Ubuntu Networking :: Dir 655 Not Connecting To 10.04 On T410 Laptop
Sep 18, 2010
Running Lenovo T410 and wireless won't connect at all, wired works fine but wireless can't even see any neighbored network, after lshw -c network I get this result:
*-network DISABLED
description: Wireless interface
product: WiFi Link 6000 Series
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 35
serial: 00:24:d7:0a:a6:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn
resources: irq:35 memory:f2000000-f2001fff
The funny thing is I have check marked as enable networking and wireless and I have installed hardware and activated as well.
View 2 Replies
ADVERTISEMENT
Sep 4, 2010
After many hours of searching forums, help files, turning on/off firewalls, etc, I need someone far smarter than myself to help me connect to the above machine. I also looked into Samba and do not understand how to use it. It is installed on my Linux laptop, but I have no idea how to access it. I'm hoping that connecting to my Windows laptop is a fairly simple process.
View 9 Replies
View Related
May 27, 2010
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies
View Related
Oct 6, 2010
I would share my long awaited success with connecting my ubuntu laptop up to my universities (University of Western Sydney) wireless network. The rumors appeared true and they have finally implemented 802.11x authentication instead of that horrible java app netdirect. I am sure you've been cursing at its erratic stability. There is no linux documentation for airUWS-Lite nor anything more imformative than there windows/mac point and click steps found at [URL]. However with a few simple clicks you can have stable working connection.
When connecting make sure you have theses settings.
Security: WPA & WPA2 Enterprise
Authentication: Protected EAP (PEAP)
#This is the settings that does not present itself correctly
Anonymous Identity: leave blank
PEAP Version: Automatic
Inner Authentication: MSCHAPv2
Username: <YOUR 8 DIGIT STUDENT NUMBER>
Password: your regular password
View 1 Replies
View Related
Mar 26, 2010
I have a laptop with win7 and I would like to connect to the internet through my desktop pc's connection. I have Karmic on the desktop and use a cable modem and I'm thinking about buying a router to solve this problem but I wouldn't know how to set it up in Ubuntu nor which router would be the best or easiest to set up. I saw this site [URL] and I'm torn between the TP-Link TL-WR741ND Wireless Lite N Router and the D-Link Wireless N Router DIR-615, because these are the cheapest ones and I can't afford much more than that.
View 6 Replies
View Related
Jun 3, 2010
im having problems connecting mybook 2 with my laptop. Everything was ok and running perfectly and there was no changes in my laptop or upgrades and it stop working. I was not able to see the computers in my network then I fixed it I can see them but when I try to browse the files the OS tells me that is unable to mount location and failed to retrieve share list from server. The funny part is that if I go to Places>Connect to server and type my mybook ip address, my laptop can connect and I can browse the files. I really dont know what is the problem. My firewall is down so I dont think that is the problem. If anyone can help me with these because I know im able to connect to my mybook but i am unable to connect to any other laptop or my WD-Tv live.
View 1 Replies
View Related
Oct 21, 2010
Thinkpad t410, ubuntu 10.04.01 64 bit, can not access internet suddenly by wireless router(Netgear WGR612) today.
I can get ip address from rounter, and can ping 192.168.1.1, but can not access url, telnet 192.168.1.1 80 showed me connection refused error, the weired thing is my another windows xp laptop can access internet through the same wireless router.
View 5 Replies
View Related
Jan 18, 2011
I am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies
View Related
Jan 11, 2011
I have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
View 1 Replies
View Related
May 2, 2011
I installed natty finally on my laptop (T410 Lenovo) via an upgrade from maverick. I tested maverick thoroughly first, since I had to perform the upgrade over the network, due to issues with natty booting from DVD. The upgrade went fine to natty, the system came up and I was able to get on locally and install other packages, though I did notice from time to time a lag in network performance. I installed VNC server and started it, as well as other network related services. However, I am noticing a definite issue with the network support and I suspect the natty kernel. The configuration looks sound, ifconfig, netstat and other functions appear to display the correct information, at least what I had with maverick (which worked).
