Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 RepliesI've been using Ubuntu for a few years now and in general am very pleased with it; it's Achilles Heel is however WiFi.My daughter has an older HP laptop with built in Broadcom wifi, Lucid did not recognise this, neither did it recognise a Netgear PCI card or a Netgear USB adapter.Network manager showes wifi greyed out.lspci -vnn shows BCM4303 802.11b [14E4:4301] (rev 02)lshw shows *-network:1 UNCLAIMED and shows product as BCM4303 802.11b wireless LAN controller.Wifi is the most popular connection method for the average user, until it is made simpler to resolve problems a lot of potential Linux users
View 3 Replies View Relatedive installed ubuntu for netbook on my laptop, everything went fine, it installed ok, and it was all good, until i tried clicking on the icon im supposed to click on to get conncected to wifi. where it's supposed to have various wireless networks it says "device not ready (firmware missing)" and ive tried everything i can think of to get it working, but it wont work. the same thing happens with my desktop computer, but with ubuntu desktop 10.10 and linux mint... but with the desktop, its probably just a case of finding drivers for my specific wireless adapter, in which case can anyone tell me where i can find the driver for a belkin F6D4050ea for linux?
View 1 Replies View RelatedI have been trying to get aircrack-ng program to get to work but apparently i needed a negative-one-channel-maxim patch in order for it to work successfully. I have looked over wiki of aircrack and followed the guide a few times but every time my compiled module was rejected my modprobe.
View 1 Replies View RelatedI've happened across a wireless router that has a gateway address of 192.168.0.1 and allots IPs from 192.168.0.64-255. My laptop wouldn't connect to it automatically, so I was playing around and found that it needed 0.x instead of 1.x. I thought the network manager on ubuntu would have figured that out?! Now its a separate story that the router happens to have no admin password
View 4 Replies View RelatedI just installed ubuntu 9.10 in my freinds laptop and it has a realtek 81878 wireless card...it detects the wireless networks but when i connect it just keeps on asking for the authentication key again and again.
View 8 Replies View RelatedI updated successfully to 10.04 via wireless, then I downloadsynthesizer via wireless. The next day, today that is, can't get wireless to work. It keeps prompting mor the passphrase, I enter everything correctly, all the other computers in the house have no problem.
View 9 Replies View RelatedI am working with ubuntu (gnome) 10.10 maverick 64 bit on a HP pavilion 2713ca. I have installed the Broadcom sta driver for a BCM4328 wifi driver. After setting wpa security with my password, the wifi network worked for many weeks. However, in the last few days it does not connect no more. I have tried to reinstall SSID. And I have checked to see if eth1 was still there:
root@max-HP-Pavilion-dv2700-Notebook-PC:/home/max# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11abgn ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:14 Mb/s Tx-Powerff
Retry min limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I'm using a HP mini netbook, and I recently installed Ubuntu on it. I updated and did the whole proprietary drivers activation and it now scans and sees networks but I am having trouble actually using them now. It says that it is connected to a wireless network but it never loads any pages.
View 7 Replies View Relatedim using minimal ubuntu 10.04 and im having trouble connecting to wifi using the terminal. the wifi worked perfectly on the desktop version. i followed this guide [URL] and looks like then i used '/etc/init.d/networking restart' and get this now it seems ive disabled wlan0 as $ sudo lshw -C shows
i tried to enable it again by using 'sudo ifup wlan0' but i get a few errors i think the 2nd errors may be because i tried to download another driver for the wireless using 'wget [URL] and then 'dpkg -i rt3090-dkms_2.3.1.3-0ubuntu0~ppa1_all.deb'
I am a newbie trying to setup wifi using 9.10 on a compaq nx9010 . The driver is activated for the broadcom 4320 rev 2 chipset. the wifi light is on.I can connect to my neighbors's unsecured network, but not mine which is using personal WPA2 security.
I am using a lynksys Wireless-N Broadband Router WRT160Nv2 I have installed WICD and removed the gnome network manager WICD tries to validate authentication which fails. then it tries to obtain an ip address which fails. finally it says: CONNECTION FAILED: UNABLE TO GET IP ADDRESS". meanwhile it is showing the wireless network at 100% signal.
last nite tried changing wifi channel, changing to WEP, installed and tried WPASUPPLICANT and WPA_GUI. Unfortunately , nothing worked. The wifi controller was able to assosciate with the network but could not authenticate. I'm wondering if the passphrase that I type in on the computer is somehow being turned into a hexidecimal or something so that it does not match what the router has as the pass phrase.
