I've recently installed Natty and the only problem I have with it so far is attempting to connect my Huawei E5830 Three Wireless modem via USB and successfully connecting to the Internet from it. I've fiddled around with the network settings and nothing, I've also done some work in the Terminal to try and correct the problem.
View 1 Repliesi'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
I am using ububntu 9.10,and have a cable modem internet connection. All I have is an ethernet cable given to me,and when plugged in a windows machine and fire a browser am redirected to default login page where i can login, but when i plug it into my linux machine,i cant get the same done. In network connections it doesnt shows my autoeth0, i have deleted my existing dsl settings(not autoeth0),made a new wired network,i doubt what should i put into MAC addrs field(i have put my machines mac given by lshw -c network.) What should I put in DHCP client id? Anyways when i click on network connections it says under my wired connections-device not configured properly.
View 6 Replies View RelatedIn my attempt to get my USB 3G modem to work on Ubuntu 10.04 netbook edition I have made some progress to the point of getting the driver for it up and running, though connecting to the Internet after defining a profile is an issue. I have followed this ubuntuforums thread simply to get started with the usb modeswitch to get the usb modem identified by the system.
Debug information:
uname -r:
Code:
2.6.32-23-generic
cat /etc/issue:
[code]...
running Ubuntu 9.10 x64bit fresh install and updated.When I connect with my 3g um150 modem it disconnects my home network?? I cannot get them to run both at the same time and of cousre the next thing would be to share the internet connection.
View 9 Replies View RelatedI use Banglalion WiMax usb dongle modem. I like to use it in ubuntu os. When I connect it to my Desktop PC's usb port, it respond nothing.
View 9 Replies View RelatedI have a USB Modem MMX 372 G to connect internet lsusb showsCode: Bus 002 Device 002: ID 05c6:9000 Qualcomm, Inc.and following is /var/log/messages when I connect the USB modem and connect it for the first time the USB modem Quote:
Jul 24 08:37:42 bond kernel: [ 110.200159] usb 2-2: new high speed USB device using ehci_hcd and address 2
Jul 24 08:37:43 bond kernel: [ 110.353219] usb 2-2: configuration #1 chosen from 1 choice
[code]....
The problem is that when I connect my phone to my machine FC11 x64 via USB and use the phone as a modem NetworkManager does not recognise the phone as a modem. The phone works well on my laptop which is FC11 32bit system, NetworkManager detects it and sets it up as eth2 and away I go, no problems at all. I would like to ask the community how can I go fault finding to find out why it does not work. #lsusb shows that the modem is being detected by the system but beyond this I don't know where to look and get things going.
View 1 Replies View RelatedI was recently asked to get a 3G ZTE 633 modem (not in stores) to connect to the internet whenever it was plugged in. I had it successfully working on my Ubuntu Gutsy Gibbon machine but it does not work on Fedora 10 which is where it is required to work. When the 3G modem is plugged in I use a Udev rule to run usb_modeswitch which changes it from being in usb storage mode to being in modem mode. This part works fine. I then run a second udev rule (on the modem device), this should run a script which connects to the internet. Unfortunately it falls over here. The script does run but it will not connect. However if I run the script manually from root it works fine. I guess that it is a permissions issue.
The device permissions are:
crw-rw---- 1 root uucp 188, 0 2009-04-26 11:31 ttyUSB0
crw-rw---- 1 root uucp 188, 1 2009-04-26 11:31 ttyUSB1
crw-rw---- 1 root uucp 188, 2 2009-04-26 11:31 ttyUSB2
The script and script folders permissions are:
drwxrwxrwx 2 root root 4.0K 2009-04-26 11:46 .
drwxr-xr-x 23 root root 4.0K 2009-04-26 11:13 ..
-rwxr-xr-x 1 root root 95 2009-04-26 11:46 run_internet
One thing to note is that there are three udev devices associated with the modem. They are ttyUSB0, ttyUSB1 and ttyUSB2. I use ttyUSB2 to talk to the modem when connecting. Here are the files. If you require any more let me know:
The first udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="2000", SYSFS{idVendor}=="19d2", RUN+="/usr/bin/usb_modeswitch"
The second udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="0031", SYSFS{idVendor}=="19d2", MODE="0666", RUN+="/outputs/run_internet"
The script:
#!/bin/bash
/bin/echo script
/usr/bin/wvdial &
cp -f /etc/telstra_resolv.conf /etc/resolv.conf
The wvdial config file:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = ATS7=60 S30=0 S0=0
Init4 = AT+CGDCONT=1,"IP","telstra.internet"
Modem Type = Analog Modem
Baud = 9600
New PPPD = no
Modem = /dev/ttyUSB2
ISDN = 0
Dial Command=ATD
Phone = *99#
Password = user@bigpond.com
Username = password
Stupid Mode = 1
So what am I missing? I suppose it is related to device permissions. Why does the "mode" command not work? With what rights do udev rules run?
I am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies View Relatedtrying to connect to the internet using wvdial but facing problems. the command runs fine until i get PID ppd Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Oct 23 10:40:09 2010
--> Pid of pppd: 2520
nothing happens after this.. I checked the resolve.conf and it is empty. i put openDNS server addresses but still did not work.
I have just installed ubuntu 7.10 on my computer. The problem is getting it connected to the internet using my Sony Ericsson w580i as a modem. I have used my phone to connect to the internet on XP operating system easily. Please assist me and try to give me a more simplified step by step procedure.
View 9 Replies View Relatedsometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies View Relatedi am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedInstalled Ubuntu 9.1 - Linksys WUSB600 connects but no network access. I get "server not found", so no data being xmtted. It worked fine in ver 9.04 but not in 9.1
View 1 Replies View RelatedI recently installed the latest version of Kubuntu in a dual boot system with Windows XP on a Dell laptop. The dell laptop has a broadcom wireless device, and I was able to set up the driver and get wireless working. Then I booted into windows XP to make a whole bunch of updates/driver installations, and when I booted back into Kubuntu it would not connect to the wireless network. I am pretty sure the device is still active, because it picks up on the wireless networks in the area. But KWallet does not open to ask for my password on booting. Something is not set right, but I can't tell what.
View 1 Replies View Relatedubuntu I can not use a wireless modem huawei 160.type can only be used in windows.well to be used in my ubuntu linux? whether there is a script that used.
View 2 Replies View RelatedMy wireless modem has disappeared from the connection list at the top of the page. Strangely, a guest connection on that same modem is still visible but won't connect. I added the modem back in as a new connection and it was added to the list but it was greyed out and I still can't connect to it. The problem could, of course, be in the modem but I have no way to check that. Reset is not working. Lan connection to the modem works fine. This is the second time this has happened in the last week and I ended up reinstalling Ubuntu. This gave me back the wireless connection. I don't really want to have to do that again. Is there anything I can check in Ubuntu?
View 1 Replies View RelatedI installed 10.10, I'm using a HP tower with a cisco usb ae1000 modem. I have been on Linux all of 12 hours. I had installed on a old laptop, and hard wired to the router. I really liked the OS. And Long short I killed the laptop, literally.
So I partitioned the family tower, but I cannot connect wirelessly. And to run hard wire to the router would mean a complete tear down of my desk and set up in the living room area, and that will not help out the marriage long/short term.
on the internet connection and I gone through the panels trying to set up the connection but no luck. I'm running Vista and Ubuntu 10.10. I using vista to post here now.
How do I get it to find the wireless router and set up my connection without being hardwire to the router itself.
i have a samsung laptop.i recently installed ubuntu 11.04 on it.
I have a huawei WA1003A modem .In windows i connect to my modem wirelessly using (WLAN) facility after connecting it shows it has limited connectivity with the modem and then i connect to BSNL using username and password..then i get connected to internet..
In ubuntu I conncted to internet using the cable by making a new dsl connection i provided my user name and password. and then i switched on the modem connected the cable and connected to dsl connection and internet was connected.. . i want to connect it wirelessly.
in short : installed 9.10 on a dell inspiron 600m which has a broadcom bcm4401 ethernet and an intel PRO/Wireless LAN 2100 3B mini PCI. At this point, i'm not too picky about which one works (meaning neither of them currently work). nm-tool seems to pick up on both : the broadcom (eth0) is using the b44 driver, State is unavailable; the intel (eth1) is using the ipw2100 driver, it's State is disconnected.
i have encryption turned off, and the wireless sees a number of AP's (including mine).
i'm jumping off the good ship m$ and determined to make this work!
My Wireless worked once on Ubuntu but when I disconnected it i got stuck with connection trys that never succeed. On the two little lights only one is green, and when Ubuntu offers to have another try the password is not the same as the one I typed before (and of course is not the good one)
View 2 Replies View RelatedI am new to Linux and just put Ubuntu on my pc when i am using Ubuntu my wireless keeps connecting and disconnecting. Im not sure what I am suppose to do.
My laptop is a Sony Vaio NW130J
The wireless card/driver is Intel WiFi link 5100 AGN
I dont know anything about Linux so if you could please explain it as easy as possible.
just installed Ubuntu Netbook Remix on my new HP Mini 210 (info). Everything is working fine -- webcam, shortcut keys etc, but I'm having some difficulties connecting to our wireless network. When I click on the network panel item, there are no networks visible. Now, I also have Windows 7 Starter on the netbook (what I'm using right now) and that's able to connect to the network fine.
View 2 Replies View RelatedI have a computer running Ubuntu, and a MacBook Pro. I need to buy a decently cheap wireless router that I can hook up to my Ubuntu so that it will send wifi signals and I can use the wifi to go online with my MacBook Pro. I was about to get one today, but remembered how Ubuntu is picky about working with things like that. I'm only going to be using it to get signals around the house which isn't that big at all.
So what would be the cheapest and decently efficient wireless routers that I can use which Ubuntu will cooperate with?
I always have been a windows user and my brother decided to install Ubuntu 10.10 on my laptop, before he completed the full installation so I could use my wireless card. I have been reading various posts for the last two days and i am none the wiser. I have a linksys wireless G notebook WPC54G Ver.5. I have the software (drivers) for the card saved on my machine and have also installed NDISWrapper?
View 3 Replies View RelatedI just bought a new laptop. This one came with win7 home. The wireless works perfect. Today I installed ubuntu 10.4 next to windows. I made a first connection which went easy. But after 30 seconds it disconnects. Then it tries 30 seconds to reconnect. It reconnects and after 30 secodns or so, it disconnects again. It keeps doing this all the time on ubuntu while on windows it works without any problems. This is what sais under the device manager for my wirelesscard stuff:
Intel(R) WiFi 1000 BGN
Microsoft Virtual WiFi Miniport Adapter #2
Microsoft Virtual WiFi Miniport Adapter
Realtek PCIe GBE Family Controller
[Code]...
i have a Levano S10e intel atom preccessor and the net-book is not connecting wirelessly to the network. i have tried at two locations and even plugged in a exterlal wifi adapter. it wouldnt connect then either, the only way to get connected is to use a cat5 cable. here is the ifconfig output with no cat5 inserted and it not connecting to the internet.:
[Code]....
I have a 3g data card(LW272 GSM/WCDMA USB Modem with HSPADataCard) which is a type of multi-mode, 3G modem or card, applicable to 2G/3G networks; but it doesn't get recognised in Ubuntu 9.10. Actually, this device came with a software(for linux too) which makes calls and sms possible simultaneously while surfing. But while installation(from root terminal) i see a repeated trials of connecting to modem but it does not find the device(something wrong in installation), and the interface of the software also shows "No(U) Sim". Anyhow it doesn't bother me much if i m not able to avail the additional services( call and sms), but what i need is to make the modem recognisable so that i could configure the connection.
View 3 Replies View Related3G USB modem, in and using wireless router out (via ethernet) to lappy, Wii ect.We don't have a phone line just mobile phone and mobile internet because it is mobile.I have a wireless router only but need wireless to improve my standing within the house because I am seen as a net hog!
I did come across a Virgin wireless modem but it is soooo painfully slow (tested it against the USB dongle modem 3-4kb same test 1 min later 280-300kb's USB.) The wife could make herself a cuppa just waiting for the facebook login page to load!Would it need to pass on the connection bcause the USB is fully setup? then wireless is setup or would it be required to have a 3rd security setting ect in between?It would be good to use a low spec computer because I have a few. Headless too, maybe?