Fedora Networking :: Netgear WG311v3 FC11 - Card Not Being Detected
Jun 13, 2009
I have a problem with Netgear Wireless WG311v3 card and it is not listed in "ifconfig -a". Network Manager does not see the Netgear card either, just eth0 the onboard wired NIC. Here is the result of lspci.
Code:
[root@mylinux ~]# lspci -nn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2)
[Code]......
View 4 Replies
ADVERTISEMENT
Feb 2, 2010
I have been searching through these forums the past couple of day as I have just installed Ubuntu 9.10 64bit on my custom whitebox. I have had windows 7 on it in the past, but want something different now.
I guess my main question is if anyone knows a simple to install wireless card (pci or usb) for ubuntu 9.10 64. I currently have the Netgear WG311V3 PCI card installed, but I can not for the life of me get it to work under Ubuntu. I have tried numerous different methods from search google, these posts, etc. but I can not get any of them to work.
View 2 Replies
View Related
May 18, 2011
I already have a wifi card- the netgear wg311v3. that had almost NO linux compatibility, so I won't make the mistake of buying any old wifi card again. What I want to know is, what's a good wifi card for Linux. Here are some requirements I have for it:
Preferably 802.11n support, but I could settle for "G" Out of the box support. As in, I don't have to use Ndiswrapper. Just pop it in, and let ubuntu do the rest I would prefer a USB based dongle, but PCI would be good too. I don't have any brand preferece.
View 2 Replies
View Related
Nov 17, 2010
i have installed ubuntu 10.04 1st time. i have wg311v3 netgear adapter card. install it on ubuntu
View 1 Replies
View Related
Mar 13, 2011
This installed my Netgear WG311v3 Wi-Fi card on this machine using Fedora 14 x86_64 it took me a while to do so in the future I can (hopefully) follow this guide myself in the future and for anyone who is having problems. First thing you need to do is make sure your system and kernel is up-to-date:
Code:
su yum update next you need to make sure that the kernel headers are installed so you can compile ndiswrapper (which is no longer available on FreshRPMs) and GCC as well as svn to get the latest build of ndiswrapper:
Code:
su yum install kernel-headers gcc svn Now we need to get the latest build of ndiswrapper to make and install it; make sure you do this outside of root:
[Code]...
View 2 Replies
View Related
Feb 14, 2011
I've gone through tutorial after tutorial and finally I've given up and I'm resorting to asking the forums. I've got Slackware 13.1 64-bit and I've got a Netgear WG311v3 and I obviously want them to work together! I installed ndiswrapper and I've tried several different drivers from several different tutorials, but I can't get them to work. At first I couldn't get modprobe ndiswrapper to work, but that was because ndiswrapper.ko was in the wrong folder. I moved it manually and executed depmod -a and modprobe ndiswrapper started working.I've gathered all the information I anticipated and I'm going to post it at the end of this. Anything I don't supply that is relevant ask for and I'll try and get it. I'm desperate to get this driver working correctly so I can get back to my life on Slackware. Here's the information:
[Code]...
View 3 Replies
View Related
Feb 12, 2011
I'm having trouble installing my wireless card drivers. I've read a lot on this using Ndiswrapper to install my drivers but when I go to install I get this.
linux-8h6g:/wg311 # ndiswrapper -i wg311v3.inf couldn't open wg311v3.inf: No such file or directory at /usr/sbin/ndiswrapper line 219.
I'm giving the right path to the inf file tried moving to other folders and still nothing.
View 9 Replies
View Related
May 10, 2010
i installed ndiswrapper and ndisgtk, then using my thumb drive installed my .inf file (tried in the terminal as well as ndisgtk and both worked succesfully). when i run "sudo ndiswrapper -l" my wn311b device is shown, and the chipset to be working properly. now when i run "iwconfig", Wlan0 is not listed. also i blacklisted the drivers "b43, b43legacy, ssb, and bcm43xx", could this be the issue? im running the newest build of ubuntu which i installed today on this computer for a dual boot drive with vista.
View 5 Replies
View Related
Dec 17, 2010
I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
View 14 Replies
View Related
Jan 13, 2011
I have installed Fedora 14 on my new laptop Thinkpad T410 but the wireless card is not detected.
I tried to install the drivers but got error. How to install the driver.
[root@sheril sheril]# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) .....
View 1 Replies
View Related
Mar 14, 2011
System: HP Vectra VL Ubuntu Version: 8.10,
lsusb Bus 001 Device 003: ID 0846:9020 NetGear, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub,iwconfig lo no wireless extensions.
[Code]...
View 3 Replies
View Related
Mar 7, 2009
I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies
View Related
Jun 27, 2010
I have a dual boot with W'XP and RHEL 5. M/B is MSI.
In XP the LAN is detected but not in LINUX.
View 2 Replies
View Related
Aug 27, 2010
I added to my machine PC running debian and others, ubuntu, pc wireless card:,the same card I used it on other machine, it ran nice.On the other machine i have Ethernet Controller instead of Class ffff.I installed the divers firmware-ralink and other realtek and network-manager, but nothing.on other machine, that was enough to run it correctly.and ifconfig dosn't give wlan0,iwconfig did't give characteristic of wlan0.does this mean that the bios didn't recognize it as a network card
View 3 Replies
View Related
Apr 4, 2010
I have bought a new laptop with W7 installed. And I installed dual boot with Ubuntu 9.10 on it.I tried to connect my laptop to Internet by Ethernet port. It works with W7, but Ubuntu doesn't detect my Network card .After some research on Internet, I suppose that it's a problem of drivers for this card.Here some parameters I could get :
>ifconfig :
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
[code]...
