the primary role to the laptop's native screen (I have it configured as secondary, but also being primary the configuration gets messed).
After many trial & errors, this is the routine I have found to make things work every time I boot / awake the system:
1. Boot. Laptop's display shows the booting sequence.
2. When the login screen should appear, laptop's display goes black, monitor shows background.
3. If I press F9 to increase brightness, the brightness icon appears in the monitor, but it is stuck at the minimum.
4. The only way to leave this point is by pressing F7 (project screen) and then F9 again to increase brightness. Then the laptop's screen does light up.
This is when I'm lucky. Sometimes the configuration goes mad and I get mirrored displays and different resolutions, without touching the settings myself. Also, if I unplug the displayport I run the risk of getting stuck with a black screen in the laptop, without any way of recovering the GUI other than rebooting (Ctrl Alt F2 will still show the command line screen).
My system is Debian 8 testing up to date, running in a Lenovo T430 with Intel components. I'm not sure the monitor is relevant here, but in any case it is an Eizo CS240.
I have a laptop that has been connected to an external screen ever since i installed linux on it but i now wish to use it as a proper laptop but i when i run it without the external screen, the laptop screen goes blank after the initial boot splash screen. Is there a way to fix this?
View 7 Replies View RelatedThe laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
View 2 Replies View RelatedI'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
View 1 Replies View RelatedI am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
Code: Select allsudo echo 950 > /sys/class/backlight/intel_backlight/brightness
and the laptop screen turns back on.
I'm wondering: Is there a way to streamline this so that it happens on boot, but after GNOME loads?Or: Is there a better method to solve this?
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies View RelatedI have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
I have a netbook (Acer Aspire One) I'm running Slackware 13. and usually, I prefer to connect an external monitor. When I switch my machine on with the monitor connected, the display is duplicated on both screens and since I just want the netbook's screen to be off and only see the display on the external monitor, I can doxrandr --output LVDS --off
Great! However, it's a hassle to do this every time I log in and I'd like to automate the process if possible. I did some googling and I found that if you want to automate xrandr commands, you can put a script in /etc/X11/Xsession.d/ (see this). I wrote the following script to automate my xrandr commands and since the Xsession.d directory didn't exist, I tried creating it. The script was called 45custom-xrandr_settings, as the one on the RandR wiki is called the same.
Code:
#!/bin/bash
# Check whether the external monitor is connected
[code]...
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
I am a recent convert to Ubuntu 9.10. I have installed it on my by travel laptop, which is docked when at home with a 22' ViewSonic screen.
Under Windows all is good, I just plug it in and whamo, I can close the laptop lid and use the Viewsonic as my primary screen.
Under Ubuntu, it appears the above is impossible. I seek your guidance as below.
Q. Is it possible dock my 22" screen as my primary screen with my laptop?
Q If it is possible, how do I do it?
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
View 4 Replies View Relatedi know this sounds stupid but on my xubuntu i cant connect my laptop to a monitor it connects on bootup so i can see the startup but i cant change after. ive tried a lot of things and i googled it and searched but no answer i have xubuntu 8.04
View 5 Replies View RelatedUsing a fresh Ubuntu server install, i setup UFW :
[Code]..
When connecting from external box to this server on port 25, the connection is properly blocked by UFW but i can't find any UFW log (/var/log/kern.log, /var/log/messages, /var/log/ufw.log ...). I'm using default rsyslog.
I have a few computers all connected to the same router both wireless and wired. All at the moment are running Ubuntu. There is no problem sharing any of these computer's local drives through the network. However I have one desktop with an external USB Hard disc plugged into it. I would like to share this external hard disc on the network. I set it up to share but when I try and access it from one of the other computers on the network, although it shows up, I get the message "Unable to mount location. Failed to mount windows share".
View 1 Replies View RelatedI'm using a netbook, and I thought I'd connect a monitor I had in the closet and see how things went. I can get a decent multi-desktop setup working, but it comes with an unusual side effect. I don't know if it's of any significance, but these weird shadows appear on all windows, menus and panels. I deativated any Compiz effects I thought might be arcing up, but that didn't seem to do anything.
For what it's worth, I tried this monitor in KDE and it seems to work fine. Netbook Edition promptly soiled itself and went into deep shock with the monitor plugged in, however -- both screens flickering, Docky spasming out of control. But I digress! The netbook is a HP Mini 210 and I believe this monitor is a Mitsubishi Diamond View DV173.
Just installed Ubuntu 10.04 LTS netbook edition and everything goes well except for one thing.
When I connect my lcd monitor to the vga port the system lags. If I listen to music and browse web pages at the same time, the sound skip and when the page stop loading, music is ok. Also, the mouse skip. If I do circle with it on the desktop without doing anything else, it will skip.
The strange thing if I remove the external monitor and reboot the system everything comes back to normal.
I had Intrepid Ibex for 2 years without any problems. I remember a post saying that powernowd should be disable, but can't find the process from the startup list anymore.
I am running the latest Ubuntu on a partition with windows 7 as my main OS. I got my wireless drivers installed and it seems to pick up on all the wireless networks, whenever i try to connect to mine it tires and then fails and asks for the password again, even though its definatly the right password for my wireless.
I am also having trouble connecting to my external hard drive, i am completely new with Linux and would appreshiate -retard proof- tutorials if you need me to run anything, and such. Its fully updated and drivers are up to date (apparently) so i cant understand what is wrong.
directory and how to mount and all necessary commands.
View 1 Replies View RelatedIs there any way, how to make connecting monitor to my laptop as easy as it is e.g. in Windows? Just plug-n-play? I've just installed last version of Ubuntu and then connect monitor. After connecting monitor nothing happened (my laptop LCD doesn't get blinked and it doesn't try to use the monitor as a second one). So I went to Monitors configuration, where I saw "Mirror screens". I've unchecked "Same image in all monitors" and applied, also nothing happened. The monitor is still just black. Is there any application which would make this stuff easier for me? I have HP ProBook 5320m with some Intel HD graphic card inside and 21.5" LG W2240T-PN monitor.
View 3 Replies View Relatedjust upgraded my laptop to 10.04, but I can't get the laptop's internal wireless to connect to my netgear router.the laptop doesn't even show all of the neighbor's routers.
View 2 Replies View Relatedim tryin to connect my computer to my tv.. im using S-Video Cables.. I have an Hp DV6000 pavilion and it has those S-video pins output on the side, so i bought s-video to AV cord.. although, it won't connect. I even tried fiddling with the system>preferences>monitor option and still nothing...
View 1 Replies View RelatedAfter many hours of searching forums, help files, turning on/off firewalls, etc, I need someone far smarter than myself to help me connect to the above machine. I also looked into Samba and do not understand how to use it. It is installed on my Linux laptop, but I have no idea how to access it. I'm hoping that connecting to my Windows laptop is a fairly simple process.
View 9 Replies View RelatedRunning Lenovo T410 and wireless won't connect at all, wired works fine but wireless can't even see any neighbored network, after lshw -c network I get this result:
*-network DISABLED
description: Wireless interface
product: WiFi Link 6000 Series
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 35
serial: 00:24:d7:0a:a6:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn
resources: irq:35 memory:f2000000-f2001fff
The funny thing is I have check marked as enable networking and wireless and I have installed hardware and activated as well.
I can see the connections in the above network, but if i click on that, it does not connect, but keeps on trying? My system configration of wireless is as follows,
Code:
abhilash@abhilash-G62:~/Documents$ sudo lshw -C network
*-network
description: Wireless interface
[code]...
But my laptop connects to Wired auto eth0 and usb internet(Tata photon+).
When I change the "When laptop lid is closed" option in Gnome Power Manager to either "Blank Screen" or "Do Nothing" (by manually using gconf-editor), the screen itself doesn't turn off when the lid is closed. Obviously not a huge deal, as I could just change the "idle before sleep" on certain occasions, but I liked that setting it to "Do Nothing" previously would actually turn off the screen when the lid was closed.
View 1 Replies View RelatedRunning 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies View Related
