Ubuntu Installation :: Start With The Grub 1.99 On The 11.4 System And All Get Is A Black Screen At Startup?

May 8, 2011

I am running ubuntu 10.4, windows 7, and I had ubuntu 10.10 on a single hard drive. I upgrade the 10.10 system to 11.4 and now my grub menu which is on the 10.4 system shows two windows and two 11.4 installations.

How can I clean this up? Also I have tried to start with the grub 1.99 on the 11.4 system and all I get is a black screen at startup. I am happy with grub on 10.4 except for the extra lines.

[Code]...

View 9 Replies


ADVERTISEMENT

Ubuntu Installation :: Black Screen At Startup After Updating 10.04

Sep 12, 2010

After updating ubuntu 10.04 a few days back, I get a black screen at startup without a flashing cursor or anything. I'm kind of new to ubuntu but not completely.

System specs:
Processor: q6600
Graphicscard: xfx nvidia gforce 9800gtx+
Motherboard:asus p5ql pro
2 HD's 320gb and 250gb

I'm dual booting with windows 7.

View 3 Replies View Related

Debian Installation :: Black Screen Right After Startup Post Install

Feb 23, 2016

I have installed Debian Jessie 8.0.3 64-bit net install on a MSI CX620. Installation went fine but trying to boot it up the first time nothing but a black screen shows up. I've tried:

Holding shift on startup - Nothing

Press down all keys - Not much, only ctrl+alt+delete makes the screen turn off and then on again.

I'm thinking that I had secure boot on which I now after installation see could be a problem, but I didn't think it would be a problem as I could just go into bios and turn it off, but seeing now that I can't even go into bios it may be a problem.

View 2 Replies View Related

Debian Installation :: Black Screen After Grub Loading Screen?

Feb 22, 2011

another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.

View 9 Replies View Related

Ubuntu Installation :: Black Screen On Start Up?

May 15, 2011

So I got Ubuntu installed alongside my Windows, but now when I start I get a message on my monitor saying about input not being support or something; usually happens if the resolution isn't supported. If I hit random buttons eventually Ubuntu will start up, but I don't want to be doing that every time I remember when I had an older version of Ubuntu a screen would appear where I could pick to start either Ubuntu or Windows, so I assume that's what's going wrong.

View 9 Replies View Related

Ubuntu Installation :: Black Screen With No Cursor From GRUB In 10.10

Feb 26, 2011

I have installed Maverick onto an INTENSO 320GB USB Hard Disk. I can boot from GRUB, but only get a dark grey screen, with no cursor. I have tried editing the boot script, removing "quiet & splash" and putting in "nomodeset". I have also tried "i915.modeset=1" and "i915.modeset=0". Also "xforcevesa" and "nouveau.modeset=0". None have worked. I have not been able to reach a console screen to log in. Here are the specifications of the machine:

[Code]....

Are the number of spaces between "ro" and "quiet and splash" essential? There are three spaces on the boot script and I have left them there. Ubuntu works fine as a live CD, and I experienced no problems with the installation.

View 9 Replies View Related

Ubuntu Installation :: 11.04 - Grub Black / Blank Screen

May 31, 2011

I am installing 11.04 on a Gigabyte E7AUM-DS2H with an onboard GeForce9400. I'm trying to turn this into an XBMC htpc. I'm not using xwindows or anything like that. Going straight to console for now. I'm experiencing the GRUB Black/Blank screen. I just don't know what else to try...

1. I've changed the kernel boot options, i.e. nomodeset
2. I've toggled the GRUB_GFXMODE=640x680 line
3. I've remembered GRUB-UPDATE
4. I can get into GRUB menu using SHIFT at bootup, messing around with settings and CLI there
5. I started with default nvidia drivers (not good), and then installed nvidia-current - that works better.
6. At the blank screen, I can hit ALT-F1 into console/tty fine.
7. If I use nosplash --verbose, I get a long wait with a blank screen, then the last bits of the bootup log and the login prompt.
8. And stuff I've forgot I've done....