I am connecting from my WinXP laptop to my Ubuntu Server desktop using PUTTY. The laptop is using Wifi and the desktop is on a wire. I have a D-Link DI-524 wireless router. My session works fine for a while, and then freezes, sometimes after only a few seconds, and sometimes after many minutes. The same thing happens when I use VMWare Server Console to connect from the laptop to the desktop's virtual machines. Other connections between these machines under this setup (RDP, samba, SVN) do not experience problems. I usually do not experience problems establishing the SSH and VMWare connections.I have ended up using Windows Remote Desktop to connect to a Windows XP virtual machine on the desktop, and opening a PUTTY session on that machine. That's a nice workaround, but it makes it so that I have to have that VM running in order to have a reliable SSH session to the box
View 5 Replies View RelatedI've noticed that switching to Ubuntu about 6 months ago has made it noticeably more difficult to use the free wifi at my school. When I had Windows 7 on the same laptop, it was much easier to establish and maintain a connection. I know it's not the hardware. My question is: is there some security setting that makes it difficult to use public wifi on Ubuntu? Also, I don't have this problem at home on my WPA2 home wifi network.
View 1 Replies View RelatedJust installed ubuntu 11.04 and it all works fine. However, I got a big problem. When I unplug my ethernet cable and turn on my wifi my pc freezes?
All updates are done and there are no drivers. I'm using die eeepc 1001px.
A netbook isn't usefull without a wifi connection
I'm a novice using Ubuntu 10.1 on an Asus EeePC. For several days, my computer has refused to connect to the office wifi, though it's had no trouble doing this in the past. It recognizes the signal, and the wifi icon keeps indicating that it's in the process of connecting, but the process never completes. Every few minutes I'll be asked to re-enter the password. Eventually it gives up.
I'm not sure if this problem extends to other wifi networks or just the one at my office.
I am using Ubuntu 11.04 desktop. I a, using my internet through wifi and it was working fine but suddenly it start strange activities... like when I restart ubuntu it work for few clicks but then suddenly stopp even wifi is showing connected but I cant use internet.
View 5 Replies View RelatedAfter many hours of searching forums, help files, turning on/off firewalls, etc, I need someone far smarter than myself to help me connect to the above machine. I also looked into Samba and do not understand how to use it. It is installed on my Linux laptop, but I have no idea how to access it. I'm hoping that connecting to my Windows laptop is a fairly simple process.
View 9 Replies View RelatedRunning Lenovo T410 and wireless won't connect at all, wired works fine but wireless can't even see any neighbored network, after lshw -c network I get this result:
*-network DISABLED
description: Wireless interface
product: WiFi Link 6000 Series
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 35
serial: 00:24:d7:0a:a6:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn
resources: irq:35 memory:f2000000-f2001fff
The funny thing is I have check marked as enable networking and wireless and I have installed hardware and activated as well.
I often connects my laptop (Asus EEE) to my HTC desire hd with the wifi hotspot. But this doesn't work since yesterday when I upgraded to 11.04. When I connect the laptop to the phone the screen on the laptop goes black with a lot of scrolling text then it freezes.
This worked out of the box without any problems with 10.10.
I would share my long awaited success with connecting my ubuntu laptop up to my universities (University of Western Sydney) wireless network. The rumors appeared true and they have finally implemented 802.11x authentication instead of that horrible java app netdirect. I am sure you've been cursing at its erratic stability. There is no linux documentation for airUWS-Lite nor anything more imformative than there windows/mac point and click steps found at [URL]. However with a few simple clicks you can have stable working connection.
When connecting make sure you have theses settings.
