Fedora Networking :: 12 - Network Works Only For A Few Seconds (vmnet Conflict)?
Dec 7, 2009
I have a Fedora 12 box, which works absolutely fine in a fastweb wlan. However, if I connect to another wlan where I need to link to a wireless access point cabled to the ISP modem/router, networkmanager shows the connection is ok, but...
1) I only can browse internet (es:www.google.it) for a few seconds after the connection is established, thanfirefox goes "Impossible to reach the server"
2) the same behaviour is confirmed by ping
Code:
[Adriano@localhost ~]$ ping www.google.it
PING www.l.google.com (209.85.135.106) 56(84) bytes of data.
64 bytes from mu-in-f106.1e100.net (209.85.135.106): icmp_seq=1 ttl=49 time=138 ms
64 bytes from mu-in-f106.1e100.net (209.85.135.106): icmp_seq=2 ttl=49 time=127 ms
[code]....
EDIT: There is a win box in the same net that is working fine.I see in the router config that ARP for the working machine is "complete", while for the Fedora one is "incomplete" Nothing changes configuring a static or dynamic IP address for the Fedora box I had a previous Fedora 11 installation on the same machine that now gives troubles, and it worked fine. But I can't tell if it's a software problem because my ISP seems to have telnet-ed the router, changing it's firmware (and maybe it's config). Shame on they.
View 3 Replies
ADVERTISEMENT
Jul 3, 2009
I'm currently on F11, and experienced problems with Network Manager. Whenever I to connect to a network, wired or wireless, it just seems to try to connect, and then after 2-3 seconds, it just reports "Disconnected"..
Then I switched to network, and both wired and wireless works. so I don't think there is any driver or hardware issue...
Does anyone have any idea of this problem? The network manager have worked on the live CD version ( before installed to HD).
View 12 Replies
View Related
Jun 3, 2011
I'm working on setting up access for our developer via Telnet, we are on a local network behind a physical firewall. I set up the standard Telnet service for Fedora15 and from localhost I can login via any user and root.... However I cannot login from another terminal on the LAN, even though I can ping and FTP to the fedora15 box. I added the firewall rules for telnet, that did not work, so I disabled the firewall, still cannot get a connection via port 25. I feel either port 25 is closed in another manor or the telnet is restricted to the localhost.
Also I cannot login to root to configure the Firewall Desktop GUI, only standard users, is this an issue? I also cannot login to the console as root even though I use the correct password.I can only su to root and sometimes it is a PITA. There must be some settings to clear these issues up...
View 2 Replies
View Related
Jun 7, 2010
Basically upon logging network manager will connect to my network, and most of the time it will only last 20 seconds or so before it disconnects and tries to reconnects, this tends to go on for quite a while. Logging off and logging on over and over worked once, for this post I opened pages between the 15 seconds that i was connected and after 20 minutes it has remained connected (every time it stays connected for longer than 5 minutes it will never disconnect again) I followed the HOWTO thread so forgive me if most of this information is useless
1 ) Machine Brand and Model (Laptop): Asus 52jr is the model number
2 ) Wireless Brand, Model and Wireless Chipset:
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)is what I found from running lspci
3 ) check interface:
Code:
wlan0 Link encap:Ethernet HWaddr 1c:4b:d6:5c:61:8b
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1e4b:d6ff:fe5c:618b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 8 Replies
View Related
May 26, 2009
I have windows 2003 server which i stored some important data that the workstation will connect it or access by thru network connection...
My current setup is: i have a linux distro i used mandriva 2009 and i installed samba...if i used windows to browse in network i can see the name of the pc of linux and i can able to access the linux shared folder.
My problem is if the linux try to access the windows 2003 thru network it seems to be nothing happened coz everytime i click the linux network it shows me a blank after a few seconds...
I really dont have idea if there is any requirements for the windows.
I really want to implement the linux workstation but i still have a big problem issue in networking.
View 4 Replies
View Related
May 20, 2011
I have a system running 11.04 and it is dropping packets on the hardwired ethernet interface to other systems on the LAN, only in the inbound direction. It drops packets every 5 seconds. I verified this with iperf. Outbound packets pass with no problems. The network card in this system is a Broadcom Corporation NetXtreme BCM5752
View 9 Replies
View Related
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
View Related
Jun 19, 2010
I've troubles getting my new Sweex wireless 300N USB adapter to work. Tried searching in several directions (see closed thread). Further investigations shows however it is caused by the NDISGTK wrapper for Windows drivers. Can anyone tell me whether Sweex is shipping a faulty driver (it is the latest available) or it is a fault in ndisgtk? Or maybe I'm doing something stupid myself, which I do not find completely imagenary below some more detailed information on my findings: Started with network off and examined the networkstatus
Quote:
tpeelen@CC-desktop:~$ sudo lshw -C network
*-network DISABLED
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
[code]....
