I have a headless mythtv running 13, when there's no monitor connected X doesn't start. If I plug a monitor in it still doesn't do my any good as there's no kb/mouse either. I know the system has booted fine as I can connect to myth remotely. This a slackware or x problem? Want to run x11vnc here but without x I can't do that.
View 5 RepliesI have Slackware 13.1 x64 and my graphic card is ATI Radeon HD 2400 on my laptop. I install from ATI official site driver for this card and now when I try to come in System Settings->Desktop I got this error:
Executable: systemsettings PID: 13956 Signal: 11 (Segmentation fault)
Quote:
I'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
I've been using Slackware for ages... since like 1997 or 1998. I have a Slackware 3.x CD around here somewhere. I'm usually the one explaining how Linux works to everyone else. I even got GnuCash working on Slackware. So these two problems ...
1. Keyboard in Xorg. It seems to work, except the down arrow and the page down buttons are mapped as something else (the down arrow causes TEXT TO DISAPPEAR...I've had to type this like three times now...). After a bunch of searches, it looks like a problem with HAL and evdev (whatever that is). I tried setting the model in KDE's Regional control panel but that had no effect.
Xorg.conf settings for this section... you can see some remnants from prior attempts:
I did check that event1 refers to the keyboard. The keyboard is a Microsoft Internet Keyboard that works fine; the arrow keys work great outside of X.
2. Mouse in Xorg. The scroll wheel wants to scroll side to side instead of up and down. This also happens to be a Microsoft product (I like their mice... my wife brought the Microsoft keyboard into the relationship...). It's just a wheel optical 3-button mouse, nothing special. Again, none of my usual xorg.conf edits seem to work; here's what I have right now.
Again, I checked that the mouse is event2.
Someone really should make an upgrade guide for people like me that have been using it for years and aren't really following the tech that explains new features like hal and evdev (I know hal has been around for a couple versions, but I've never gotten involved with it until now). Or maybe there is one and I'm just not aware of it. Basically I just want it to just work, which is why I use Slackware in the first place!
I should mention I did have both working under Slackware 13.1 on this machine until Windows conveniently erased my root partition for me, so I got to do a completely clean Slackware install for the first time in a LONG time. That's when the issue arose. Because I was in a rush, I did a full install. I assume the previous setup was using non-hal/non-evdev methods, but I might as well set this one up using the new methods, right?
I'm using Slackware64 13.1, running on a Core 2 Quad Q8300 @ 2.50 GHz. Hardware is fine - both mouse and keyboard work under Windows XP, and like I said the keyboard is fine outside X. It has to be some configuration problem ...somewhere.
i think the motherboard is cooked but not sure...be4 i call them up and say wtf i want to make sure i have not missed anything (i dont think i have* ok the MO is a MSI g31tm-p21 and the processor is a intel celeron e3300. when i powered it on lights on front panel came on *case has temp readings and fan controls* all of that powered on...the two case fans power on and the processor powers on cd drive powers on and HDD powers on as well so the power box is working there is not a problem with that. i recheck all cabling and its all right i had jumped the cmos a few times now. and with the cmos jumped the M/O would not even TRY to turn on so that was good. it would only turn on when jumped the right away the *keep data* setting took the batt out and waited to let the cmos clear that way. still nothing and i am still getting no post screen. keyboard dos not light up nor dos the mouse
View 6 Replies View RelatedThis just started happening recently on an older install of Linux Mint 9, 32 bit, Gnome with Compiz using a Logitech wireless keyboard and mouse.
I noticed another problem about the same time and I don't know if it is related but now when I restart I get the "default keyring login" pop up message. The keyboard and mouse are unresponsive for at least 60-90 seconds after everything has opened. It only recently started to do this and is not a result of old/slower hardware.
I don't know where to start looking for a cause or what section to post this in.
When I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
View 2 Replies View RelatedWhen I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies View RelatedInstalled 13.1 as a guest in VirtualBox with Debian Lenny 5 64bit as host. The mouse, gpm, and the keyboard work alright at the black screen but in the graphical thing, forget its name.....Xsomething, not KDE, there is no mouse or keyboard; for example the screensaver just goes on and on and nothing will stop it.
