Ubuntu Networking :: Sudo Iwlist Scan Works But Cannot Connect To Network Using Network Manager
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
ADVERTISEMENT
Nov 14, 2010
I'm running Ubuntu 10.04 server 64bit. I'm trying to get my ASUS PCE-N13 wireless PCI card working for searching and connecting to wireless networks. But I have no networks applet appearing in the panel. system->preferences->sessions has the Network Manager enabled The Notification Area is added to the panel. system->preferences-Network Connections-->Wireless[tab] shows a pink box, with no available connections.
[Code]....
View 9 Replies
View Related
Feb 3, 2010
i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.
View 4 Replies
View Related
Jul 1, 2010
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
View 5 Replies
View Related
Jul 10, 2010
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
View 3 Replies
View Related
Mar 26, 2011
I have a netbook with a onboard WIFI card(Broadcom 5727(rev 01)) and a Realtek RTL8191S USB WIFI donge. Both work.
My problem is; I can't get these to scan for AP's running on channel 12 and 13.
Is there a way to fix this?
Distro: Slackware 13.1
Kernel: 2.6.33.4-smp
View 1 Replies
View Related
Jul 3, 2009
I'm currently on F11, and experienced problems with Network Manager. Whenever I to connect to a network, wired or wireless, it just seems to try to connect, and then after 2-3 seconds, it just reports "Disconnected"..
Then I switched to network, and both wired and wireless works. so I don't think there is any driver or hardware issue...
Does anyone have any idea of this problem? The network manager have worked on the live CD version ( before installed to HD).
View 12 Replies
View Related
Jun 24, 2010
generally whenever there is a wifi connection available fedora will detect and i can establish the connection but today i am not able to see any such wireless network available. I am in a wifi accessible area and i need to know how this can be rectified. i tried iwlist scan in the terminal but that doesnt seem to work
View 1 Replies
View Related
Jan 29, 2011
Yhe only ptoblem was that he had forgotten the password to his network. This was really anoying and has happened before sp yesterday i decided to install some kind of WEP cracking tool so that it would not happen anymore.. After using sometime without getting anything to work i found this tutorial: [URL]
and started following it. i only got to the point where he has updated his computer using update manager and is about to patch his wificard. Then i noticed that the network manager for gnome was gone and the virtualbox logo in my top panel was changed to a red circle with a line running through it. I have tried to download network manager from another computer and installing it on my laptop but it needs internet to install. Then i tried to connect to my local network using terminal that did't work either i also tried connecting using a cable but had no luck connecting. The command iwconfig gives me:
[Code]....
View 4 Replies
View Related
Mar 20, 2010
I'm running Ubuntu Karmic Server with Xfce desktop, the problem is the network manager, it says it is disconnected, even though I am connected to my network and getting an internet connection. It wouldn't normally bother me, but I'm trying to setup a VPN using the network-manager-openvpn plugin. I put in the required details for the VPN connection, but as soon as I tick the "apply to all users" box, the information is lost. The information will remain if I don't tick that box, but it will not connect. when I try to select the VPN connection I just setup, nothing happens.
I've tried the exact same configuration on another desktop, running Ubuntu Karmic with Gnome desktop, the network manager works fine, my ethernet connection is showing as connected, and I can connect to the VPN no problem, the problem lies with the network manager in Xfce. Is there anyway I can get it to show as connected? it wont allow me to connect to the VPN otherwise, it's silly, because that adapter has a full working network connection.
View 9 Replies
View Related
Jul 23, 2010
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
View 9 Replies
View Related
Dec 26, 2010
i was fed up after i can't connect to wifi using ubuntu. the problem happened after my router is being replaced to a new one because the old one got struck by lightning. good thing i dual-boot my laptop so i can access the internet using Windows 7 now.
i use the default network manager to connect to wifi before, but it all seem to be failed after the replacement of router. i also used Wicd but it failed to connect either. it says in the notification "disconnected: bad password" but the password was right. my wifi used WEP password with open authentication.
i even remove the WEP password and try to connect, but it failed. all i can do is to boot in windows 7 and surf internet there. what could cause this problem? is it the router, the telephone line? i can set the router settings if i want, but i don't know what causes the problem.
View 1 Replies
View Related
Apr 15, 2010
All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies
View Related
Jan 10, 2010
the thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.
View 5 Replies
View Related
Mar 24, 2010
I followed (or at least tried to follow) tutorials on doing this. I installed network-manager-pptp and tried to configure network manager to connect to a VPN. In the settings when I select MPPE with 128-bit encryption, after I've selected it and applied it, I check the settings and it's invariably unchecked. I tried using KVpnc after getting frustrated with network manager, and I can't seem to get that working either. I've been trying to search for info on this, and I can't seem to find anything on why I can't select MPPE with 128-bit encryption. That seems like it might be why I'm unable to connect to the VPN?
View 1 Replies
View Related
Jul 2, 2010
I have a problem with network manager. I use Ubuntu 10.04 on a Dell Latitude D530. I used to have the same problem with Ubuntu 9.10 before I upgraded. I typically connect to two wireless networks: HOME and WORK. Both networks are set to automatic connection mode. I am at work, I connect to the network WORK. At the end of the day, I just close the lid and go home. At home, I open the lid and have the following problem: network manager still displays the network WORK whereas it is clearly out-of-range and it automatically tries to connect to it. It does so until network manager asks if the password is correct.