View 1 Replies
View Related
Mar 17, 2010
I installed 11.2 on VMware 6.03. My os is windows 7.When I try to go online a pop up showed up
View 1 Replies
View Related
Aug 17, 2010
My school has (once again) chosen to change their wireless network. This means it has gotten a lot slower, and that only our hotspot works. Our hotspot however is secured so that im unable to enter facebook, and a lot of other websites, etc. So what i did in windows was installing a program called hotspot shield, which redirects you ip through a server, so the LAN Admin basically have no control of what you're doing if he haven't got more skill than the one we have. I think what Hotspot shield does is making a vpn connection (correct me if im wrong) and i would certainly like to do that i ubuntu as well.
View 1 Replies
View Related
Oct 22, 2010
It has been a while and many ubuntu updates since i connected the windows laptop, it used to work fine but this ubuntu machine keeps telling me the cable is unplugged. When i boot into windows XP the network works fine and the laptop can connect through the network to use the internet. I have a very simple home network ... 3 pc into one switch. I am by no stretch of the imagination good with networking
View 7 Replies
View Related
Jun 8, 2011
I'm facing an odd problem with a fresh install of OpenSuse 11.4 on a Dell PE-2950, using NIC Broadcom BCM5708C (rev 12) NetXtream II. Driver's are up to date. I'd installed vsftpd and configure it. I can connect from anywhere in the network where I setup this Server. The odd problem is that when I'm sending a big file (5.5 GiB for example), from another PE-2950 server (Windows Server 2003 64 bits R2) with another BCM5708C nic, the speed of the transfer starts at 90 MiB/s approx. but after 30 seconds , it drops to 15 MiB/s and never raise again. Driver's are up to date too.
However, from another Server in the network, a Dell R710 with SLES 10 SP3, the transfer speed is at 90-100-110 MiB/s all the time. The switch is a HP Procurve 2910al-24G, with all ports at gigabit speed. I'd tried with different FTP clients in Windows: WinSCP and the Windows's ftp client, but the result is the same: speed falls down after 30 seconds approx. using the Windows-Box.
View 3 Replies
View Related
Feb 3, 2010
i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.
View 4 Replies
View Related
Jun 8, 2010
Could anybody confirm that the D-LINK DWA-556 wireless N PCI-E network card works with Lucid Lynx 64 bit? Im looking for a reliable wireless network card that if possible works out of the box on Lucid 64 bit, so far my search has lead me to the above card, If anyone has hands on experience of this card on lucid 64
View 2 Replies
View Related
Dec 13, 2008
I know this has been covered in many threads before, but I'm stuck not finding my exact situation or an answer. I'm a newbie using a Debian Linux machine as the client and Windows XP machine as the server. I have successfully mounted the XP Network drive on the Linux machine using commands from the root terminal:
mount -t smbfs -o username="Windows Username",password=windowspassword //XPcomputername/folder /mountpoint/
However when I put the command in the ect/fstab file as suggested in several posts, I don't get any result on boot up. I.e. I can't get the network drive to mount on start up, I always have to manually mount it from the root terminal.
View 7 Replies
View Related
Feb 5, 2010
I posted this already in the absolute beginner section, but no answer was found, so I thought I might try this place..Long story as short as possible:
- I installed Ubuntu 9.10 for a friend who was fed up with WinXP crashing all the time
- After the install, networks was broken. I could ping sites outside the LAN, could connect to the router via firefox, but NO application could access the web. - The router works just fine, I tried with my own notebook.
- Disabling ipv6 in grub (edit /etc/default/grub and 'sudo update-grub') seemed to solve the problem.
- Then update the standard packages + install restricted extras and boom, Network gone: No ping to sites outside the LAN, no nothing. Still can connect fine to the router and even the remote desktop connection works, connecting over the internet. But that's it.
I have tried setting the mpu to a value recommended by my isp, I have set static ip and dns, I really don't now what to try any more.
View 6 Replies
View Related
Apr 9, 2010
I am running fedora12 in my machine and used virtualbox. I have 3 virtual machine running linux, xp and fedora as well. I have used linux as my gateway and configured NAT for my xp and fedora machine which is under the ip of 192.168.1.0 network.. Everything is fine but often i get error message in my xp machine that says 'there is an ip address conflict'.I just wonder there are only 2 machine on that network and how can there be a ip conflict(i have used a static ip for xp and fedora virtual machine).My ip address for linux is (192.168.5.x and 192.168.1.101). XP (192.168.1.1). Fedora (192.168.1.50).
View 5 Replies
View Related
Jul 28, 2011
In application udp port listening with 3330 i am sending udp request from port 0.0.0.0:3330 to 0.0.0.0:3330 that is same port in the same machine....application works fine udp sending and receiving also fine.....for clarification ....is there any conflicts in the communication ?
View 2 Replies
View Related
Dec 4, 2009
I was particulary suprised to have nothing in my logs regarding an IP address conflict in Linux compared to the windows and its popup !Did I miss something in the logs ? Or is there someting to configure to have it ?Otherwise can I do something to have the date in the dmesg log file ?Here my story about this problem :My linux machine was monitored by Nagios so i've seen some Up/down/up/down phenomene when I came to work this morning. I tried to figured out what's wrong browsing the logs (messages & dmesg & mail/root)... but nothing usefull so far...Then I hearded that a collegue booted a old Windows machine the day before. I checked this machine and there was the classic windows popup regarding a IP address conflict! So that was the problem, the Windows machine have the same IP than de Linux box.I was particulary suprised to have nothing in my logs regarding an IP address conflict in Linux compared to the windows and its popup !Did I miss something in the logs ? Or is there someting to configure to have it ?Otherwise can I do something to have the date in the dmesg log file ?Linux : CentOS 5.4 64bitsWindows : Windows server 2003 32 bits
View 5 Replies
View Related
Aug 30, 2010
What happen if we assign a static IP address to both linux and windows host?Consider host A is a ubuntu machine and host B is a windows machine. I first set a static IP for host A (W.X.Y.Z) and connect to it through ssh. Then I duplicate that IP for host B (W.X.Y.Z).The result was that I could no longer connect to the ubuntu machine!
View 9 Replies
View Related
Feb 28, 2010
I recently installed 11.2 and Firefox takes several seconds to connect to each site.I pinged my machine, the gateway, the DNS servers (by IP address), and other various sites (by domain name), all without delay. But when I browse using Firefox, there's a 3-second delay while "looking up", and finally it connects. Any ideas what's causing this? I'm using Gnome and don't have another browser installed to test.
View 3 Replies
View Related
Mar 18, 2010
I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies
View Related
Nov 19, 2009
today i tried to install clam antivirus for my fedora ... i used the following command: yum install clamav it shows the following error message: Error: clamav-data-empty conflicts with clamav-data how to rectify this..
View 3 Replies
View Related
Jul 13, 2010
I'm having trouble working with Xen on debian, I have many centos servers running Xen and have no problems. Everytime I start or stop a XEN vm it kills networking on the host OS for about 30 seconds. It doesn't respond to pings or anything, then it returns and everything works. I have asked about this issue in #xen on freenode.
View 3 Replies
View Related
Dec 6, 2010
Morning, just installed lubuntu but having problems connecting to the wireless network. I find the network alright, however, the network authentication windows pops-up only to disappear 0.1 seconds later not giving me time to enter the network-code.
View 1 Replies
View Related
Sep 19, 2009
I installed codecs for playing songs and movies.but when I tried to play few songs,it says the corresponding codecs need to be installed.after resolving dependencies,it says the following, Local conflict between packages Two packages provide the same file. This is due to mixing packages from different software sources
Test Transaction Errors: file /usr/lib/gstreamer-0.10/libgstdeinterlace.so from install of gstreamer-plugins-bad-0.10.11-4.fc11.i586 conflicts with file from package gstreamer-plugins-good-0.10.15-4.fc11.i586
file /usr/lib/gstreamer-0.10/libgstflv.so from install of gstreamer-plugins-bad-0.10.11-4.fc11.i586 conflicts with file from package gstreamer-plugins-good-0.10.15-4.fc11.i586
[code]....
View 1 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Mar 29, 2009
I have installed apache. The problem is that localhost works but not the ip for viewing my hosted sites.
How can i rectify this error?
View 5 Replies
View Related
Sep 6, 2009
I used the following guides to try and get my Netgear WG511 PCMCIA card going:
[URL]
I also made a post about it here: [URL]. As the problem doesn't appear to be ndiswrapper itself I've made this separate post.
Unfortunately, I still end up having wlan0 attempting to connect, prompting for my password, trying to connect then prompting for my password (ad infinitum).
I changed my network security from WPA to WEP and now my card works fine. why this might be happening (i.e. why WEP works but WPA doesn't?)
View 2 Replies
View Related
Jul 4, 2009
httpd have been install by default and I don't start it as services. I have install apache2 but don't want to start as service, I can't add it into the chkconfig. When I try to remove httpd, fedora also want to remove these software.
gnome-user-share i586 2.26.0-2.fc11 installed 809 k
httpd-manual i586 2.2.11-8 installed 3.5 M
mod_perl i586 2.0.4-8 installed 6.3 M
[code]....
php and webalizer I don't care as I want to install the new version, but is their any problem removing the other one? Also I want to pount the apache2 documentroot to var/www/httpd but when I do this and try to see the website I got a 403 error (not autorize)
View 1 Replies
View Related
