My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again. When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
Installed fedora 13 to hard drive on fresh partition,installed ok,ran updater,installed all updates.all working ok but fedora is not able to detect my laptop monitor.i am unable to increase resolution.stuck on 800 * 600. when a window in open and i need to click at the bottom of the window i cant because it is bellow the screen.I went to [URL] to look for drivers.it only shows display drivers for red hat 7.0.i tried them but wont install.is thier drivers i can use for fedora 13,or a way to force resolution into 1024*768.
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
My system can't seem to detect the external monitor that I've plugged into my laptop using and HDMI cable. The monitor works when I'm booted into Windows so I know that it isn't a problem with the monitor or the cable.
When I run xrandr I get.
Code: Select allScreen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192 LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 310mm x 174mm 1600x900 60.00*+ 39.99 1440x900 59.89 1360x768 59.80 59.96 1152x864 60.00 1024x768 60.00 800x600 60.32 56.25 640x480 59.94 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)
I'm running OpenSuse 11.1 with a Dell Inspiron 6400. I just bought a Medion Multi-Touchscreen-Monitor cos they were going cheap at the local supermarket. It says the touchscreen works with Windoze 7 only, but I thought its worth a go as I have 30 days to try before taking it back.
The monitor output works fine. I had to adjust the resolution setting but that's okay. However, when I plug in the touchscreen usb lead I've no success yet. I tried all the touchscreen Vendor/Name options in Yast->Hardware->graphics card/monitor but to no avail.
My dmesg output is:
Quote:
usb 4-1: new full speed USB device using uhci_hcd and address 5 usb 4-1: configuration #1 chosen from 1 choice drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed usbhid: timeout initializing reports
Brand new Dell XPS 15 laptop. NVIDIA GeForce GT 420M graphics card with Optimus. 15.6HDF TLF LCD L501X screen. Centos 5.5 64 bit, text install.
I downloaded and install the NVIDIA graphics driver NVIDIA-Linux-x86_64-260.19.29.run When I run system-config-display the display configuration appears but is very, very faint. Increasing screen brightness has no effect.
I have slackware 13.1 installed on my laptop and use kde.I just bought a new external monitor 1680 X 1050. The laptop's monitor is 1280 X 800. From KDE i configured laptop's screen to be inactive and the external monitor at resolution 1680 X 1050. When i boot and enter KDE both monitors are activated, ican't understand their resolution. Then, just when i enter system configuration-monitor-monitor configuration the laptop's monitor automaticly turns off. Then i configure the external to 1680 X 1050 resolution. This happens every time i have to enter slackware. How to setup my xorg.conf file. You can see it below:
My brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
I have been using Ubuntu for a while now on my netbook, however I have an older HP dv5 laptop that hasn't been used in a couple of years that I would like to format and install a linux distro on. Problem is that it has a very broken LCD screen and I had been previously using an external monitor with it. I had tried to install Ubuntu 9.04 on it at one point but could not progress very far into the installation due to the external monitor. I had also tried using the non-graphical installer but had little success with it as well.
I had thought of removing the HDD from the laptop and putting it into another of my laptops and installing it that way, but the specs are different between the two laptops and I figured that it would not work properly once the HDD was switched back to the older laptop. Is there any way to use an external monitor to install a newer version of Ubuntu? or perhaps is there another distro that is easily installed using an external monitor? My plan is to eventually remove the broken screen all together and only have the external monitor connected, the broken screen is a bit unsightly.
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
I've been unable to connect an external monitor to my laptop running 10.04, even though the resolution and framerate are right. The monitor says something like "unsupported video settings".
In other news, I put the live cd into another computer which relies on a monitor and after the very first screen with the two logos at the bottom, the monitor decides to go to sleep. I try with another monitor and it just seems to have to feed. This is the more important problem, but I wonder if there isn't some built-in problem with 10.04.
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
I don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
I've got a laptop running Backtrack4 and an external tv/monitor. Is there a program/command/configuration file that I can use to allow my laptop and monitor to connect with one another via HDMI?
I am having a Dell ST2410 LCD and a laptop IBM.I want to span my desktop so that some portion is on laptop and some on external monitor. I tried xdmx but it did not worked.
