Networking :: NAT Conflict In Ip Address?
Apr 9, 2010
I am running fedora12 in my machine and used virtualbox. I have 3 virtual machine running linux, xp and fedora as well. I have used linux as my gateway and configured NAT for my xp and fedora machine which is under the ip of 192.168.1.0 network.. Everything is fine but often i get error message in my xp machine that says 'there is an ip address conflict'.I just wonder there are only 2 machine on that network and how can there be a ip conflict(i have used a static ip for xp and fedora virtual machine).My ip address for linux is (192.168.5.x and 192.168.1.101). XP (192.168.1.1). Fedora (192.168.1.50).
View 5 Replies
ADVERTISEMENT
Dec 4, 2009
I was particulary suprised to have nothing in my logs regarding an IP address conflict in Linux compared to the windows and its popup !Did I miss something in the logs ? Or is there someting to configure to have it ?Otherwise can I do something to have the date in the dmesg log file ?Here my story about this problem :My linux machine was monitored by Nagios so i've seen some Up/down/up/down phenomene when I came to work this morning. I tried to figured out what's wrong browsing the logs (messages & dmesg & mail/root)... but nothing usefull so far...Then I hearded that a collegue booted a old Windows machine the day before. I checked this machine and there was the classic windows popup regarding a IP address conflict! So that was the problem, the Windows machine have the same IP than de Linux box.I was particulary suprised to have nothing in my logs regarding an IP address conflict in Linux compared to the windows and its popup !Did I miss something in the logs ? Or is there someting to configure to have it ?Otherwise can I do something to have the date in the dmesg log file ?Linux : CentOS 5.4 64bitsWindows : Windows server 2003 32 bits
View 5 Replies
View Related
Mar 17, 2010
I installed 11.2 on VMware 6.03. My os is windows 7.When I try to go online a pop up showed up
View 1 Replies
View Related
Apr 2, 2011
I've used ssh for a long time, but recently I set up a new server on my LAN. Often when I try to connect to it I get a message like so:
Code:
Warning: the ECDSA host key for '<snip>' differs from the key for the IP address '<snip>' Offending key for IP in /home/<snip>/.ssh/known_hosts:14 Matching host key in /home/<snip>/.ssh/known_hosts:12 Are you sure you want to continue connecting (yes/no)? What is weird is that, in the known_hosts file, the entry for the ip address (line 14) is a "ssh-rsa" type, but the entry for the hostname is a "ecdsa-sha2-nistp256", even though they both connect to the same server. What is going on here?
View 1 Replies
View Related
Jul 28, 2011
In application udp port listening with 3330 i am sending udp request from port 0.0.0.0:3330 to 0.0.0.0:3330 that is same port in the same machine....application works fine udp sending and receiving also fine.....for clarification ....is there any conflicts in the communication ?
View 2 Replies
View Related
Aug 30, 2010
What happen if we assign a static IP address to both linux and windows host?Consider host A is a ubuntu machine and host B is a windows machine. I first set a static IP for host A (W.X.Y.Z) and connect to it through ssh. Then I duplicate that IP for host B (W.X.Y.Z).The result was that I could no longer connect to the ubuntu machine!
View 9 Replies
View Related
Feb 24, 2010
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
View 5 Replies
View Related
May 12, 2011
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
View 1 Replies
View Related
Apr 24, 2010
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
View 2 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 12, 2011
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies
View Related
May 7, 2010
I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies
View Related
Dec 7, 2009
I have a Fedora 12 box, which works absolutely fine in a fastweb wlan. However, if I connect to another wlan where I need to link to a wireless access point cabled to the ISP modem/router, networkmanager shows the connection is ok, but...
1) I only can browse internet (es:www.google.it) for a few seconds after the connection is established, thanfirefox goes "Impossible to reach the server"
2) the same behaviour is confirmed by ping
Code:
[Adriano@localhost ~]$ ping www.google.it
PING www.l.google.com (209.85.135.106) 56(84) bytes of data.
64 bytes from mu-in-f106.1e100.net (209.85.135.106): icmp_seq=1 ttl=49 time=138 ms
64 bytes from mu-in-f106.1e100.net (209.85.135.106): icmp_seq=2 ttl=49 time=127 ms
[code]....
EDIT: There is a win box in the same net that is working fine.I see in the router config that ARP for the working machine is "complete", while for the Fedora one is "incomplete" Nothing changes configuring a static or dynamic IP address for the Fedora box I had a previous Fedora 11 installation on the same machine that now gives troubles, and it worked fine. But I can't tell if it's a software problem because my ISP seems to have telnet-ed the router, changing it's firmware (and maybe it's config). Shame on they.
View 3 Replies
View Related
Jun 7, 2009
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies
View Related
Oct 6, 2010
In my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies
View Related
Oct 28, 2010
I dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
Code:
telnet mylinux 443
it responds
[code]...