View 4 Replies
View Related
Apr 30, 2010
I have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
View 9 Replies
View Related
Jun 16, 2010
I'm in serious need of some help. The network adapter on the motherboard of my main machine apparently failed about noon today. This machine serves as the firewall and router for my home office LAN, and so it has two network adapters, the second being a PCI card installed in the only PCI slot of the mobo. The mobo's adapter served the WAN while the PCI card serves the LAN.Since the mobo has only one PCI slot, none of the other PCI cards I have on hand could be used. Instead, I pulled an unused PCI-e dialup modem card from the machine, and bought a PCI express gigabit card to put in its place.
The problem is that the machine (running Hardy 8.04.4 LTS) does not recognize the new card at all. Running lspci shows only the old PCI card that serves the LAN. Similarly, running "sudo lshw" shows only the old PCI card together with a virtual adapter that's part of my VirtualBox installation on that system.I then dual-booted into Vista Home and attempted to install the new card there, using the CD that came with it. Vista detected the card and asked for the disk, but then was unable to find any drivers on the disk!The box says the card is from Star Tech, and the instruction sheet says its model is ST1000SPEX.If anyone can point me to the correct module to add to the startup list and/or remove from the blacklist, that may get me going again.
View 3 Replies
View Related
Dec 3, 2010
I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..
View 2 Replies
View Related
Jun 18, 2011
I bought a new TOSHIBA C660 - i5010 today and installed.Lucid Lynx 10.04 on it, but it has not detected my wirelessg broadcom 80211 (STA) driver debp interface.
View 1 Replies
View Related
Mar 1, 2010
im having some trouble connecting the wireless card to my wifi network, theres is a hint using the terminal
remora@remora-laptop:~$ sudo lshw -C network
[sudo] password for remora:
*-network DISABLED
description: Wireless interface
[code]....
View 6 Replies
View Related
Aug 27, 2010
I have a Realtek gigabit onboard ethernet (RTL-8110SC/8169SC)It was working in 9.10.After upgrading to 10.04, the connection dropped to 10MB. Now, lspci -v shows the card, but Ubuntu no longer recognizes eth0!I have no connection on the machine. I've been digging around the forums, but can't seem to find what I need.
View 2 Replies
View Related
May 7, 2010
I started on ubuntu 8.10 and my wireless card has always worked,Since i did a fresh install of ubuntu 10.04 it still seems to work to a point.I can see networks, click them and use a password to connect but it never seems to carry on, I typed the password correctly and after a minute it asks for it again.I have read a post about problems other people are having and that i need to install a different program.But i cant install another program if there is no wireless as apt-get doesn't work without internet connection.So... I need to download something that will fix it (possible update if one has been released) to xp (partition) then access xp partition from ubuntu and install it.
View 9 Replies
View Related
Oct 20, 2010
I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit
View 2 Replies
View Related
Jul 21, 2011
I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?
View 3 Replies
View Related
Apr 7, 2011
I want to load Atheros wireless card to ubuntu linux OS having kernel 2.6.32.21. I have loaded the atheros driver and I observed the following log messages when card was inserted.
[ 55.732223] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 55.732294] pci 0000:04:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 55.810152] ath5k: disagrees about version of symbol ieee80211_free_hw
[code]....
My suspect was the driver was 2.6.35.1 kernel based i may need to update my kernel, but i have other laptop having 2.6.32-21 kernel and this card works fine.
View 2 Replies
View Related
Jan 26, 2011
I am running the latest version of arch linux on a Dell Latitude D420. So far everything has worked perfectly except the wireless. It seems that Arch does not even detect the wireless because ifconfig -a only gives me the loopback and eth0. I installed ndiswrapper as well as the drivers. lsmod | grep ndiswrapper shows that ndiswrapper is being loaded on boot. I tried to install the iwp3945 drivers, but they have become obsolete so pacman was unable to find them. I also tried installing the iwl3945 drivers as explained here [URL] but still no luck.
View 14 Replies
View Related
Sep 6, 2009
I used the following guides to try and get my Netgear WG511 PCMCIA card going:
[URL]
I also made a post about it here: [URL]. As the problem doesn't appear to be ndiswrapper itself I've made this separate post.
Unfortunately, I still end up having wlan0 attempting to connect, prompting for my password, trying to connect then prompting for my password (ad infinitum).
I changed my network security from WPA to WEP and now my card works fine. why this might be happening (i.e. why WEP works but WPA doesn't?)
View 2 Replies
View Related
Jul 5, 2010
I searched this forum for posts similar to the problem I am having and i found a few, but I did not understand the solution (unexperienced user here) so I thought i would ask.I recently installed fedora 13 on my laptop and everything appears to be detected, with the exception to my wireless card (a broadcom 43225 card).I checked the list of drivers that came with installation and i could not find one for this particular card. is there any way for me to get a driver that would work with it (maybe a more general driver, just something to make it possible to connect over the internet) Or is it
View 7 Replies
View Related
May 31, 2011
i have newly bought Desktop system with the following configuration:
1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb
i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.
View 4 Replies
View Related
May 20, 2010
My network cards were fine under Wubi Lynx. I decided to upgrade to Ubuntu Studio Lynx on its own partition, and the DVD install routine failed to detect the network card. Where do I go from here?***1 ) Machine Brand and Model (PC/Laptop):Acer 1410 (dual amd64 netbook, about a year old)***2) Network Interfaces
>lspci
01:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)
02:00.0 Network controller: Intel Corporation WiFi Link 1000 Series
[code]....
View 3 Replies
View Related
