I've got a laptop running Backtrack4 and an external tv/monitor. Is there a program/command/configuration file that I can use to allow my laptop and monitor to connect with one another via HDMI?
View 1 RepliesI have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies View RelatedI am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
I have a weird problem, i have an LG LCD screen that i connect to my laptop via HDMI through nVidia. I was watching full length movies and everything worked perfectly. So, i got myself a new, slightly bigger LG LCD, and now, when I play a movie, about 20-60 minutes into the movie, my machine just turns off. doesnt even shutdown properly, just turns itself off, as if the power ran out (which it didnt..)
I thought maybe i had too many things installed, or mabe i should wait for a new version.. so i waited till i reinstalled a fresh 10.4 on a new partition, played a movie, and again, the machine just suddenly turned itself off.
i tried looking in the system log viewer, but between shutdown and startup, i see nothing special (besides ALOT of "rt_ioctl_giwscan. 1(1) BSS returned, data->length = 105")..
i tried running 64bit & 32bit and it has the same error.
I have slackware 13.1 installed on my laptop and use kde.I just bought a new external monitor 1680 X 1050. The laptop's monitor is 1280 X 800. From KDE i configured laptop's screen to be inactive and the external monitor at resolution 1680 X 1050. When i boot and enter KDE both monitors are activated, ican't understand their resolution. Then, just when i enter system configuration-monitor-monitor configuration the laptop's monitor automaticly turns off. Then i configure the external to 1680 X 1050 resolution. This happens every time i have to enter slackware. How to setup my xorg.conf file. You can see it below:
[Code]...
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
View 2 Replies View RelatedI have been using Ubuntu for a while now on my netbook, however I have an older HP dv5 laptop that hasn't been used in a couple of years that I would like to format and install a linux distro on. Problem is that it has a very broken LCD screen and I had been previously using an external monitor with it. I had tried to install Ubuntu 9.04 on it at one point but could not progress very far into the installation due to the external monitor. I had also tried using the non-graphical installer but had little success with it as well.
I had thought of removing the HDD from the laptop and putting it into another of my laptops and installing it that way, but the specs are different between the two laptops and I figured that it would not work properly once the HDD was switched back to the older laptop. Is there any way to use an external monitor to install a newer version of Ubuntu? or perhaps is there another distro that is easily installed using an external monitor? My plan is to eventually remove the broken screen all together and only have the external monitor connected, the broken screen is a bit unsightly.
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
Code: Select allsudo echo 950 > /sys/class/backlight/intel_backlight/brightness
and the laptop screen turns back on.
I'm wondering: Is there a way to streamline this so that it happens on boot, but after GNOME loads?Or: Is there a better method to solve this?
I've been unable to connect an external monitor to my laptop running 10.04, even though the resolution and framerate are right. The monitor says something like "unsupported video settings".
In other news, I put the live cd into another computer which relies on a monitor and after the very first screen with the two logos at the bottom, the monitor decides to go to sleep. I try with another monitor and it just seems to have to feed. This is the more important problem, but I wonder if there isn't some built-in problem with 10.04.
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
View 1 Replies View RelatedI don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
View 3 Replies View RelatedI am having a Dell ST2410 LCD and a laptop IBM.I want to span my desktop so that some portion is on laptop and some on external monitor. I tried xdmx but it did not worked.
View 6 Replies View RelatedI'd like to solve a little problem that I have connecting my notebook with an external VGA monitor.Everything seems to work fine, but when I close the laptop monitor, also the external monitor shuts down.I've tried to find different energy-saving setting for laptop display and external monitor. with no luck...My video card is an ATI Radeon Xpress 200M. On the ATI website there is no catalist control center for linux. (It would be very useful). So, for now, I can only use the display options on the panel.
View 4 Replies View RelatedI have Dell Vostro 3300 with Intel HD integrated graphic card and Samsung SyncMaster 2343BW external monitor.
This is the output of xrandr:
It runs on 2048x1152 full resolution, however, the picture on the monitor is blurry, it vibrates and looks like old TV with interlacing.
I tried to disable output to LVDS screen on laptop using xrandr but it doesn't help/
Previously I had HP laptop with integrated Intel and OpenSuse 11.0 and the external screen worked normally.
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
I have a netbook (Acer Aspire One) I'm running Slackware 13. and usually, I prefer to connect an external monitor. When I switch my machine on with the monitor connected, the display is duplicated on both screens and since I just want the netbook's screen to be off and only see the display on the external monitor, I can doxrandr --output LVDS --off
Great! However, it's a hassle to do this every time I log in and I'd like to automate the process if possible. I did some googling and I found that if you want to automate xrandr commands, you can put a script in /etc/X11/Xsession.d/ (see this). I wrote the following script to automate my xrandr commands and since the Xsession.d directory didn't exist, I tried creating it. The script was called 45custom-xrandr_settings, as the one on the RandR wiki is called the same.