Has anyone else seen issues with natty and networking? The glass looks okay, though I am using xfce and frankly there is nothing new there to really force me to upgrade, its just that this is a new LT and if I can cold install natty right now, it will save me an upgrade later.
System configuration (lshw) is below, ipaddress removed to protect the guilty..:
description: Notebook
product: 2522AP1 ()
vendor: LENOVO
version: ThinkPad T410
serial: R8M9B2Z
width: 32 bits
capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp
[Code]...
View 4 Replies
View Related
Jun 12, 2011
I'm a newbie and try to switch from Win7 to Ubuntu 11.04 with unity desktop.
My internet connection is slower than hell, and I dont know how to fix it. I tried with disable Ipv6 but it doesnt make any difference. Not sure if its disabled proper because if i do code...
View 1 Replies
View Related
Feb 9, 2010
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies
View Related
Jun 24, 2011
Is there any way, how to make connecting monitor to my laptop as easy as it is e.g. in Windows? Just plug-n-play? I've just installed last version of Ubuntu and then connect monitor. After connecting monitor nothing happened (my laptop LCD doesn't get blinked and it doesn't try to use the monitor as a second one). So I went to Monitors configuration, where I saw "Mirror screens". I've unchecked "Same image in all monitors" and applied, also nothing happened. The monitor is still just black. Is there any application which would make this stuff easier for me? I have HP ProBook 5320m with some Intel HD graphic card inside and 21.5" LG W2240T-PN monitor.
View 3 Replies
View Related
May 5, 2010
just upgraded my laptop to 10.04, but I can't get the laptop's internal wireless to connect to my netgear router.the laptop doesn't even show all of the neighbor's routers.
View 2 Replies
View Related
Jul 10, 2010
im tryin to connect my computer to my tv.. im using S-Video Cables.. I have an Hp DV6000 pavilion and it has those S-video pins output on the side, so i bought s-video to AV cord.. although, it won't connect. I even tried fiddling with the system>preferences>monitor option and still nothing...
View 1 Replies
View Related
Feb 1, 2011
I can see the connections in the above network, but if i click on that, it does not connect, but keeps on trying? My system configration of wireless is as follows,
Code:
abhilash@abhilash-G62:~/Documents$ sudo lshw -C network
*-network
description: Wireless interface
[code]...
But my laptop connects to Wired auto eth0 and usb internet(Tata photon+).
View 6 Replies
View Related
Feb 4, 2011
I installed Ubuntu on MSI laptop. Works great. I am trying to connect the laptop to external screen through the VGA output. When the laptop's lid is open - it works just fine When the laptop's lid is closed - the VGA output content is gone. i didn't find tin the monitors' menu nor in the power menu, an entry where I can ask or set the VGA output to be active all the time.
View 9 Replies
View Related
Jan 2, 2010
I have tried to connect my GMA500 based Acer 751 to an external dsiplay via VGA connection. I couldn't get the right resolution on the external screen (1920/1080) so I disconnected it and rebooted. Now there is only an "unknown" screen in the display menu. I have rewritten the xorg conf file per instructions for enabling GMA500 but to no avail - conf file looks right but screen is "unknown", low resolution and 4:3 aspect ratio, instead of 16:9. How to restore to laptop monitor - I think I can take from there to enable the right resolution.
View 4 Replies
View Related
Mar 30, 2011
ive installed ubuntu for netbook on my laptop, everything went fine, it installed ok, and it was all good, until i tried clicking on the icon im supposed to click on to get conncected to wifi. where it's supposed to have various wireless networks it says "device not ready (firmware missing)" and ive tried everything i can think of to get it working, but it wont work. the same thing happens with my desktop computer, but with ubuntu desktop 10.10 and linux mint... but with the desktop, its probably just a case of finding drivers for my specific wireless adapter, in which case can anyone tell me where i can find the driver for a belkin F6D4050ea for linux?
View 1 Replies
View Related
Oct 11, 2010
I have tries numerous methods to connect my laptop running Fedora 13 and my Netgear WGPS606 print server all without success. Has anyone made a successful connection and if so how? when running Windows 7 I have no trouble. Both Windows 7 and Fedora connect to the internet without a problem.