If I want to connect to HOME, I have to tell network manager to do so. Then, I receive a notification that I am disconnected to WORK. Next morning, I go to work, and I have the same problem, network manager tries to automatically connect to HOME. What I would expect from network manager: when I am at home, NM automatically connects to HOME and does not display WORK, when I am at work, NM automatically connects to WORK and does not display HOME.
View 3 Replies
View Related
Sep 15, 2010
I have ticked the box Connect Automatically in the OpenVPN setup I configured in the gnome network manager but it doesn't connect on startup. It connects perfectly ok if I manually select the VPN but i'd like it work immediately on launch.
I have autologin on Ubuntu but since there is no VPN password to decrypt I don't see why it should be a problem.
View 2 Replies
View Related
Nov 20, 2010
i have HP Compaq 6710b with Wlan Broadcom 4321AG i can't connect to network and i can't scan
View 6 Replies
View Related
Jul 30, 2010
I am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
View 17 Replies
View Related
Feb 9, 2010
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies
View Related
Apr 2, 2011
This is on Lucid, using a Dell Mini. I installed the required packages for a USB tether to my iPhone. Network Manager recognized it immediately as wwan0, but it doesn't connect. Also, it never asks me for the password to connect to the Personal Hotspot (as it does when I can connect from Windows).
View 3 Replies
View Related
Apr 13, 2011
I have a 5720 Mini PCIE broadband modem card and though it works, it won't connect automatically in a Ubuntu system. Network Manager says it is enabled when I right click on the icon, but when I do a left click it says it is disabled. I have to right click and disable and then enable before my Verizon connection will work.
View 1 Replies
View Related
Feb 25, 2010
I have updated the system this morning and the vpn stopped working!It gives me an error: invalid secrets.I use network manager to connect to a pptp vpn connection, I use fedora 12.Does anyone know the problem?
View 2 Replies
View Related
Sep 15, 2010
I successfully installed openvpn and networkmanager openvpn plugin. Then I successfully added a PPTP vpn connection by networkmanager vpn tab which name is "vpn1". But now I don't know how to connect to this PPTP vpn connection. I tried bellow command but no luck.
openvpn --config vpn1.config
View 3 Replies
View Related
Apr 28, 2011
I have been an Ubuntu user for a year or so. My level is still ultra n00b but I am trying. Whenever I update Ubuntu there is always a WiFi problem, always. So now I am having problems getting wifi to work in 10.10. In Network Manager I can view wifi networks fine but I cannot connect. I tried with wicd also but I got as far as "getting ip" and then it would hang up.
lspci
Code:
Code:
Code:
I am not sure what driver I am using as I don't know how to exactly ID my driver. I know there is a way to ID the driver using airodump-ng but I have yet to find it.
I have a feeling this is a driver issue as one time I was able to establish a connection that then dropped a few minutes later. I have a feeling I should be disabling/removing the current driver and replacing it with ipw3945 or possibly a driver ndiswrapped? The problem is I cannot figure out how to remove the current driver.
I was going to switch back to 9.04 but I thought I would try to manually figure this one out instead of taking the easy way.
View 2 Replies
View Related
Aug 1, 2010
I have just started using fedora 13 and I am not sure if i am in the right area but here goes...today I was online in my fedora 13 partition on my laptop and I had been online for quite a while then I shut down my machine to recharge the battery then a couple hours later I turned it back on and all of a sudden my network manager applet was missing and I could not connect to the internet, I opened firefox and tried to get to my homepage but it basically just told me that I wasnt connected..
I suspected at first for some strange reason that MAYBE it was my NIC so I booted up into my vista partition and low and behold the internet works fine, so the problem is on the linux side, I have tried every command nm-applet but it just keeps saying an instance of nm-applet is already running, I have no clue how to restore the network manager and get my internet back and the only other piece of information I have is that earlier today I did do a bunch of security updates but the internet was working fine all day even after several reboots through out the day.
View 1 Replies
View Related
Jul 27, 2010
Recently i was fixing a permissions error on my home folder. In the process i ran accidentally chmod 777 in the root directory. BIG mistake. Now i cant run sudo, or start network manager. I am currently on vacation and made a bootable version ov ubuntu on my flash drive, but i wouldn't boot. I think it is because i chmod'ed the grub folder (with is in the root) I have a boot CD a home, but is there anyway to fix it beforehand?
View 7 Replies
View Related
Feb 2, 2011
I have a Linksys AE1000 wireless adapter and I used the post found here to install the drivers.I've figure I installed the drivers successfully because when I use "iwlist ra0 scan" I get a listing of available networks.The problem is, I can only connect to unsecured networks. For instance,
Code:
sudo iwconfig ra0 essid "unsecure network"
The above command connects me but the one below doesn't
[code]....
View 2 Replies
View Related
Jan 22, 2010
I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
View 6 Replies
View Related
Mar 12, 2009
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
View 10 Replies
View Related
