Fedora Networking :: Nmbd Doesn't Want To Start At System Startup
Jan 25, 2010
I It does not start when the system boots. The smbd daemon is present and there are no suspicious messages in the system log, dmesg or the samba logs. The nmb service *is* enabled at all of the relevant run levels and does start if I issue the command "service nmb start" as root after I log in. This particular box's networking is 802.11n via a usb port and is under the control of the network manager. I have another fedora 12 box with an internal intel 5100 802.11n card and it does not have this problem.
How to add something to start when you are logged in (System -> Preferences -> Startup Applications), but I want to know, where this parameters stored.
I am not sure why, but my wireless networking icon on the top right of the panel doesn't show up any more during startup. Previously during startup, the applet would show up and then after a while connected to my wireless network seamlessly.
The only thing I did before and after it stopped working was to enable auto login. I cannot disable auto-login through the GUI and according to postinings in the forums no one knows how to do it through the command line interface.
In the 'Startup Applications' menu it is checked for startup with the command line saying "nm-applet --sm-disable". What can I do to have the network manager icon automatically startup when I turn on Ubuntu? Right now I get it to work by typing "sudo nm-applet" in the terminal window and then pasting my wireless encryption key.
The time the server smbd and nmbd functioned normally but when I restart the service he returned smbd nmbd not normal but when I try to start it the following error occurs:
Code: service nmbd start start: Job failed to start service nmbd status nmbd stop/waiting
/dev/md0 (made from sda1 and sdb1) RAID1 /boot partition /dev/md1 (made from sda2, sdb2, and sdc2) RAID5 / partition
Earlier on I had some trouble with my sda drive, it dropped itself from both arrays, screwing up the mirroring of my two raid partitions participating in the /boot partition. I eventually got everything sorted out and back in sync. (I also have grub installed to MBR on both sda and sdb). Things are working fine regarding that, but since then I've had this issue:
During boot up, I'll get an error message that it could not mount my /boot partition (when fstab is set to either /dev/md0 or the UUID). It claims c9ab814c-47ea-492d-a3be-1eaa88d53477 does not exist!
My fstab:
Code:
[mark@mark-box ~]$ cat /etc/fstab # # /etc/fstab # Created by anaconda on Wed Jan 20 16:34:41 2010
[code]....
As far as I know, it isn't neccessary for /boot to be mounted always, correct? Although, as I understand, I need to have it mounted whenever making kernel changes correct?
A lot of times when I start up my computer, instead of the graphical login screen I'm brought to a CLI login. If I log in and do "startx," it'll start KDE, but sound doesn't work and the shutdown/restart options disappear. (The logout option is still there.) It's inconsistent; sometimes it'll start the GUI and sometimes it won't. I have yet to find out what causes it to work right and what causes it to bring me to the CLI. When it doesn't work, if I run "shutdown -r now" or "shutdown -h now," it'll start the GUI as the computer is shutting down. I've tried Ctrl+Alt+F7 when it's brought me to the CLI, but it didn't do anything
Conky does not start during start up.I used this script, It has execute permission also!But it did not start! What is the problem!It works manually when i run that script!
Note: It is not working in the background also at startup as i checked it -When is run killall conky it showed No such process
I recently updated to Ubuntu 10.04. On this same machine I've used Ubuntu for 3 or 4 years now. Upgrading from 8 - 9 - 10. I love Ubuntu and use it as my everyday work environment. Anyway, recently when I start my machine in the morning it boots to commandline instead of the desktop. For the last couple days I boot to safe-mode and do a package repair. Sometimes more than once. Eventually I get the desktop to start but it is annoying. When trying to boot to Fail Safe Graphics Mode(?) I get an error stating: "Fatal Server Error: No Screens." The message referred me to /var/log/Xorg/failsafe.log. Here is a snippet of the end of that log file:
[code]...
Also, I'm using an NVidia graphics card on an HP machine. I installed the "current version" accelerated graphics driver which it says is proprietary.
I'm having a strange behaviour with GRUB, and I don't know much about it. The problem is that GRUB is looking at the wrong place when it starts. I have a /boot partition (/dev/sda1) with everything for booting and grub. This gets updated when I update, say, the kernel, grub, etc. But I also have a /backups partition (/dev/sda4) with a directory /backups/boot/grub that is a copy of /boot/grub. The /backups/boot directory only has the /backups/boot/grub directory, not the kernels, etc.
If I delete the /backups/boot/grub directory, I get a "grub>" console at startup, and system doesn't boot. SO: Why is grub looking at /backups/boot/grub instead of /boot/grub and how can I fix this? This is my grub.conf, identical in both directories, and both pointing to /boot=/dev/sda1=(hd0,0):
Every time I start Ubuntu, I set up an ssh session to a server. In order to automate this I made an entry in startup programs like this:/usr/bin/gnome-terminal -e '/usr/bin/ssh name@server.com'Nothing happens when I log in, and I've checked that the command works.
I need to start vboxwebsrv and x11vnc on startup with a specific username.I tried entering the commands in rc.local as:/bin/su -c "/x11vnc -forever -usepw -httpdir /usr/share/vnc-java/ -httpport 5800" user1/bin/su -c "/usr/bin/vboxwebsrv -b" user2.But this does not start the app on startup.
my Conky needed the Coretemp, and a friend of LQ told me to run modprobe, and it works greate! no every time I start my system, I need to run the modprobe to add the module to Kernel. How can I put the coretemp to start every startup? (I think there is somenthing to do with a file on the rc.module at /etc/rc.d/, but I'm afraid to do something stupid...) I want to make the conky running after start of the system. How can I do this?
I am running ubuntu 10.4, windows 7, and I had ubuntu 10.10 on a single hard drive. I upgrade the 10.10 system to 11.4 and now my grub menu which is on the 10.4 system shows two windows and two 11.4 installations.
How can I clean this up? Also I have tried to start with the grub 1.99 on the 11.4 system and all I get is a black screen at startup. I am happy with grub on 10.4 except for the extra lines.
I have installed Oracle 11g on 5.3. Now, I am trying to START and STOP oracle automatically on system startup and shutdown. I am following this link To have this effect, I have created /etc/init.d/dbora
I installed ISE 12.2 DSP edition trail version and I have matlab 2009b edition. After a brief search I found [URL] this. But directory hierarchy is different in 12.2 than that of mentioned in that forum link.
I have installed matlab at /home/trans/Matlab and xilinx at /home/trans/Xilinx. Though I have sysgen_startup.m at /home/trans/Xilinx/ISE_DS/ISE/sysgen/util if I try to run sysgen by using command "./sysgen" I get error as
ERROR: Could not find SysGen startup script at "/home/trans/Xilinx/ISE/sysgen/util/sysgen_startup.m". As per the above mentioned link I found sg_config at /home/trans/Xilinx/ISE_DS/ISE/sysgen/bin/lin and used command "./sg_config -install_to_matlab /home/trans/Matlab" I get message like this
[Code]....
I didn't understand the above error. I have chosen matlab workspace as /home/trans/Documents/MATLAB but I haven't pointed anything to that location.
So finally how do I set environmental variables at /home/trans/Xilinx/ISE_DS/ISE and how do I get sysgen to work? I installed ISE from the DVD which I got from xilinx
I have Slackware 13.1 x64 and my graphic card is ATI Radeon HD 2400 on my laptop. I install from ATI official site driver for this card and now when I try to come in System Settings->Desktop I got this error:
When I was using polipo on Ubuntu, it automatically start at system boot. Now I'm using opensuse, I installed polipo from the repository, however, I have to manually start it by using "sudo polipo". If root privilege is not given, polipo won't work correctly. What should I do to make it start at boot automatically?
a friend told me to creat /etc/boot.local, with code...
Application: Dolphin (dolphin), signal: Aborted [KCrash Handler] #6 0xffffe424 in __kernel_vsyscall () #7 0xb5bad7ff in raise () from /lib/libc.so.6 #8 0xb5baf140 in abort () from /lib/libc.so.6 #9 0xb5dc17dd in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6 #10 0xb5dbf533 in ?? () from /usr/lib/libstdc++.so.6 #11 0xb5dbf56f in std::terminate() () from /usr/lib/libstdc++.so.6 #12 0xb5dbf6d1 in
[Code]....
Questions:
1) How can I learn which packages I've deleted or installed to make the changes back - I mean install deleted packages and delete installed by mistake?
2) Is there an instrument to make a complete system roll-back to some time point?
I have a headless mythtv running 13, when there's no monitor connected X doesn't start. If I plug a monitor in it still doesn't do my any good as there's no kb/mouse either. I know the system has booted fine as I can connect to myth remotely. This a slackware or x problem? Want to run x11vnc here but without x I can't do that.
I have a server with 3 interfaces. Only one of them comes up after boot tho (the one with the cable plugged in). When I start dhclient the others show up in ifconfig... Could it be just cause there is no cable plugged in them? Or then how do i bring them up automatically without having to issue dhclient myself after boot?
I have to type /etc/init.d/network start everytime after log in.I search little over internet and found out some command to fix it so i tried it but i got error response.Here is what i typed and what i got response.[root@winn ~]# system-config-netbootbash: system-config-netboot: comman not foundI also tried to find setting but i could not under Applications > System Settings > Server Settings > Network Booting Service.Also my ifcfg-eth0 files is below:
I have a Broadcom 4312 wireless chip. I have use the STA drivers that Ubuntu recommends. I can connect quite easily just by clicking on the icon, so this is more than a niggle than a problem.
My network isn't protected as we live in the middle of nowhere (quite literally) and network theft isn't a problem. We also run a self-catering cottage, and let guests have free access to our network anyway, so it is easier for guests to access our network without me having to give them all the key. When I did use wpa, it would start itself up with the laptop, so I kind of know that this might be the cause. Is there any way I can fix it without encrypting the network?
I have xbmc, a media center shell that runs on ubuntu. I am trying to set up a laptop to run it and be a full time media center. so far it works great, I installed xbmc live, but the only issue is I have a wep2 protected wireless router and the wifi does not connect automatically.
I have it set up and am using wpa_supplicant once those commands are run the wifi works great.I am a novice in linux in general, and can not seem to get this to work on startup, can anyone point me in the right direction on this? I haven't been able to find the xbmc start up script if one exists, I figured adding those lines to it might work,does this sound like a reasonable approach? if anyone knows where that is and how it is defined to be launched on start-up i would appreciate it(I guess this is getting into the general Linux knowledge but still good info)
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
I booted up the computer (Fedora 11) and it hung at the blue screen with the F bubble in the middle. I waited for quite sometime without any change to the system I held down the power button to power off and tried starting the computer again with the same result.
When the sytem reboots and I press alt+ctrl+2 i see messages like below on the black screen:Unknown username "root" in message bus configuration file.Could not get password database....Failed to start message bus: Could not get UID and GID for username "dbus"..Please help me get the system up. I saved some data and did not take a backup. Is there's a way I can restore my system to a previous date? Or backup my data somehow?
I am setting up a system for students to use to run lab-based exams. On bootup, the system needs to download an encrypted file containing the exam files, and then ask for a decryption password.
I want to do this during system startup (before anyone logs in). But I am having trouble getting keyboard input at this point.
I've put a script in /etc/rc.d/rc5.d/S99examsetup along the following lines:
but it doesn't respond to keyboard input. I have tried appending "< /dev/console" but this also doesn't work; in fact if I insert 'tty' before the first 'echo', it tells me that /dev/console is the tty being used for input anyway.
Is there a way round this? I can use plymouth ask-for-password, but that doesn't seem very portable, and it interacts badly with the graphics driver on one of my machines.
I am currently in place where I get high speed internet connection. I am using F15 64 bit version. I've installed a lot of softwares and updated theOS completely. My question is is there any way that I can create a startup disk of my system so that I can install it in other system of same configuration.
LibreOffice 3.4 shows up as installed and in my applications menu, but when I try to open it (either through the menu or by opening a file) it shows up with the spinning thing in the task bar but then disappears and never opens.