View 14 Replies View RelatedSymptoms
- PS/2 mouse works fine under gpm
- PS/2 Keyboard works in console terminal
- Neither Mouse nor Keyboard works under kdm or xdm
- And: #ps aux | grep hal
shows:
82 4259 0.0 0.3 6472 1240 ? Ss Mar10 0:02
/usr/sbin/hald --daemon=yes --use-syslog
but does not show anything like:
root 4298 0.0 0.1 3300 544 ? S Mar10 0:00
hald-addon-input: Listening on /dev/input/event1
- And syslog show: when starting hald with --verbose=yes --use-syslog
Mar 10 20:30:48 darkstar hald[519]: 20:30:48.792 [E] hald.c:124: Cannot
start addon hald-addon-keyboard for udi
/org/freedesktop/Hal/devices/platform_i8042_i8042
_KBD_port_logicaldev_input
Mar 10 20:49:41 darkstar hald[2454]: 20:49:41.651 [E] hald_runner.c:671
: Error running 'hald-addon-keyboard':
org.freedesktop.HalRunner.Failed: Start request failed
- You will find that deleting:
/var/cache/hald/fdi-cache
(and of course: /etc/rc.d/rc.hald restart)
- will allow hald to start the correct module:
/usr/libexec/hald-addon-input
- instead of trying to start a non-existant file:
/usr/libexec/hald-addon-keyboard
My theory is that since hald is the same version in 12.2 and 13.0, had believed that the cache file held valid information, when in fact it did not. I did not think to check the modification date before deleting the file.
I have problem with my Slackware 13.1. When I run system under log in is "user" after 5 minutes system is hung! I can't move mouse and use keyboard! I didn't have this problem when I run system under log in is root. How I can decide this problem ?
View 6 Replies View Relatedrecently i tried to install for the first time and everything booted up fine but when i got to the post install configuration my mouse and keyboard don't work! after that one time whenever i try to load linux it just sits at the boot screen where the colored bar goes left to right and has fedora text in the bottom right corner. i don't know if this matters or not but i'm dual booting with windows XP also i tried using a live cd of fedora 11 it always boots up to the login however just like above i can't use my mouse or keyboard for that one either.
View 8 Replies View RelatedGot myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies View RelatedAfter booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.
View 9 Replies View RelatedI recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
View 2 Replies View RelatedMy screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 Replies View RelatedFor example I'm setting key F1 & F2 keys mouse 1 and mouse 2 click in keyboard..
View 4 Replies View RelatedWell, just as the title of this post says, I am having keyboard and mouse problems. Here's the storyMy friend Cody wanted me to take a look at his computer for him (I'm sort of known as a Linux nerd in my school lol) because his keyboard and mouse do not at all work in init 4 mode. I've tried reconfiguring the keyboard and mouse by trying a different module. I've even tried reconfiguring X alltogether by running "X -configure", which didn't work
View 3 Replies View RelatedI know that by pressing CTRL+SHIFT+NUMLOCK I can use the number pad as a pseudo mouse, but is it possible to force this condition at boot without needing to enter a key press?
(I'm putting a computer in my car running Ubuntu and have decided to do away with both the mouse and keyboard and control it from a joystick on the steering column. This has been wired to the circuit out of an old keyboard to mimic the arrow keys on the numeric keypad.)
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
View 7 Replies View RelatedI (finally!) have Mythtv working under 10.04. I use the Haupaugge DVB-T card with its remote. Whilst setting up the kit this worked OK. When I unplugged the keyboard and mouse the system prior to installing it next to the TV appeared to have stopped responding to the remote. In fact it seems to be responding to a number of the remote keys but not the OK and Go keys which isn't enough to run Mythtv.
I don't think leaving a keyboard & mouse plugged in is going to be domestically acceptable.
Does anyone have any ideas as to how to restore lirc functionality?
I just recently installed Slackware onto a virtual machine(I'm planning on buying a new disc drive and 1 TB HDD with-in the next couple of months and plan on Slackware being my primary OS[right now Mac OS X 10.6 is]), and everything went great.
I then went onto edit the /etc/inittab file in emacs and changed the run-level to 4. I don't know why it's decided that I'd want to boot into KDE when XFCE is installed and in the configuration I selected XFCE but it's not really relevant(I have a WM guide thing open in another tab and will probably be able to change it).
The problem is, as the vague title may suggest, is that it basically freezes when I'm at the log-in screen. The input field for the username is highlighted and blinking, and the cursor it self is visible in the centre of the screen, but it simply doesn't pick up on any input from my keyboard or mouse.