Security: WPA & WPA2 Enterprise
Authentication: Protected EAP (PEAP)
#This is the settings that does not present itself correctly
Anonymous Identity: leave blank
PEAP Version: Automatic
Inner Authentication: MSCHAPv2
Username: <YOUR 8 DIGIT STUDENT NUMBER>
Password: your regular password
moved to Fedora 11 but can't figure out how to get my wireless working. I have the broadcom driver installed and the Network Manager Applet shows the available wireless networks, but when I click on them they just don't connect.I get the following output on lspci regarding the wireless adapter:03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
View 14 Replies View RelatedI have a laptop with win7 and I would like to connect to the internet through my desktop pc's connection. I have Karmic on the desktop and use a cable modem and I'm thinking about buying a router to solve this problem but I wouldn't know how to set it up in Ubuntu nor which router would be the best or easiest to set up. I saw this site [URL] and I'm torn between the TP-Link TL-WR741ND Wireless Lite N Router and the D-Link Wireless N Router DIR-615, because these are the cheapest ones and I can't afford much more than that.
View 6 Replies View Relatedim having problems connecting mybook 2 with my laptop. Everything was ok and running perfectly and there was no changes in my laptop or upgrades and it stop working. I was not able to see the computers in my network then I fixed it I can see them but when I try to browse the files the OS tells me that is unable to mount location and failed to retrieve share list from server. The funny part is that if I go to Places>Connect to server and type my mybook ip address, my laptop can connect and I can browse the files. I really dont know what is the problem. My firewall is down so I dont think that is the problem. If anyone can help me with these because I know im able to connect to my mybook but i am unable to connect to any other laptop or my WD-Tv live.
View 1 Replies View RelatedI am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies View RelatedI have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
View 1 Replies View RelatedI occasionally stay at hotels where I get free wired internet but not wifi, I'd like to use my laptop as an access point so that I can have internet on my Ipod Touch. I know it's possible because after trying unsuccessfully in Ubuntu 9.04 a few times I decided to try it with windows vista and it took me a matter of seconds and both the laptop and ipod touch were surfing the internet. I'd prefer not to boot into windows just for this.
In ubuntu when I create a new wireless network, network manager shows that I'm connected to both the autoeth0 and the wireless network I created but neither computer has internet access.
I have a linksys networkrouter WiFi a laptop Windows Vista an a Laptop Ubuntu.On the vista machine i have 54mb/s on the ubuntu i have sometimes 1 and sometimes 25 mb/s When it was a Windows machine it was also 54mb/s.So y question what can i doo to speed it up ?
Some test results:
Windows:
Download 1368.2 kbyte/sec
Upload 86 kbyte/sec
Connection 631 conn/min[code]...
I have a Thomson TG782T, I live with 2 people, I don't want one of them using my internet as i never see any money for it, I don't want to change the WPA, Is there anyway i can just block the one laptop?
View 9 Replies View RelatedI have a laptop with Ubuntu 9.10. And I want to connect it to Internet using wifi. Also I have desktop with Ubuntu 9.10 (another desktop with Win XP, but for some day it will run under Ubuntu too ). I want one of this these desktops to share wifi with laptop. I think that a wifi adapter is a way to solve this problem. I found a D-Link dwa-110. i've read on forums that someone successfully installed drivers [URL]. Is there any other ways to share wifi with laptop (only 1 laptop needs to be shared with)? Had someone connected desktop with D-Link dwa-110 and laptop (as I want)? Both desktops connected to Internet via wire.
View 5 Replies View RelatedI'm having a really strange problem with my wifi connection on my laptop. The ethernet connection works fine and so does the wifi connection - as long as I sit within one meters range from my router! As soon as I take the laptop further away the connection drops. The router is still being found by network-manager and the signal is just below 100%, but when I try to establish a connection it fails.
I'm sitting here on a fresh Ubuntu 10.04 install, and I had exactly the same problem with 9.10. That time I went through a lot of different procedures, and in some strange way the problem was solved. I haven't been that lucky this time though, I've tried reinstalling network-manager, using ndiswrapper, installing the wireless backports package, tried all kinds of drivers.. nothing works.
There shouldn't be any problem with the connection itself; I've had a perfect connection downstairs but now I can't even connect if I stand two metres from the router! Has anyone experienced anything like this and managed to fix it? My wireless card is Atheros AR2413. This is an example from daemon.log
Quote:
Apr 30 00:45:51 petter-laptop NetworkManager: <info> Activation (wlan0) starting connection 'Auto Wester'
Apr 30 00:45:51 petter-laptop NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
[Code]...