View 1 Replies
View Related
Mar 14, 2010
I have tried installing 11.2 64 bit with Gnome. Every time if finishes the install and reboots it will start HAL daemon and just black screen. I have tried loading with using the number 3 with no video. Same thing black screen after loading HAL daemon. I did a install with selecting VESA same thing.
View 9 Replies
View Related
Apr 19, 2015
I have a laptop and an external monitor connected via displayport. I can configure both displays via settings with correct resolution and arrangement. However, this configuration is not sticking, and every time I shut down the laptop or close the lid I will need to fight with black screens and more to bring the same configuration again. Basically, it seems that the monitor is "stealing" the primary role to the laptop's native screen (I have it configured as secondary, but also being primary the configuration gets messed).
After many trial & errors, this is the routine I have found to make things work every time I boot / awake the system:
1. Boot. Laptop's display shows the booting sequence.
2. When the login screen should appear, laptop's display goes black, monitor shows background.
3. If I press F9 to increase brightness, the brightness icon appears in the monitor, but it is stuck at the minimum.
4. The only way to leave this point is by pressing F7 (project screen) and then F9 again to increase brightness. Then the laptop's screen does light up.
This is when I'm lucky. Sometimes the configuration goes mad and I get mirrored displays and different resolutions, without touching the settings myself. Also, if I unplug the displayport I run the risk of getting stuck with a black screen in the laptop, without any way of recovering the GUI other than rebooting (Ctrl Alt F2 will still show the command line screen).
My system is Debian 8 testing up to date, running in a Lenovo T430 with Intel components. I'm not sure the monitor is relevant here, but in any case it is an Eizo CS240.
View 3 Replies
View Related
Jun 8, 2011
I have a Lenovo T410 laptop. I'm unable to find drivers for the ethernet card, the wireless card and graphics. I don't even know what hardware is installed in the system. Here is the product ID if it can help in identifying the hardware.
Product ID : 2516CTO
View 9 Replies
View Related
May 10, 2010
I bought thinkpad t410 (2516cto) and just finished the installation of opensuse. I havn't noticed some incompatibilities yet, but there's no wireless. the wireless card is :Intel Centrino Advanced-N 6200. Anyone has any clue what's the reason? seems that the card was not recognized in opensuse yet.
View 4 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Feb 24, 2011
Forgive me if this has been answered, but searches have been un-fruitful. I recently built a 64 bit Ubuntu 10.10 pc. It is sitting right next to my Windows 7 Premium 64 bit machine. They can't see each other. I disabled Homegroup on my network. Now, when I try to access Ubuntu from Windows, I am prompted for a username and password. Both systems have the SAME UW and PW. It doesn't connect.When I go from Ubuntu to connect to Windows, I am prompted or Workgroup passwords.
View 6 Replies
View Related
Apr 28, 2011
I was wondering if it is possible to SSH into my home PC and enable the VPN I have already set up there? After loads of Googling I have been unable to find the command!
View 2 Replies
View Related
Jan 19, 2010
I'm running Ubuntu 9.10 Live CD and I can't connect to the internet. I click on System --> Preferences --> Network connections and under the tab DSL I click Add. After i fill the information I click to connect to the new connection and after a while it shows me a baloon which says "Wired network: Disconnected - you are now offline".
View 1 Replies
View Related
Feb 5, 2010
I have often connected to my machine's remotely through ssh. Today I noticed that when I connect, the "last login" IP seems a little weird to me. I'm on my home network, so I connect directly with the IP of the computer within the router. But after the IP I get this XXX.XX.X.XXX.dedicated.neoviatelecom.com.br What is the neoviatelecom part? Is that normal? I don't remember ever seeing that there before. If I connect a couple of times from my win7 laptop (through cygwin) I get the correct IP address, but followed with the other part. If I connect with my other desktop (running Karmi 9.10) I get the same neoviatelecom thing as above.
View 9 Replies
View Related
Mar 4, 2010
Installed Ubuntu 9.1 - Linksys WUSB600 connects but no network access. I get "server not found", so no data being xmtted. It worked fine in ver 9.04 but not in 9.1
View 1 Replies
View Related