I tried booting up the install CD and logging in as root, mounting sda4(which is the root partition) and editing said file but sudo isn't installed(to my knowledge) on the install disc and when I do the command,
Code:
I've installed SalixOS LXDE and thought it was the best thing but... After I disabled almost all services except syslog, dbus, and hald while inside lxde desktop. I rebooted and my mouse and keyboard no longer worked. So then I booted my Slackware install and edited /etc/inittab on the salix partition so I could boot into init 3 (I kinda like init 3 more than 4 anyway). Booted back into salix and keyboard seems to work but gpm doesn't... Gpm can't find any mouse so I do an lsmod and there's only about 4 modules loaded? Crap... So I dig around /etc/rc.d folder and I think it's got to do with me disabling the udev services when everything was fine after a fresh install...
I ran the init script for udev but it does nothing... I also ran pkgtool and went to setup, selected services and hit enter but it jumps back to the main menu?! I don't know if that's a glitch or what but it won't even let me pick the services with pkgtool... So what can I do to change everything back to their default value? I only booted once into my new salix install, changed services, rebooted, and then problems... I really loved the way everything was working on my first boot. Salix is one of those distro's that really gave me a happy feeling with linux so I'd really hate to stop using it over this one wrong thing I did...
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies View RelatedI installed Fedora 11 on an external usb HDD (StoreJet trascend) connected to my Acer AspireOne (110 L), and it has been working marvelous for over a month. Today, something really strange happened: After I choose the booting media (StoreJet trascend) Fedora 11 freezes on the loggin screen: Both, keyboard and mouse, stop working. I have no idea what services are shoot down or not recognized since the start screen starts with the blue and fedora logo one.
View 5 Replies View RelatedI am running Ubuntu 10.4 and using Virtualbox very intensively to develop under windows. This is the perfect combination: Virtualbox is excellent and gives great speed, functionality and connectability. However, I keep getting a keyboard and mouse 'lock-up' and find that I have to power-down my PC in order to get things working again. The strange thing here is that Ubuntu seems to continue working fine: for example audio keeps playing and the system once successfully finished burning a CD even though keyboard and mouse were frozen.
This happens only very sporadically but is a serious problem because I can't have things freezing when I am in the middle of development or am demoing functionality to a client.At first I thought it was Ubuntu but it only seems to happen when VirtualBox is running so I am wondering whether there is a problem with the keyboard and mouse capture for Virtualbox and that this is causing the problem.I have de-installed and re-installed Virtualbox but this didn't help.So does anyone have a idea how I could either fix this problem or how I could get the system to free the keyboard and mouse when I get a lock-up.
I'm installing slack 13.0 in a Dell 2350 for a friend. once installed, it works ok for a while then within some somewhat random period of time, just plain locks up. the keyboard stops working, the mouse cursor still moves, but there is no response from mouse clicks. i was ssh'ed into the machine one of these times to see if i could read the logs during a lockup. the machine stopped responding to the ssh session as well (actually i had an instance of mc running at the time, and the machine still responded to it. when i exited mc, i was stuck in console never-never land). the logs show absolutely nothing. /etc/messages keeps showing MARK long after the lockup. all other logs are not updated since boot. this machine has an i810 chipset, is there a driver issue here?
View 6 Replies View RelatedI was looking into installing Gnome for Slackware 13.1 due to the instability of KDE and I was able to find GSB [URL]. I ran the simple installation: Code: lynx --source [URL] Everything downloaded and installed so I logged off, ran xwmconfig and set it to gnome and then tried starting my xserver and my screen turns black with a single white dash in the corner. My keyboard doesn't respond (the lock lights won't turn on) and I'm stuck on this black page. I tried changing xwmconfig back to KDE and the same thing happens
View 14 Replies View RelatedI have slackware 13.37-64 bit with xfce. I have a "microsoft wired keyboard 600" keyboard and want to remap it to use the right win key as ctrl. With xev i see that the keycode for the specific win key is 134.
Then i run:
Code:
But nothing changes. Even if i manually configure the .Xmodmap file in my /home i see no change at all.
I use skype, and several times when i have it open, more often when i am using it, the hole system stuck with no response. The mouse stop moving, the keyboard does not work, even control + alt + backspace does not work! The only available choice is to reboot the computer.
View 3 Replies View Related