View 9 Replies
View Related
May 29, 2011
how to assign a address to my ethernet card all the options available
View 1 Replies
View Related
Jan 18, 2010
I have a dedicated control computer that can only be accessed with web-browser (with its ip-address). My DHCP-server gives a static ip-address to the control computer (base on its mac-address). Somehow and after some time the control computer looses its ip-address (can't ping to it any more) ... and then I have to reset the control computer to get it to pick up the ip-address ... this is not a good solution since the control computer is not nearby. is there a way to force the control computer to renew its ip-address based on its mac-address
View 1 Replies
View Related
Apr 18, 2011
My security software has picked up multiple port scanning detections on my router/network and only the IP addresses are available. Is it possible to find out what the remote mac address is to see if the IP source has been spoofed? I've got a couple of different IP sources which were found scanning my ports.
I don't know if my IP and the remote IP address are on the same network or subnet for that matter which is the reason for my wanting to know what the mac address is to find out if its coming from the same remote machine.
View 8 Replies
View Related
Oct 1, 2010
how to get the mac address from given ip address
View 3 Replies
View Related
Jun 8, 2010
i know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 192.168.1.6 this connects to the router that has internet access.eth0 i intend to have the following settingsip:192.168.0.1sub: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: 192.168.0.100sub: 255.255.255.0gateway 192.168.0.1i have then set the router IP for LAN handling as 192.168.27.1 and all ethernet connections will have a 192.168.27.x IP.
so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through
View 1 Replies
View Related
Jul 6, 2011
I have one router, a linksys. It allows wireless and wired connections, as is normal. I have two XP machinesby wire to the router and three linux machines connected wirelessly. The XP machines both have IP addresses beginning with 192.168. while my three linux machines have IP addresses that all begin with 172. None of the machines is connected with a static IP address. All are automatic DHCP.I am told that the above scenario makes no sense. However, such is what I have so, I trust, the theory and the fact do not gel. I would not care except that I cannot see - using the nautilus network servers program, all of the XP computers with some of my linux boxes.
View 9 Replies
View Related
Jan 20, 2010
I installed a copy of Kubuntu on my desktop at work yesterday & I was able to connect to the Internet just fine then but today when I came in I can not get an IP address, from what I can tell. ifconfig just lists the following. eth0 Link encap:Ethernet HWaddr 00:08:74:bc:b0:59 inet6 addr: fe80::208:74ff:febc:b059/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:278 errors:0 Dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17792 (17.7 KB) TX bytes:3952 (3.9 KB) Interrupt:17
View 8 Replies
View Related
Mar 26, 2015
Do you see any conflict when the Bus Id of the GDU is 06:04.0 (inboard Matrox) and the Bus Id of an audio card is 04:04.0 (Xonar DX) ?
View 8 Replies
View Related
Nov 19, 2009
today i tried to install clam antivirus for my fedora ... i used the following command: yum install clamav it shows the following error message: Error: clamav-data-empty conflicts with clamav-data how to rectify this..
View 3 Replies
View Related
Sep 14, 2009
Im an academic (university networks and security lecturer) studying/teaching network and operating system security, and inspired by the work of Hovav Shacham set about testing ASLR on linux. Principley I did this by performing a brute force buffer overflow attack on Fedora 10 and Ubuntu 9. I did this by writting a little concurrent server daemon which accidently on purpose didnt do bounds checking.
I then wrote a client to send it a malicious string brute forcing guessed addresses which caused a return-to-libc to the function usleep with a parameter of 16m causing a delay of 16 seconds as laid out in [URL] Once I hit the delay I new I had found the function and could calculate delta_mmap allowing me to create a standard chained ret-to-libc attack. All of that works fine. However .... To complete my understanding I am trying establish where I can find the standard base address for ubuntu 9 (and other distros) for the following, taken from Shacham:-
Quote:
[code]....
/proc/uid/maps gives me some information but not the base address ldd also gives me the randomised starting address for sections in the user address space but neither gives me the base address. Intrestingly ... when a run ldd with aslr on for over (about) 100 times and checked the start point of libc I determined that the last 3 (least significant) hex digits were always 0's and the fist 4 (most significant) where between 0xB7D7 and 0xB7F9. To me this indicated that bits 22-31 were fixed and bits 12-21 were randomized with bits 11-0 fixed. Although even that doesnt define the boundaries observed correctly.
Note: I am replicating the attack to provide signatures to detect it using IDS, and for teaching purposes. I am NOT a hacker and if needed to could reply from my .ac.uk email address as verification.
View 1 Replies
View Related
Apr 1, 2011
I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
View 1 Replies
View Related
Feb 21, 2011
if i attach a shared memory to my process whch part of the address space it will add(like stack, heap, data, code...).
View 3 Replies
View Related
Apr 7, 2010
i want to get IP Address of users behind NAT..(192.x.x.x)is it possible?the topology:wireless AP using NAT (192.x.x.x) => Local Area Network (172.x.x.x) => Internet
View 2 Replies
View Related
Nov 19, 2010
I just installed ubuntu 10.10 on my laptop Dell Inspiron 1525. Wireless internet is not working. I installed wicd network manager and I am able to see the available wireless networks. My wireless connection is encrypted. I have tried all encrypted options with the key but no avail. It says "Cannot obtain an IP address" after validating authentication.
View 4 Replies
View Related
