LibreOffice 3.4 shows up as installed and in my applications menu, but when I try to open it (either through the menu or by opening a file) it shows up with the spinning thing in the task bar but then disappears and never opens.
Did I forget to install part of it?
I'm using opensuse 11.4 kde 4.6. When I (try) to start libreoffice, splash window appears but program doesn't start.
When I launch it from console as normal user i don get any clue, but as root user i got this:
Code:
I run "export $(dbus-launch)" and libreoffice works, but only launching it as root user.
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
I can start libreoffice as root user, but can't start as normal user. Shows error, exception "user" like something, now even that also stopped coming.
View 4 Replies View RelatedHaving installed Libreoffice 3.4 which is supposed to have better integration with Unity I find it doesn't work! I started Libreoffice and clicked "Keep in launcher" which it does for that session it also has quick list, but none of the programs start! They work fine from applications menu but not from Unity.
View 9 Replies View RelatedI want to use LibreOffice but I keep getting an error every time I try to open any office application.
The error is : The application cannot be started. [context="bundled"] caught unexpected exception!
I installed the .debs the first time and thought it might be wiser to install it from the experimental repos.So I reinstalled but there's no difference,I keep getting the error.
I reinstalled and found that the same error is caused by the installation for the dictionaries.I removed those but the error is still present.
I've seen people post this error on some forums except context=user and not bundle.However,it seems those were Windows 7 machines and that it's a 64 bit bug.
I'm also running the 64 bit version.
Also,if I try to install the desktop-integration .debs I get another error ( that is,if I remove the dictionaries,otherwise the installation runs just fine ) :
Suse 11.3 KDE 32bit Following instructions in software.opensuse.org: Search Results I installed LibreOffice using the 1-click Install method. It will not start and produces no error when invoked from the console. Now here's the strangest part. If I left click on an .ods file produced by LibreOffice on another computer (on which it worked) KDE tries to extract it using ark even though file properties identifies it as an "ODS spreadsheet".
View 5 Replies View RelatedI just installed Fedora 12 on my HP laptop. And everthing has gone smooth, and I decided to reboot my machine. And it rebooted and the Fedora Loading logo camep and after it finished, it went to a black screen with a "|" just flashing and it's stuck on that
View 8 Replies View RelatedYesterday I installed Fedora 15 instead of Ubuntu 11.04. I have nvidia card, so I've searched for nvidia driver installing howto and found it on this forum [URL]. But after updating kernel -
Code:
yum update kernel*
(now it's latest - 2.6.39) - and rebooting Fedora didn't start. I even don't know if it's something with GRUB because It automatically loads Fedora and I can't know whether it's its problem. When I try to start Fedora, I just see black screen with blinking underline cursor at the top left of the screen and it's the first and the last I see except laptop splash screen. I have Asus F50SV (Nvidia GT120M). By the way, I've tried to install nvidia drivers manually and xorg.conf became broken. I've edited it and now it like this:
Code:
# RPM Fusion - nvidia-xorg.conf
#
Section "Device"
[code]....
When I boot my Fedora 15 installation it shows me the blue screen with progress indicator, however I do not reach the login screen.Instead I see the textual shell where the last item is:Started Display Manager.It looks like my monitors are not detected anymore. I have been working with them though (this appeared after a restart). I am not sure how I determined it but I read in some log that no display was detected. Nothing changed to the hardware set up however.I see some suggestions to run system-config-display as root.However this command can not be found nor can it be found when I run yum install system-config-display.
View 1 Replies View RelatedI just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.
My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard
I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.
I have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd
the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"
I It does not start when the system boots. The smbd daemon is present and there are no suspicious messages in the system log, dmesg or the samba logs. The nmb service *is* enabled at all of the relevant run levels and does start if I issue the command "service nmb start" as root after I log in. This particular box's networking is 802.11n via a usb port and is under the control of the network manager. I have another fedora 12 box with an internal intel 5100 802.11n card and it does not have this problem.
View 10 Replies View Relatedinstalled vmm, then when i tried mounting i get this error message;Unable to open a connection to the libvirt management daemon.
View 3 Replies View RelatedI'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies View RelatedI did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
I tried to install the newest LibreOffice and was met with the following, I am not sure how to proceed.
LibO_3.3.0rc2_Linux_x86-64_install-rpm_en-US]$ su -c 'yum install *.rpm'
Password:
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
i did a fresh installation of Fedora 15 x64 with Gnome3.
Whenever i start LibreOffice the X server or gdm crashes and i get to the login screen of gdm.
Does Libreoffce have a log file? There are so many Xorg/gdm log files, i don't find anything...
I'm trying to install libreoffice following these instructions URL.. on F14.When I get to the bit 'right click..open with termial' I get stuck because I don't see open with terminal.Please can someone tell me how to open with terminal to complete the installation.I tried using rawhide to get libreoffice but it seems unavailable.
View 4 Replies View RelatedAs root, run this (as Rahul showed below, this is shortest command to do it):
Code:
yum install @office
Another way of doing this is:
Code:
yum groupinstall "Office/Productivity"
Another way of doing this is:
Code:
yum install libreoffice-writer libreoffice-calc libreoffice-impress libreoffice-draw libreoffice-base
Recently I've updated from 13 to 14. However, after updated I've tried to work with my terminal and it seems doesn't works fine. I can read 'starting terminal' but after that it's closed.I've uninstalled and re-installed it through the graphical tools (gnome-terminal) but that doesn't works fine.
View 3 Replies View RelatedI downloaded and burnt the ISO imagw of Fedora 15 onto a CD. I wanted to try Fedora 15 before installing. So, I booted from the CD. However, in the list of Applications, I do not find Libreoffice Suite. Wil I need to download Libreoffice separately after installing Fedora 15?
View 1 Replies View RelatedI am trying to install Fedora 12 from the Live CD to a hard drive that only has a Windows XP partition on it. While I can boot up fine, when I click the "install to hard drive" icon, the program shows in the taskbar for a few seconds, and there's a red light coming from my computer, but the program doesn't launch. The first time I ran it, it did work, but I decided to not install it then. How can I get it to run? Do I have to burn the install CD again?
View 6 Replies View RelatedI use to use Ubuntu and recently came to Fedora, I am not a fan of the package manager in Fedora so I am trying to install things through terminal and when I use Sudo cause that is what I am familiar with this is what it gives me.
Devon is not in the sudoers file. This incident will be reported.
What do I do? I am just trying to install Libreoffice 3.3 and Banshee 2.0
The new release of Opera 10.60 doesn't recognize the -notrayicon option anymore. If you had this option in your menu, then Opera doesn't start anymore and dies silently. You won't get an error message, and this error can keep you quite puzzled.
The solution is to remove the -notrayicon option from the menu entry. In opera, go to opera:conf and find the "notrayicon" option and disable it.
I'm having trouble with my java, I got it to isntall, restarted but when I go to any java based chat, or drawing site it doesn't load the applet, the applet shows up it just says "Start: Applet not initialized"
Did I install it wrong?
I just installed KDE under Arch Linux. Problem is, nothing is starting up right with it - no window manager, no panels, nothing. All I get is a small terminal window in the bottom right corner of the screen, which I'm assuming is konsole. From that single window I can do things like start kwin or launch programs whose names I happen to know (like chromium or firefox), but I don't have a panel for starting programs or switching between programs. Even Alt+F2 doesn't bring up the normal dialog.
It doesn't matter whether I start kdm through inittab or manually by typing # /etc/rc.d/kdm start. KDM looks great, but once I log in as my normal user I just get a console window with no decoration.Is there a startup script for KDE somewhere that needs to run, and usually has a bunch of programs by default - like a window manager, panels, widgets, and all the normal background programs that run in an ordinary GUI? If so, can someone show me the default script so I can work from there with a window manager, decorator, launchers, etc.?
have intalled Debian 8 on bi quad cores opteron, also Tomcat 8 and openjdk7 are installed, i have do a mistake about version eclipse because i have installed eclipse Kepler or the lasted version of eclipse is Luna, after douwload Luna, i have deleted eclipse kepler who was installed in /opt directory, i do the command "tar" for luna version, no problems for instaling, but eclipse luna doesn't work.I try many version of luna like 32bits and 64 bits, but nothing to do the IDE doesn't start.
Code: Select allroot@dct-skyned:/opt/eclipse# ls
about_files configuration eclipse.ini icon.xpm plugins
about.html dropins epl-v10.html notice.html readme
artifacts.xml eclipse features p2
root@dct-skyned:/opt/eclipse# ./eclipse
bash: ./eclipse: Aucun fichier ou dossier de ce type
root@dct-skyned:/opt/eclipse#
I just installed openSUSE 11.4 and after the installation of VirtualBox I coudn't start it. The icon at the cursor kept jumping but no response. I tried to run the binary from Konsole and I got the following message:VirtualBox: supR3HardenedVerifyFileInternal: Failed to open "/usr/lib/virtualbox/VMMR0.r0": No such file or directory (2)I checked YaST to see which packages were installed:
python-virtualbox
virtualbox
virtualbox-guest-kmp-desktop
[code]...