Code:
#!/bin/bash
# Check whether the external monitor is connected
[code]...
My laptop has a dual boot Debian + Ubuntu installation.
In particular I am using Debian 8.0 with stock kernel 3.16.0-4 (or equally 4.1.10 custom compiled, I tested it and it does not make any difference for the subject of this post).
Ubuntu is 14.10, with stock kernel 3.19.0-15.
In both installations I have nvidia nouveau drivers and intel integrated graphics drivers installed and loaded. This is the default for both installations.
In both installations I have xorg automatically configured (no xorg.conf file present in /etc/X11). In both systems the content of /usr/share/X11/xorg.conf.d is the same for what moitors are concerned (differences in mice and trackpad entries).
Unfortunately, the video configuration in Ubuntu 14.10 works out of the box. In particular I can plug in an external monitor/projector and it will fire-up the nvidia card (nouveau drivers) to power that monitor.
Debian 8.0 on the other hand does not even detect the external monitor.
I don't know where to start to solve the problems.
The hardware is as follows: the laptop (lenovo W530) features both an Intel integrated graphics card and an Nvidia K1000M. The VGA port is connected only to the Nvidia card (this is according to my online research, as I don't know how to check this).
setup the correct mode for my laptop-video card-monitor
Video card - ATI mobility Radeon X1600
External Monitor - Belinea b.display 2 22"
Right now the external monitor is working, but sometimes it goes black for 2-3 seconds and then works again. This happens sometimes 5 times in a row, sometimes once, sometimes none. Other issue, when I install any new kernel it doesn't work. I get weird picture on monitor.
I want to install a plugin on my laptop that will allow me to play Mp3 CD's. How can I do this?
View 1 Replies View RelatedI know that this laptop (Asus UL30A) does support playing HD material with the help of the GPU on windows. The question is how can I do this under linux? The CPU load as is implies that this is not activated. I assume that it's limited to a handful of codecs. But which player supports this, if its even supported at all?
View 2 Replies View RelatedI am using Fedora 13 as OS,but it cant play audio or video in Movie player or rythm box.Always it asks for additional plugins" MPEG- Layer 3(MP3) decoder.I installed RPM Fusion then rpmfusion-free-release-12-3(noarch) but could not succeed.After installing Fluendo only Audio is working.But No video is playing.Every times i get Message "Additional Plugins Required....MPEG 2),Can it really possible to play All video on fedora 13?
View 1 Replies View RelatedI am using debian 6.0.0 The video files are played by default in totem.I like gmplayer. Also I want to make script for intelligently guessing as follows Get all the names of file in <folder-containing-video>. See which of them (among *.srt.*.sub.*.ssa) has maximum number of characters matching with video name. That file will be parameter for sub option .
I saw a desktop entry for gvim which is like gvim -f %F -f means foreground I can try
gmplayer -vo xv -sub what-should-I-write-here %F
How con i install win32 codecs (free)in 0pen suse 11.... I have got gstreamer codec pack but on compiling it says missing packages like c, gcc, glib...etc...how can i get them from where do i get them....
View 1 Replies View Relatedthe movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View RelatedToday encoders are getting smarter. They can compress Blu ray similar quality in 700MB. It seems header of video file contain info about frame rate, audio/video encoder etc. which can't be guessed. In MPEG audio , every part of file is independently playable. If a movie is binary split into 6 parts & I don't have the first part then it is unplayable.
Code:
example
ls
-rwxrwxrwx 1 root root 280M 2010-12-07 20:23 irn2-cd1.mkv
-rwxrwxrwx 1 root root 50M 2011-05-26 13:09 last-50M-cd2
-rwxrwxrwx 1 root root 50M 2011-05-26 13:44 first-50M-cd1
file *
first-50M-cd1: Matroska data
last-50M-cd2: data
irn2-cd1.mkv: Matroska data
I have BackTrack 5 installed to my hard drive. I understand that this distro is focused on hacking. I think it is focused on hacking so much so, that there are a multitude of dependancies involving video and even audio, and especially media players omitted. So I was wondering if anyone has ever done this, and I think this is an issue that many wouldn't mind addressing despite finding no similar threads. Any media player I attempt to install requires numerous other files and installations to be present. So I go looking for these other software and when I try installing many of them, they too need software updates. And of course it branches and branches.
View 3 Replies View RelatedPossible Duplicate:
Can I use my laptop as a second monitor for my desk computer?
My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux.