Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I have to use pppoe because my ISP uses service names, and as far as I know the only program which lets me input a service name is pppoe (inside the pppoe.conf file). Networkmanager is buggy because it tends to disappear from the panel periodically and, worse, it doesn't reconnect (although the option is selected, it does reconnect only once).
So, for peace of mind I open a superuser terminal and enter "pppoe-start" and "pppoe-stop" to have everything I want (reconnects automatically, etc.). Now the question is: how can I have pppoe-start run at startup, automatically, without entering superuser mode, and without having a terminal open for this? Using Debian Testing (Wheezy).
I have installed Oracle 11g on 5.3. Now, I am trying to START and STOP oracle automatically on system startup and shutdown. I am following this link To have this effect, I have created /etc/init.d/dbora
Code:
#!/bin/sh
# chkconfig: 345 99 10
ORA_HOME=/oracle/app/oracle/product/11.1.0/db_1
[code]....
I'd like Synergy to auto-start before and after login. After login is fine, but I can't find instructions for getting it to start before login (ie: so I can use synergy to enter user id/password). The Synergy docs don't cover LXDE.
View 5 Replies View RelatedI use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
When ever I reboot my server I always turn on the squid service. Is there any way that without giving command
Code:
#service squid start
my squid service should automatically start ?
I have installed FreeRadius to a Debian Linux server.I have configured an account called Support to run the Radius as I didn't want Root to be the user to run this.I want Radius to start up automatically after the system is rebooted but I don't know how to do this. I am new to Linux so please bare with me. If the system is rebooted, is it possible for the Support account to be logged in automatically? Is there a script I can create to automatically login the Support account? This may not be secure but it has been requested. Also the main question is after a reboot can the Radius be configured to automatically start without the need for someone to login? So if the system is rebooted and then goes back to login prompt, can the Radius then be running?
I have had a good search about scripts but with my limited knowledge it isn't too easy.
After reading it also said something about using rc.radiusd which will automatically start Radius after a reboot, but again I cannot understand exactly what I need to do.Please can someone help out with this and let me know if I am on the right track? Will the start-my-radius.sh script work after the system is rebooted without someone actually login and how do I get it to work?Please explain clearly as this is all a bit technical for my liking and not understanding it well!
Ok, so I have installed apache 22, mysql5.0 and proftpd1.3. When I reboot my server, the above applications do not start up automatically, and I have been trying to figure out how with out much success. know that I need to make some changes inside the init.d directory on my CentOS Server.I am running CentOS 5.4 x86_64 build.I really am not sure how to accomplish the task or where to start.
View 4 Replies View RelatedI am still pretty green when it comes to centos and linux in general. I have installed rpm and source packages before with little trouble by following the guides available on the support site and wiki for centos.I am running centos 5.4 on a virtual server.I followed the guide for installing vpopmail at URL...mailSince this is a VPS server I cannot install gnome and is why I opted for vpopmail + qmail.
The first issue I have is: I don't know how to tell qmail to start up automatically because after the install of qmail from source as the guide told me to, it did not place a startup files in the /etc/init.d, and I can't find any useful documentation on how to trouble shoot that.I try to use "chkconfig qmail on" and "chkconfig --level 345 qmail on" but both give me the error "error reading information on service qmail: No such file or directory"The version of qmail I am using is the latest 1.0.3, and the version of vpopmail is 5.5.
Vpopmail seems to be working just fine, as is the mysqlauth mod. I check the vpopmail database in mysql, and all the values I used for the domain and user show up there.The settings also show in the qmail configuration directory files for the domain.My first clue as to something being wrong was that when I send an email to the address I setup, I get nothing delivered on the server, but I also do not get any bounce backs or errors to tell me the details of what went wrong.At first I figured it was my firewall, so I disabled iptables.That did not fix it.I also tried disabling SElinux. That also made no difference.
how to start automatically vsftpd in my server after reboot?
View 5 Replies View RelatedMy problem now is that lsyncd does not automatically start if the server reboots. I need lsyncd to start automatically also using the --delay 5 option.
I've had trouble finding any info on this other that some Japanese sites (I cant read japanese) using chkconfig, although it didn't work as I think chkconfig is depreciated anyway.
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedI'm wondering how I start it automatically when I boot up the ubuntu 10.04? especially, when I created the user "postgres", I set a password to it. every time I issued "su - postgres" command, I need to give it a password.
View 2 Replies View RelatedI have configured heartbeat+DRBD on a SLES10 SP3 cluster and that's working fine except when both nodes are down and I turn on only one node. When this happens, the heartbeat don't starts automatically (the service status says it's unused, so the services, IP address and partition don't start automatically too).
I can turn on the heartbeat manually (service heartbeat start) and get the services, ip address and partition initialized too, but I'd like to make it starts automatically because it's possible to have one node broken and the person that will turn on the other node can forget to manually starts the service.
-When the heartbeat is unused on the first node and I turn on the second node, the heartbeat on the first node starts automatically and everything is fine.
-The command "chkconfig heartbeat on" was executed.
how to setup shoutcast to automatically start when i start my server?
i have installed it on /root/shoutcast ; configuration file /root/shoutcast/shoutcast_config
I installed apache 2.2 with centos 5.5. When I typed service httpd stop, apache stopped. Then in a minute, it automatic start again. I don't use crontab, and I tried 'chkconfig httpd off', but it still automatic start. I used 'ps -ef' to look process, I saw, httpd have PPID is 1, and then I find PID 1 have PPID 0.
View 1 Replies View RelatedI have a problem with running Apache web server. I think my problem is either I can not get httpd to load automatically or it's being blocked from external unless I'm logged in, don't know which. Or, I'm completely off base. Either way, being logged in solves the problem. Now I just need to fix it. This is a brand new server running latest apache and fedora 10 (all fully patched). Loaded from source to all default (non RPM directories - apache is /usr/local/apache2/... )
I modified the existing /etc/init.d/httpd script and had it point to the /usr/local/apache2 areas.I even did a chkconfig --add httpd and show it is on for run levels 2345.The problem is that when I reboot the server httpd does not load because I can not access the website.However, the minute I login to the server as a user (non-root) it automatically loads httpd and the website works.Then, when I logout, everything is inaccessible again. I even tried to put the commands in the /etc/rc.local script (or wherever it is).Same thing happens.I know this is a simple fix. Just don't know what it is. Is it related to SElinux? However, wouldn't SElinux create access problems regardless of being logged in or not? Once I'm logged in, everything automatically fixes itself (either it's a service load or a rights filter fix).
Remember, everything works perfectly as long as I'm logged in to the server (even as a non-root user). Just the act of logging in makes the web server accessible from to the rest of the world. However, when I logout, the web server is inaccessible.
I installed and configured mysql 5.0 on my opensuse 11.1 box. But I have no idea how to get it to start automatically when the server reboots.
View 3 Replies View RelatedI install lirc and want to prgram irxevent start automatic when the system start
Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.
I am setting up a CentOS server that has no screen connected, and only has 2 Tesla cards. I have created a minimal xorg.conf and xinitrc file that doesn't load mouse or keyboard, and only creates two screens, one for each card at 320x200x24 bit. This is so I don't waste VRAM on a framebuffer I can't see.
I modified the xinitrc to just load tdm and nothing else as GNOME is a RAM hog. I am then using this setup to render stuff offscreen using OpenGL into FBOs which I read back to CPU and process. Currently for development I just run startx& when I login. I now want to know how to set x server to start automatically at boot. The CentOS docs say that it will try to load the GNOME login manager. The thing is that I don't want a login manager as it is useless as I login remotely via SSH.So:
1 - how to enable automatic x server in CentOS (im used to Ubuntu so not sure how to do this on Red Hat variants)
2 - leave x server running without starting login manager
after installing Debian, I typed the command:
Quote:
update-rc.d -f exim4 remove
to avoid automatic start of this mail server (I use qmail). After several months, I did a reboot and exim is started! Looking at the history, I found this command:
Quote: dpkg-reconfigure exim4-config
Maybe this command has restored the init script of exim?
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies View RelatedI have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
I'm new to this linux.I installed "fedora 14" on my desktop.I just changeed text mode.(etc/inttab -> id:3:initdefaultSo, when my pc powers on, I want automatically start "vi" program.
View 6 Replies View RelatedI upgraded to 10.04 and my AWN dock won't automatically start even though the 'box' is tic'd and it's showing in the Startup Applications. I did lose all of my configurations as well after upgrading and had to reinstall everything on the dock.
Also, there are little numbers on the launchers like for Trash and Email that tell me how many items are in there. The Trash was easy to remove the numbers by right clicking and choosing the Preferences option. There was a place to disable that but there isn't one for the Email and those little numbers look well.
After restart or suspend/resume the Wifi won't start until I click on my home network from the menu. It used to start without me doing anything (once I setup the wireless).
View 1 Replies View RelatedAfter installing some updates recently, 10.10 boots into a command line. I have to type sudo gdm to get into Gnome, at which point it works fine. How can I make it start Gnome automatically again?
View 2 Replies View RelatedI use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies View Related