Fedora Networking :: USB Modem Not Connecting In FC11 X64?
Jan 23, 2010
The problem is that when I connect my phone to my machine FC11 x64 via USB and use the phone as a modem NetworkManager does not recognise the phone as a modem. The phone works well on my laptop which is FC11 32bit system, NetworkManager detects it and sets it up as eth2 and away I go, no problems at all. I would like to ask the community how can I go fault finding to find out why it does not work. #lsusb shows that the modem is being detected by the system but beyond this I don't know where to look and get things going.
View 1 Replies
ADVERTISEMENT
Jun 15, 2009
Fresh install of FC11. Had to install libwvstreams-4.5.1-5.fc11.i586.rpm and wvdial-1.60-8.fc11.i586.rpm
Now get following error -
View 6 Replies
View Related
Aug 9, 2009
i want to ask a question. sometimes i use a gprs modem to connect to the net. the gprs modem uses the usb port. i've connected this pc to another machine through crossover cable. the problem is that when there are two active connections, firefox can't load anything. also how can i share the gprs modem with my other pc that is connected via crossover?
PS. in my active network connections it shows:
eth0- the NIC
and auto eth1 - the gprs modem
i have also tried to change the firefox preferences but to no avail.
Both my computers run on FC11.
View 1 Replies
View Related
Jan 18, 2011
I am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies
View Related
Jun 23, 2010
I am using ububntu 9.10,and have a cable modem internet connection. All I have is an ethernet cable given to me,and when plugged in a windows machine and fire a browser am redirected to default login page where i can login, but when i plug it into my linux machine,i cant get the same done. In network connections it doesnt shows my autoeth0, i have deleted my existing dsl settings(not autoeth0),made a new wired network,i doubt what should i put into MAC addrs field(i have put my machines mac given by lshw -c network.) What should I put in DHCP client id? Anyways when i click on network connections it says under my wired connections-device not configured properly.
View 6 Replies
View Related
Jul 14, 2010
In my attempt to get my USB 3G modem to work on Ubuntu 10.04 netbook edition I have made some progress to the point of getting the driver for it up and running, though connecting to the Internet after defining a profile is an issue. I have followed this ubuntuforums thread simply to get started with the usb modeswitch to get the usb modem identified by the system.
Debug information:
uname -r:
Code:
2.6.32-23-generic
cat /etc/issue:
[code]...
View 6 Replies
View Related
May 22, 2011
I've recently installed Natty and the only problem I have with it so far is attempting to connect my Huawei E5830 Three Wireless modem via USB and successfully connecting to the Internet from it. I've fiddled around with the network settings and nothing, I've also done some work in the Terminal to try and correct the problem.
View 1 Replies
View Related
Apr 25, 2009
I was recently asked to get a 3G ZTE 633 modem (not in stores) to connect to the internet whenever it was plugged in. I had it successfully working on my Ubuntu Gutsy Gibbon machine but it does not work on Fedora 10 which is where it is required to work. When the 3G modem is plugged in I use a Udev rule to run usb_modeswitch which changes it from being in usb storage mode to being in modem mode. This part works fine. I then run a second udev rule (on the modem device), this should run a script which connects to the internet. Unfortunately it falls over here. The script does run but it will not connect. However if I run the script manually from root it works fine. I guess that it is a permissions issue.
The device permissions are:
crw-rw---- 1 root uucp 188, 0 2009-04-26 11:31 ttyUSB0
crw-rw---- 1 root uucp 188, 1 2009-04-26 11:31 ttyUSB1
crw-rw---- 1 root uucp 188, 2 2009-04-26 11:31 ttyUSB2
The script and script folders permissions are:
drwxrwxrwx 2 root root 4.0K 2009-04-26 11:46 .
drwxr-xr-x 23 root root 4.0K 2009-04-26 11:13 ..
-rwxr-xr-x 1 root root 95 2009-04-26 11:46 run_internet
One thing to note is that there are three udev devices associated with the modem. They are ttyUSB0, ttyUSB1 and ttyUSB2. I use ttyUSB2 to talk to the modem when connecting. Here are the files. If you require any more let me know:
The first udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="2000", SYSFS{idVendor}=="19d2", RUN+="/usr/bin/usb_modeswitch"
The second udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="0031", SYSFS{idVendor}=="19d2", MODE="0666", RUN+="/outputs/run_internet"
The script:
#!/bin/bash
/bin/echo script
/usr/bin/wvdial &
cp -f /etc/telstra_resolv.conf /etc/resolv.conf
The wvdial config file:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = ATS7=60 S30=0 S0=0
Init4 = AT+CGDCONT=1,"IP","telstra.internet"
Modem Type = Analog Modem
Baud = 9600
New PPPD = no
Modem = /dev/ttyUSB2
ISDN = 0
Dial Command=ATD
Phone = *99#
Password = user@bigpond.com
Username = password
Stupid Mode = 1
So what am I missing? I suppose it is related to device permissions. Why does the "mode" command not work? With what rights do udev rules run?
View 1 Replies
View Related
Apr 3, 2010
running Ubuntu 9.10 x64bit fresh install and updated.When I connect with my 3g um150 modem it disconnects my home network?? I cannot get them to run both at the same time and of cousre the next thing would be to share the internet connection.
View 9 Replies
View Related
May 29, 2010
I use Banglalion WiMax usb dongle modem. I like to use it in ubuntu os. When I connect it to my Desktop PC's usb port, it respond nothing.
View 9 Replies
View Related
Jul 22, 2011
I have a USB Modem MMX 372 G to connect internet lsusb showsCode: Bus 002 Device 002: ID 05c6:9000 Qualcomm, Inc.and following is /var/log/messages when I connect the USB modem and connect it for the first time the USB modem Quote:
Jul 24 08:37:42 bond kernel: [ 110.200159] usb 2-2: new high speed USB device using ehci_hcd and address 2
Jul 24 08:37:43 bond kernel: [ 110.353219] usb 2-2: configuration #1 chosen from 1 choice
[code]....
View 1 Replies
View Related
Apr 11, 2011
trying to connect to the internet using wvdial but facing problems. the command runs fine until i get PID ppd Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Oct 23 10:40:09 2010
--> Pid of pppd: 2520
nothing happens after this.. I checked the resolve.conf and it is empty. i put openDNS server addresses but still did not work.
View 3 Replies
View Related
Mar 9, 2010
I have just installed ubuntu 7.10 on my computer. The problem is getting it connected to the internet using my Sony Ericsson w580i as a modem. I have used my phone to connect to the internet on XP operating system easily. Please assist me and try to give me a more simplified step by step procedure.
View 9 Replies
View Related
Aug 6, 2010
i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
View 2 Replies
View Related
Feb 17, 2011
sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies
View Related
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Jun 26, 2010
I've got a sitecom usb wireless adapter that uses the RT2870 chipset.I have got the rt2870sta module and have a ra0 interfaceI can set up a connection in the network tool and it recognises the usb device fine.
[root@genie devices]# iwconfig
ra0 RT2870 Wireless ESSID:"******" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have no control over it and the wireless bit in Network Manager is greyed out. I got the firmware from the Ralink site
/lib/firmware/rt2870.bin
I have set the country code in the .dat file to 1 for channels 1-13 and selected channel 11 My netgear wg-614 wireless light has no activity.
View 2 Replies
View Related
Jun 18, 2009
Probably there is bug in kernel used FC11 [url] This bug freeze computer after ping or other data sending over VPN connection.
Is there any chance to backport this patch to kernel in FC11?
More about this in topic:[url]
View 14 Replies
View Related
Jun 23, 2009
Since I installed FC11 vpnc stop working. I get "vpnc: no response from target." I tried running it with "strace" and the reason is a timeout: poll([{fd=3, events=POLLIN}], 1, 4000) = 0 (Timeout)
I tried google and adding "NAT Traversal Mode cisco-udp" to the config file works for some people but not for me Does anyone had experience with vpnc 0.5.3 in FC11?
View 3 Replies
View Related
Jul 11, 2009
Trying to set up a modem connection under FC11, using the applet under System/Administration/Network/Add gives the following error:
Code:
Local variables in innermost frame: If the script is faulty, could you guide me through setting it up by hand? I am required to be away from my normal location for a few weeks starting Monday and need to keep in touch.
View 2 Replies
View Related
Jul 15, 2009
I can't get my Broadcoam BCM4322 to connect to a protected access point. I've tried the drivers from rpmfusion, and tried to build the module with the source+binary package from Broadcom, all with no luck. The failure seems to happen during the WPA negotiation.
I haven't tried connecting to an unsecured WiFi access point.
