General :: Unable To Switch Screen Between Monitor And Laptop
Apr 7, 2011
I am using DELL Latitude E5510 laptop with docking station. The problem I am facing is I am not able to switch screen b/w monitor and laptop screen, I tried with fn+F8 key. Actually I have installed open SuSE11.3(Linux) operating system.
View 1 Replies
ADVERTISEMENT
Mar 1, 2011
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
View 2 Replies
View Related
Dec 23, 2010
I don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
View 3 Replies
View Related
May 28, 2010
Setup:Ubuntu 10.04 recently upgraded from 9.10Dell Precision m63004G RAMCore 2 DuoDual Monitor with laptop=screen0 monitor=screen1external mouse and keyboardIssue:In both 9.10 and 10.04 (I am just now trying to solve the issue) the setup works great, but not flawless.External mouse and keyboard work with no issue.The touchpad mouse on the laptop, however, will not switch from screen1 to screen0. It works fine on either screen and will go from screen0 to screen1, just will not return. One has to hook up an external mouse to get the cursor back onto the laptop screen0.
View 5 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
May 10, 2011
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies
View Related
Oct 30, 2010
I've been having an issue with switching two of my monitors' status. I've got a 19' Sceptre monitor, and a 24' Samsung SyncMaster P2450.I'm using an ATI Radeon HD 5770 graphics card. I'm using 2 DVI ports to connect the monitors.Currently, all of the icons and menu bars are appearing on the Sceptre monitor. The Sceptre monitor is also to the left of the Samsung monitor. I've looked all through the Catalyst Control Center preferences and can not find anything useful.
View 2 Replies
View Related
Aug 19, 2010
Mine is, ever since I installed the (wrong) opensource video driver for my Ubuntu 9.04 & Lenovo ThinkPad T41 (the one model, imho, they should never have let out the door!), uninstalled it by far-less-than-recommended means (ie, I used Synaptic and sudo apt-get remove and apt-get purge). End up is now my screen has a max resolution of 800 x 600, and Display panel insists that this laptop's screen is an "Unknown" Monitor.
Any tweaks to /etc/X11/xorg.conf (adding vertical refresh and horizontal sync rates for example) has resulted in its own weird behavior. On having my password accepted at login, there's a half-second of white that "rolls" over the screen horizontally. The next thing I see is a diagonal broken streak of white about 2 1/2" down from the top of the screen and 3 inches in from the right-hand side. The next thing I see is a buzzed,jagged rendition of my normal desktop. Nothing at all is clear, and the jags seem to redouble themselves the further one scans down on the screen. The only thing one can do in this situation, and I've done so enough times to know, is a hard reboot (power button for ten seconds or however long it takes).
And as I don't rate sh*t for a shilling on the Ubuntu forums, and as Google has been worse than useless every time I search for problems as detailled as these (it's like K-Mart: it has what you want until you go to look for it!), and as my one self-styled "Lunix-Geek" friend (now in the UK) has only briefly battled the xserver-xorg beasts, I'm coming here to see if anyone knows something else I could do besides bite the bullet, say goodby to my accumulated goodies, and reinstall Ubuntu.
View 4 Replies
View Related
Jul 3, 2010
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
View 2 Replies
View Related
May 7, 2015
Where the script is for Gnome 3. When I plug the HDMI cable, the desktop expands to include both, but disables the backlight on the laptop monitor. I have to restart gdm3 or the laptop for the brightness control to bring it back up. First, why would it turn brightness to 0, and how do I change the default of that so it stops. I plug and unplug the HDMI regualarly while I wait for a new desktop and the laptop has to pull double duty.
I just switched from Ubuntu 14.10. It never blacked out a screen on plug in or removing. That means that there must be some way to do it, however, it used Unity and this is Gnome 3.
I installed KDE. It works as well. I will use it for now, but would like to get Gnome 3 to work. My default is gdm but I think I saw I can switch it to kdm.
View 0 Replies
View Related
Mar 28, 2016
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
Code: Select allsudo echo 950 > /sys/class/backlight/intel_backlight/brightness
and the laptop screen turns back on.
I'm wondering: Is there a way to streamline this so that it happens on boot, but after GNOME loads?Or: Is there a better method to solve this?
View 1 Replies
View Related
Jul 2, 2010
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
View 1 Replies
View Related
May 13, 2010
I've been unable to connect an external monitor to my laptop running 10.04, even though the resolution and framerate are right. The monitor says something like "unsupported video settings".
In other news, I put the live cd into another computer which relies on a monitor and after the very first screen with the two logos at the bottom, the monitor decides to go to sleep. I try with another monitor and it just seems to have to feed. This is the more important problem, but I wonder if there isn't some built-in problem with 10.04.
View 2 Replies
View Related
Apr 19, 2015
I have a laptop and an external monitor connected via displayport. I can configure both displays via settings with correct resolution and arrangement. However, this configuration is not sticking, and every time I shut down the laptop or close the lid I will need to fight with black screens and more to bring the same configuration again. Basically, it seems that the monitor is "stealing" the primary role to the laptop's native screen (I have it configured as secondary, but also being primary the configuration gets messed).
After many trial & errors, this is the routine I have found to make things work every time I boot / awake the system:
1. Boot. Laptop's display shows the booting sequence.
2. When the login screen should appear, laptop's display goes black, monitor shows background.
3. If I press F9 to increase brightness, the brightness icon appears in the monitor, but it is stuck at the minimum.
4. The only way to leave this point is by pressing F7 (project screen) and then F9 again to increase brightness. Then the laptop's screen does light up.