I'd like to solve a little problem that I have connecting my notebook with an external VGA monitor.Everything seems to work fine, but when I close the laptop monitor, also the external monitor shuts down.I've tried to find different energy-saving setting for laptop display and external monitor. with no luck...My video card is an ATI Radeon Xpress 200M. On the ATI website there is no catalist control center for linux. (It would be very useful). So, for now, I can only use the display options on the panel.
I've been trying to get it to work on my laptop off and on for several years now, experimenting first with Redhat (version 6.1, I think) and now trying with Ubuntu 9.04. I've done a full install using the entire hard drive (no dual boot). So I'm trying it for real this time. I'm having a problem with my video drivers. The video is ok (not great) and I don't seem to have any options to adjust it.
When I go into system > preferences > display, I see monitor "unknown", set at 1024x768 with a 75 Hz refresh. If I click on "detect monitors" nothing happens. It says under system > administration > hardware drivers that "no proprietary drivers are in use on this system". I've got two options:
[code]...
For the first part of boot, I have access, but then when it comes up into Ubuntu, the big monitor (a Dell 2500, I think, plugged into the stock Toshiba docking station via DVI) quits working, and all I have is a dim picture (dark, like something's sapping power from it) on the laptop display.....
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code: Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection
I have a netbook (Acer Aspire One) I'm running Slackware 13. and usually, I prefer to connect an external monitor. When I switch my machine on with the monitor connected, the display is duplicated on both screens and since I just want the netbook's screen to be off and only see the display on the external monitor, I can doxrandr --output LVDS --off
Great! However, it's a hassle to do this every time I log in and I'd like to automate the process if possible. I did some googling and I found that if you want to automate xrandr commands, you can put a script in /etc/X11/Xsession.d/ (see this). I wrote the following script to automate my xrandr commands and since the Xsession.d directory didn't exist, I tried creating it. The script was called 45custom-xrandr_settings, as the one on the RandR wiki is called the same.
Code: #!/bin/bash # Check whether the external monitor is connected
I just got a new laptop, and installed fedora 13 on it. I have had no major problems, until i tried to hook up a external monitor. It does not show up in the gnome-display application, and the keyboard switching button combination (Fn+f#) does not work. On my past laptop, this worked fresh from the install, f8->f10->f11.
System:
Dell Latitude E6410 nVidia Corporation GT218 [NVS 3100M] (rev a2)
I have a ViewSonic (VA1703w) LCD and Fedora 14 is not detecting it. I want to change the resolution but it is fixed to 1024x768. I have also tried to add the resolution in xorg.conf but no effect.
i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
Today my desktop reverted to 1024x768 resolution immediately after init. I tried changing it back but only 1024x768 and 800x600 are listed as supported in the display settings, even though my monitor supports resolutions of up to 1360x768. Rebooting the system did not solve the problem.I'm running Fedora 15 x86_64 on kernel 2.6.38.8-35 with the proprietary nvidia drivers of version 275.09.07. My monitor is a Samsung SyncMaster 933n. nvidia-settings is apparently not detecting it correctly, it thinks I'm using a CRT monitor.I was actually in this exact same situation a few months back, but it kind of went away on its own, so I didn't mind too much. So, what could be causing this, and what can I do?
OS: Fedora 12 Video card: ATI Radeon 9200 series Monitor: ViewSonic 19"
I installed Fedora 12 configured Gnome automatically. Generally default settings. My monitor was connected directly to the video card and all was good. My video card was detected and my monitor was detected as ViewSonic Corporation 19" and I can set the screen resolution to 1280x1024. I had no xorg.conf file, as it seems that Fedora 12 does a great job of PnP to just set everything up.Now I go and complicate things by hooking up my monitor through a KVM switch. All of a sudden my monitor is "Unknown" and the best resolution I can achieve is 800x600.
Sure, I could go and reconnect without the KVM, but I want to be able use it.Is it possible to edit xorg.conf to tell it "Trust me, just use 1280x1024 at 60Hz even though you can't figure out what the monitor is"?
I tried a number of the posted suggestions to generate xorg.conf files but none of them get me what I need. A simple sample file listing that does the minimum is greatly appreciated (I can experiment from there once I get a basic setup working).And can someone explain if it is X or the ATI driver that is getting confused by the unknown monitor type. It helps to know what is actually going on in addition to a fix (so I can figure it out myself in the future). Thanks!