When booting this same laptop to Kubuntu 9.04, it can connect to secured, so it is possible under linux.
Here's output from lspci, and the tail of the log while KNetworkManager is trying to connect the device.
lspci | grep -i network
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
[Code]....
View 3 Replies
View Related
Aug 13, 2009
I'm trying to install my pci wireless card that uses bcm4318 technology. I installed ndiswrapper and the driver for the card. However, I still can't seem to get wirelessworking. I'm not sure what info you will need to help me diagnose this problem. Here is the output of ndiswrapper -l:
rt2860: driver installed
View 4 Replies
View Related
Oct 27, 2009
I know theres a thread for this for fc9 but thats probably kind of outdated now. So I am trying to set up a wireless connection for a pc in my bedroom and just want something that will work out of the box.
View 2 Replies
View Related
Jun 10, 2009
On FC10, when system boots up, it would auto detect (from DHCP) and configure eth0.
This does not happen on FC11, but I can manually configure the interface. The entries in /etc/sysconfig/network-scripts/ifcfg-eth0 are identical on both OS releases.
Don't know if this is related, but when I run System->Administration->Bootloader, it fails system-config-boot - missing module kudzu.
View 5 Replies
View Related
Jun 13, 2009
I have a problem with Netgear Wireless WG311v3 card and it is not listed in "ifconfig -a". Network Manager does not see the Netgear card either, just eth0 the onboard wired NIC. Here is the result of lspci.
Code:
[root@mylinux ~]# lspci -nn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2)
[Code]......
View 4 Replies
View Related
Aug 28, 2009
Finally, my mobile broadband is native to Fedora. Just finished clean install of FC11 and it found the device, started it, and it works, just like it did in WIndows. ZeroConfig FTW! Great job Fedora team on this. FC10 it didn't work at all and FC6, 7, and 8 it took a lot of tinkering to make it fully functional.Also, NM is working MUCH better now with static IPs over the previous FC10 version. Set it up first run and had no issues with running my laptop on the network.
View 6 Replies
View Related
Sep 23, 2009
A few days ago (september 7) my wireless suddenly stopped working. I am using FC11, and have an Atheros AR5211 wireless card and have been using the ath5k driver with GNOME NetworkManager. Wireless networks are detected by NM perfectly fine. When I try to connect, the icon spins around those two dots, and one of them becomes green. If the network is wep protected, it asks for the password. After a while, it times out, regardless of the protection. I don't remember changing pretty much for the last two months, so I'm sort of surprised. I did download and install a kernal, along with an selinux-policy update.
If I run dmesg, relevant looking lines included:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
and a long series of these at the end:
wlan0: direct probe to AP 00:0b:86:4f:8a:20 try 1
wlan0: direct probe to AP 00:0b:86:4f:8a:20 try 1
[code]....
Note: I previously posted this in "Laptops," but Networking seemed like a better place to do it.
View 14 Replies
View Related
Jan 12, 2010
I have a Broadcom wireless card in my hp dv6500z laptop, I had it all working properly in FC9 thanks to bbfuller and his post on the subject. After I upgraded to FC11 I have been unable to get it to connect.
I can see my neighbor's sites and suppose I could see my own if the SSID was allowed to broadcast but I keep that turned off. I put in all of the setting, including the network security key, but it won't connect, then when I go back and look again, the security key is not even close to what I put in; it gets changed to a huge string of characters.
I redownloaded broadcom-wl-4.150.10.5.tar.bz2.tar and followed the instruction on the post once again but no luck, which, after I thought about it, was a waste of time because if I can see other's wireless, then the card must be working. I have tried using Network Manager and not using Network Manager and still no luck...
View 6 Replies
View Related
Apr 21, 2010
I'm trying a long time to configure my 3g modem to connect.I had tryied using the KDE Network manager and the modem stay in "Waiting authorization" for ever ^^.The KDE Network manager runs ok in Kubuntu.I had tryied download and install kppp, but kppp don't open my modem (/dev/ttyUSB01)Then how can I configure my modem?
View 1 Replies
View Related
Jun 15, 2011
I've Reliance Broadband internet modem . very first time only it was connected but next onwards it's not connecting , I am trying last one month to connect internet , I am tired .I had seen lot of thread related to this problem but it's not connecting, my device is identified by network manager and i entered user name and password ,connecting process is going on but finally it's not connecting . i installed wv dial and usb modeswith data
View 3 Replies
View Related