This is when I'm lucky. Sometimes the configuration goes mad and I get mirrored displays and different resolutions, without touching the settings myself. Also, if I unplug the displayport I run the risk of getting stuck with a black screen in the laptop, without any way of recovering the GUI other than rebooting (Ctrl Alt F2 will still show the command line screen).
My system is Debian 8 testing up to date, running in a Lenovo T430 with Intel components. I'm not sure the monitor is relevant here, but in any case it is an Eizo CS240.
View 3 Replies
View Related
Feb 13, 2010
My computer is running mythbuntu 9.10 on a 24" LCD monitor using VGA. The monitor also has a DVI input where I run my Roku movie box with a HDMI to DVI cable. Is there software that I can run on my mythbuntu pc that will allow the user to pick which output would be active on the monitor? I can disconnect the Roku power to get back to my pc but I need the pc to switch over the monitor to the Roku.
View 3 Replies
View Related
Jan 16, 2010
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
View 2 Replies
View Related
Jan 2, 2010
I have a netbook (Acer Aspire One) I'm running Slackware 13. and usually, I prefer to connect an external monitor. When I switch my machine on with the monitor connected, the display is duplicated on both screens and since I just want the netbook's screen to be off and only see the display on the external monitor, I can doxrandr --output LVDS --off
Great! However, it's a hassle to do this every time I log in and I'd like to automate the process if possible. I did some googling and I found that if you want to automate xrandr commands, you can put a script in /etc/X11/Xsession.d/ (see this). I wrote the following script to automate my xrandr commands and since the Xsession.d directory didn't exist, I tried creating it. The script was called 45custom-xrandr_settings, as the one on the RandR wiki is called the same.
Code:
#!/bin/bash
# Check whether the external monitor is connected
[code]...
View 5 Replies
View Related
Dec 25, 2010
I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find.
If it matters my system is like this:
Archlinux
Linux 2.6.36
Xorg 7.6
X server 1.9.2
Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules)
When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr.
Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?
View 1 Replies
View Related
Mar 20, 2010
I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
View 1 Replies
View Related
Aug 25, 2011
I have to work inside two environment. One Windows (local) and one Linux (remote).I've installed the screen linux utility in both.I'm able to open a screen on my windows, then in one tab, I opened a ssh connection to the linux remote and I start another screen.Samplelinux -- |0 linux remote 0| 1 linux remote 1 windows-- |0 linux | 9 windows I can switch between "linux remote 0" and "linux remote 1" using Atl+.This is configured in .screenrc (bindkey "^[0" select 0)How could I switch to "9 windows"?
View 4 Replies
View Related
May 21, 2010
Possible Duplicate:
Can I use my laptop as a second monitor for my desk computer?
My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux.
View 3 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Sep 22, 2010
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
View 2 Replies
View Related
Jun 24, 2011
Is there any way, how to make connecting monitor to my laptop as easy as it is e.g. in Windows? Just plug-n-play? I've just installed last version of Ubuntu and then connect monitor. After connecting monitor nothing happened (my laptop LCD doesn't get blinked and it doesn't try to use the monitor as a second one). So I went to Monitors configuration, where I saw "Mirror screens". I've unchecked "Same image in all monitors" and applied, also nothing happened. The monitor is still just black. Is there any application which would make this stuff easier for me? I have HP ProBook 5320m with some Intel HD graphic card inside and 21.5" LG W2240T-PN monitor.
View 3 Replies
View Related
Aug 23, 2010
1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
View 9 Replies
View Related
Feb 6, 2011
I'm newbie linux user and I want to ask a question about my laptop display is too big i think its because of my screen resolution, how can I change my monitor resolution?
View 1 Replies
View Related
May 13, 2010
In our cluster of RedHat4 & 5 machines, if someone locks the computer and walks away no body can use it. Is there a feature in RedHat5, Gnome, KDE etc that would allow for the option of switching users at the lock screen, so more than one person can be logged in
View 11 Replies
View Related
May 30, 2009
I install SuSE but I can use only command on line how can I switch to KDE or Gnome. This is the first time I use linux.
View 1 Replies
View Related
Jun 11, 2010
I've got a laptop running Backtrack4 and an external tv/monitor. Is there a program/command/configuration file that I can use to allow my laptop and monitor to connect with one another via HDMI?
View 1 Replies
View Related
Aug 25, 2010
I have an HP EliteBook 8540p laptop with associated docking station. It is running Ubuntu 10.04. Until now I have been successfully running TwinView with the nvidia-195.36.24 drivers - using the built-in LCD screen and an external LCD monitor, connected via an analog VGA cable.I've changed the screen over to a larger resolution Philips LCD, and it works fine over VGA.
However the image is not as sharp as I'm used to with other monitors, so I'm trying to get it working over the DVI port on the laptop docking station.However I have been quite unsuccessful in getting a picture to appear on the external monitor - Xorg is able to read the EDID information from the monitor, and according to Xorg.0.log has absolutely no problems with finding a valid mode and choosing this monitor as "DFP-1", alongside "DFP-0" (laptop display). But no matter what I do I can't get a picture. Xorg.0.log has no errors.
I have unsuccessfully tried: various combinations of xorg.conf options to set "ConnectedMonitor", "CustomEDID" with a EDID .bin downloaded over VGA, etc.a colleague has the exact same laptop and monitor, and has it running fine. However using his xorg.conf still produces no picture.nvidia-settings - tried lots of things a different DVI-connected monitorIt's as if the DVI port is fully functional in every way but its output is somehow disabled. I've also tried other monitors, they don't work either, yet do with a VGA cable.
EDIT: I have checked the DVI cable anything else in terms of enabling a DVI port.
View 1 Replies
View Related