Now what I really can't understand is that I have XBMC installed AND working beautifully. I can set XBMC to autorun with no trouble at all. It's just the period between bios and XBMC that it all goes dark. When I quit XBMC, I get a blinking cursor, which I can F1 to the console. What is it with GRUB??? What am I missing? Why is this so difficult? I COULD live with it, but its just not right, and I want to get it right.

View 6 Replies View Related

Ubuntu Installation :: Grub Broken + Black Screen On Boot

Jun 15, 2010

PC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.

Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.

Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.

View 6 Replies View Related

Ubuntu Installation :: Black GRUB Screen After Update Manager Run?

Sep 3, 2010

I have Ubuntu 10.04 installed on dell inspiron 5150. Original installation was perfect. Wireless Internet worked right away. Screen resolution was perfect. One day, after a month or so, after original installation I got a notification that new updates are available. So, I installed all updates. At the end there was a notification: Update is successful, please reboot. After reboot I got a black screen with the header:

GNU GRUB version 1.98-1ubuntu7(I hope it's not a ubuntu version of windows blue death screen). I could install 10.04 from scratch, but I can not do it after every update.

View 1 Replies View Related

Ubuntu Installation :: 9.10 - Black Screen No Grub / Cannot Access BIOS Menu

Jun 28, 2010

I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..

Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).

Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.

View 3 Replies View Related

Ubuntu Installation :: Upgrade From A Live Disk - After Grub The Screen Is All Black

Oct 21, 2010

My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?

View 3 Replies View Related

Fedora Installation :: Updating To 10 From 8 - Start Anaconda The Screen Remain Black

Apr 3, 2009

I've some problems upgrading to version 10 from version 8. My workstation is certified by RedHat. It's a HP xw6600 with double processor Intel Xeon 5405 2.00 12M/133 QC and graphic card for dual screen Nvidia Quadro NVS 290 PCle. In my OS library I found version 8 to install. It has been installed successfully! However; I've read about advantages for workstation on version 10. Thus, I've downloaded Fedora ISO ver.10 and I've tried to install it in my WS. Here I found a problem: Just in the moment it try to start anaconda, the screen remain black. After three failed intents, I have tried to upgrade my version through the 'yum':

# yum -y update
# yum install preupgrade
# preupgrade

It ran perfectly till anaconda try to run again. Then, I've tried to upgrade to ver.9 from ver.8 and I getting the same problem. I've downloaded the Live CD and that is blocked as well. Of course, I've installed all drivers of my WS before upgrade but I get the same problem. So... How I can fix this problem?... I really need move to version 10. Ah!... I've tried to install beta version 11 but after one hour I get a error messages due at a bug

View 2 Replies View Related

Ubuntu Installation :: Get A Black Screen When The System Starts Up?

May 1, 2011

i have tried to install Ubuntu 11.04 but everytime i try i get a black screen when the system starts up. i have tried to install via cd and the upgrade option.I am currently using Ubuntu 10.04 and this has no problems.I have also tried the esc key when i insert the disc and this brings the option to install but after this i get a black screen again.

View 9 Replies View Related

Ubuntu Installation :: Only A Black Screen After "Startup Disk Creator"?

May 1, 2011

I used "Startup Disk Creator" to make a bootabel USB drive with 11.04. I followed the guide #2 from (I use 10.04). Everything went fine while making this. I re-booted and selected this USB and selected the "Try it" button. I looked at how 11.04 looks like for about 10 seconds and did not do anything and re-booted.Now there is onlyblack screen with absolutely no text and there is nothing I can do [URL]

View 1 Replies View Related

Ubuntu Installation :: After Upgrade System Boots Into A Black Screen

Apr 29, 2011

I upgraded from 10.10 to 11.04 and after the upgrade

- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!

I saw, at the end of the installation process, that the driver for the nVidia video card was removed.

View 9 Replies View Related

Debian Installation :: On IMac: Screen Goes All Black When Chose In Grub-selection List

May 20, 2011

I have installed Debian a few times now (and other distro's), so I'm fairly used to installing linux. I'm not used to installing it on Apple hardware (back in 2009 on my laptop I had some issues that were solved rather quickly, but that's about it). Now I'm installing Debian Squeeze on a new (well, bought today, but it is the previous model: iMac 11,2) desktop iMac.

Installing goes well (resizing partition, rEFIt, booting Debian 6.0.1a netinstall CD, installing packages etc.) I followed a tutorial [URL] to install grub explicitly with force after installing and running gptsync. Everything went according to the tutorial and I rebooted to be welcomed by rEFIt and then grub: perfect!

BUT when I chose Debian in the grub-selection list, I only see a few lines of starting the kernel, and then my screen goes all black. A few seconds later I hear a sound, and iirc it's the sound of gdm prompting to select a user. I cannot switch to a TTY and I have to use the power-button to shut the system down.

View 6 Replies View Related

Ubuntu Installation :: 1104 On HP Desktop - Error Code = 1001 - Doesnt Start - Just Appears A Black Screen

Jun 2, 2011

I install UBUNTU 1104 on HP Desktop PC, but now it doesnt start. Just appears a Black screen with this msg: Error Code = 1001.

I want reinstall but PC is not reading CD, But the CD drive is working.

I install UBUNTU 11 in other 6 PCs, and work fine.

PC inf.: HP Compaq dc5800 Small Form Factor

I never install Windows on this PC. The original OS was UBUNTU 9.04 and updates.

View 2 Replies View Related

Ubuntu :: Black Screen On Startup / Resolve This?

Nov 30, 2010

Recently my laptop running Ubuntu 10.10 has had an abrupt power shutoff (actually several times -- my battery has some problems).

Now when Ubuntu boots, I get the startup screen, but after a few seconds, the screen goes black. I can still boot from the live CD and in fact I am using my computer from the CD to write this post.

A few more details: When I press the power button while my computer is in this "blank" state, I get hard drive activity. Also, if I press "power", and then "enter", the machine actually shuts down.power

View 3 Replies View Related

Slackware :: Screen Goes Black On Startup?

Jul 19, 2011

HP laptop with Intel graphicsunning Slackware current with a 2.6.38.7-smp kernel.Booting with the "nomodeset" kernel parm works but X gets stuck with a 1024x768 resolution. When booting without, the screen goes black after a few pages scroll by, just at the point where the console switches to a higher resolution. Changing to a different console didn't help, so I blindly log on and type startx, and the screen comes back to life with KDE running at the higher 1366x768 resolution, I try a few apps, the webcam, suspend to RAM, resume, and everything is now working flawlessly so it doesn't look like an X issue.At this point I can change to another console (or exit KDE altogether) and the screen is back on at the higher resolution. Looking at the X log and some dmesg output makes it seem that starting X possibly replaces, reloads or unloads a driver? If this is the case, how can I prevent the conflicting driver from loading in the first place?Quote:

dmesg |grep drm
[ 11.481967] [drm] Initialized drm 1.1.0 20060810
[ 11.637941] [drm] MTRR allocation failed. Graphics performance may suffer.

[code]...

View 4 Replies View Related

Fedora :: Can't Dual Booting With Grub (legacy) - Black Screen Grub Error 27

Jul 31, 2011

is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)

so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)

completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27

[Code]...

View 14 Replies View Related

OpenSUSE Install :: Grub Does Not Boot / Just Showing A Black Screen Written 'Grub'?

Feb 26, 2010

I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.

View 9 Replies View Related

Ubuntu :: Stuck On Black Screen With (mouse) Cursor After Grub And A Purple Screen?

Jul 21, 2011

I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition

10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.

Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.

Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.

This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.

Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.

Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.

View 1 Replies View Related

Ubuntu :: Acer Laptop Black Screen On Startup?

Nov 19, 2010

I'm having problems with the screen going black on startup in 10.10. It appears to go completely off (no backlight or anything). If I press ctri+alt+f1 I get a terminal, then I can ctrl+alt+f7 and the desktop appears. I have tried setting the mode to the correct resolution in xorg.conf and I tried using the vesa driver, but it still doesn't work. My graphics card shows as sis 661/741/760

View 5 Replies View Related

Ubuntu :: Infinite Startup Loop - OEM / Black Screen

Apr 18, 2011

I'm doing a dual boot Ubuntu 11.04 and Windows 7 on my Asus UL80v. When I restart and keep going into Ubuntu I'm fine, but I think if I go to Windows and then restart, the infinite start up happens, and I'm currently stuck in this. It'll go to the OEM screen, then a black screen with a cursor, then it goes black, and then back to the OEM screen and so on and so forth.

Luckily I have Ubuntu 10 on my flash drive, so I'm booting to that while I try to figure out this. Which reminds me, when I use the flash drive, there's an option to boot to local disk which also does not work, if that's worth anything. Before this happened, I ran check disk on windows because I ran into some partition troubles. There seemed to be no problems, and I can still access the drives from this flash Ubuntu.

View 1 Replies View Related

Ubuntu Servers :: Black Screen On Startup Most Of The Time?

Aug 4, 2011

I'm having a problem with a server I just got. The first thing I did when I got it was to format the drive and install ubuntu server, but on booting up I got a black screen and my monitor (samsung syncmaster914v) displayed a bouncing notification with the text "not optimum mode recommended mode: 1280 x 1024 60hz". However at one by using a combination of plugging in the monitor after booting, and pressing random keys on the keyboard I was albe to boot into the server, and was able to access the monitor meu, which told me it was running at 640x480, and 60 hertz. having access to the console I stupidly tried changing the resolution and then rebooted, getting the same black screen.

View 2 Replies View Related

Ubuntu :: Black Screen On Startup Then Frozen After Working For Sometime

Dec 10, 2009

Not beeing an expert on Ubuntu, but loving it running on my old Dell Dimension 2400 Series, I do have some issues after the upgrade to 9.10.

1) Frozen screen after a while working with the system. Cursor moves, but frozen
2) Black screen at startup.

Retyping this message again on my Mac Laptop as Ubuntu froze again. I took the following action: Followed directions as listed here [URL]

1. Select recovery mode from the boot menu.
2. Select login as root from the menu in recovery mode.
3. Type this at the prompt
# sudo apt-get remove xorg-driver-fglrx
# sudo dpkg-reconfigure -phigh xserver-xorg
4. Exit
# exit
5. Now select Resume normal boot from the menu.

Every thing should be OK by now. This seemed to work, but after another reboot, black screen again. System Specs: [URL]. Running with 1 GB of Memory and 320Gb Hard Disk /w 2Gb Swap and 318 Gb Extended.

View 4 Replies View Related

Hardware :: Can't See POST On Startup, Black Screen Only?

Mar 19, 2011

I have Windows XP & Fedora 14 on separate hard drives.seem to see POST upon startup. Same for Windows or Linux.

View 14 Replies View Related

General :: Black Screen On Startup After Booting

Mar 7, 2011

I am just new in Linux. Last week I install Linux Fedora12 into my notebook. The problem is sometime it come black screen when we want to start after booting. It also blank screen when want to tab to other properties in system. It is due to graphic card or else which the system used ATI Radeon.

View 1 Replies View Related

Ubuntu :: Just Changed Graphics Resolution In STARTUP MANAGER - Black Screen

Jan 18, 2010

I just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?

the weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptop im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.

View 1 Replies View Related

General :: Get A Black Screen With A White Mouse Pointer At Startup?

Jan 5, 2010

have a problem with an Acer Aspire one running linpus linux. I get a black screen with a white mouse pointer at startup. I don't know how this happened. I can interrupt the startup process with ^c and then see the following amongst other text :Loading x11 FronEnd module...Failed to laod x11 FrontEnd moduleFailed to launch SCIM

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved